Securing Okapi Installation

This is a quick guide on how to use the FOLIO auth complex to secure an Okapi installation. We hope that this process will be automated at some point.

Running the examples

The example 'curl' commands are explained below. First ensure that Okapi and the required modules are ready, as explained in these initial sections. Then copy-and-paste them to another command-line console.

After you are satisfied, then subsequent runs can be expedited. As with the Okapi guide, this one-liner can be used to extract the sample data into /tmp and run the curl commands:

perl -n -e 'print if /^```script/../^```$/;' okapi/doc/securing.md | sed '/```/d' | sh -x

All the shell commands assume you are in your top-level directory, for example ~/folio. All modules are assumed to reside under it, each in its own directory.

Okapi itself

Getting Okapi

This script assumes you have a fresh Okapi instance running, with nothing installed in it. If you do not, you can get one up by running the following:

git clone https://github.com/folio-org/okapi
cd okapi
#git checkout "v2.3.1"  # Or "master" if you want the latest, or any other tag
mvn clean install
cd ..

The build takes a while. (It will go faster if you append -DskipTests to the mvn command line.)

Check that near the end there is a line that says:

[INFO] BUILD SUCCESS

Initializing a fresh database

You need to have a database to store all these things in, and you should start with clean state.

Create a database user:

  sudo -u postgres -i
   createuser -P -s okapi   # When it asks for a password, enter okapi25
   createdb -O okapi okapi

Note the -s, that gives the user superuser rights, which are needed in the tenant interface calls. If you have followed the Okapi guide, you probably have created the okapi user, but without the superuser bit. You can give the superuser privs with something like

sudo -u postgres psql -c "ALTER USER okapi  WITH SUPERUSER"

TODO: Set up the same way as Wayne does. See https://github.com/folio-org/folio-ansible/blob/master/roles/postgresql/tasks/main.yml

See the Storage section of the Okapi guide for details of setting up your database. Then run:

java -Dstorage=postgres -jar okapi/okapi-core/target/okapi-core-fat.jar initdatabase

Starting Okapi

java -Dstorage=postgres -jar okapi/okapi-core/target/okapi-core-fat.jar dev

In the end you should have Okapi running in a console window, and listening on port 9130. You can verify it is running by listing the tenants:

curl -w '\n' -D - http://localhost:9130/_/proxy/tenants

HTTP/1.1 200 OK
Content-Type: application/json
X-Okapi-Trace: GET okapi-2.16.1-SNAPSHOT /_/proxy/tenants : 200 11141us
Content-Length: 105

[ {
  "id" : "supertenant",
  "name" : "supertenant",
  "description" : "Okapi built-in super tenant"
} ]

Note on the curl command line options:

-w '\n' causes curl to output a newline after the operation
-D - causes curl to output the response headers to stdout

Required modules

This script requires the following modules:

mod-permissions
mod-users
mod-login
mod-authtoken

The following commands fetch and compile the modules. We use the tip of the master branches here, but beware, things may change under your feet. You can add a git checkout to get to a known good version.

git clone --recursive https://github.com/folio-org/mod-permissions
cd mod-permissions
git checkout master # v5.2.5 is okay
mvn clean install
cd ..

git clone --recursive https://github.com/folio-org/mod-users
cd mod-users
git checkout master # v15.1.0 is okay
mvn clean install
cd ..

git clone --recursive https://github.com/folio-org/mod-login
cd mod-login
git checkout master # v4.0.1 is okay
mvn clean install
cd ..

git clone https://github.com/folio-org/mod-authtoken
cd mod-authtoken
git checkout master # v1.4.1 is okay
mvn clean install
cd ..

Order of operations

Basically we just need to declare, deploy, and enable the modules declared above, and load some data into them.

Declaring and deploying the modules can be done in any order, but we have to be careful with the order of enabling them. Specifically, we may not enable mod-authtoken until the very end, when we have all the other modules in place and loaded with data, as mod-authtoken will not let us finish the process, locking us out of our own system.

Declaring the modules

The module descriptors are generated from a template during the build process.

Where ever they come from, we just need to POST them to Okapi.

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d @mod-permissions/target/ModuleDescriptor.json \
  http://localhost:9130/_/proxy/modules

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d @mod-users/target/ModuleDescriptor.json \
  http://localhost:9130/_/proxy/modules

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d @mod-login/target/ModuleDescriptor.json \
  http://localhost:9130/_/proxy/modules

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d @mod-authtoken/target/ModuleDescriptor.json \
  http://localhost:9130/_/proxy/modules

You can verify we have all four modules properly declared:

curl -w '\n' -D -  http://localhost:9130/_/proxy/modules

This should list five modules, the 4 declared above, and Okapi's internal module.

Setting up the database environment

All the modules need to know how to talk to the database. The easiest way is to set up some environment variables, by POSTing them to Okapi.

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d '{"name":"DB_HOST", "value":"localhost"}' \
  http://localhost:9130/_/env

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d '{"name":"DB_PORT", "value":"5432"}' \
  http://localhost:9130/_/env

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d '{"name":"DB_USERNAME", "value":"okapi"}' \
  http://localhost:9130/_/env

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d '{"name":"DB_PASSWORD", "value":"okapi25"}' \
  http://localhost:9130/_/env

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d '{"name":"DB_DATABASE", "value":"okapi"}' \
  http://localhost:9130/_/env

Deploying the modules

Now we need to deploy the modules. Here we simply use the default deployment descriptors that are provided by each module for its development purposes, so there is some tweaking required.

mod-permissions

cat mod-permissions/target/DeploymentDescriptor.json \
  | sed 's/..\///' | sed 's/embed_postgres=true//' > /tmp/deploy-permissions.json

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d @/tmp/deploy-permissions.json \
  http://localhost:9130/_/discovery/modules

mod-users

cat mod-users/target/DeploymentDescriptor.json \
  | sed 's/..\///' | sed 's/embed_postgres=true//' > /tmp/deploy-users.json

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d @/tmp/deploy-users.json \
  http://localhost:9130/_/discovery/modules

mod-login

cat mod-login/target/DeploymentDescriptor.json \
  | sed 's/..\///' | sed 's/embed_postgres=true//' > /tmp/deploy-login.json

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d @/tmp/deploy-login.json \
  http://localhost:9130/_/discovery/modules

mod-authtoken

cat mod-authtoken/target/DeploymentDescriptor.json \
  | sed 's/..\///' | sed 's/embed_postgres=true//' > /tmp/deploy-authtoken.json

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -d @/tmp/deploy-authtoken.json \
  http://localhost:9130/_/discovery/modules

You can see all four modules deployed with:

curl -w '\n' -D - http://localhost:9130/_/discovery/modules

Enabling modules and loading data

Enable the modules for our supertenant. We do not need to specify the version number here, Okapi will choose the latest (and only) version we have declared.

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
   -d'{"id":"mod-permissions"}' \
   http://localhost:9130/_/proxy/tenants/supertenant/modules

Create our superuser in the perms module

cat > /tmp/permuser.json <<END
{ "userId":"99999999-9999-4999-9999-999999999999",
  "permissions":[ "okapi.all" ] }
END

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -H "X-Okapi-Tenant:supertenant" \
  -d@/tmp/permuser.json \
   http://localhost:9130/perms/users

Enable mod-users

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -H "X-Okapi-Tenant:supertenant" \
  -d'{"id":"mod-users"}' \
  http://localhost:9130/_/proxy/tenants/supertenant/modules

Create our superuser in mod-users

cat > /tmp/superuser.json <<END
{ "id":"99999999-9999-4999-9999-999999999999",
  "username":"superuser",
  "active":"true",
  "personal": {
     "lastName": "Superuser",
     "firstName": "Super"
  }
}
END

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -H "X-Okapi-Tenant:supertenant" \
  -d@/tmp/superuser.json \
   http://localhost:9130/users

mod-login

Enable the login module:

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -H "X-Okapi-Tenant:supertenant" \
  -d'{"id":"mod-login"}' \
  http://localhost:9130/_/proxy/tenants/supertenant/modules

And create a login user:

cat >/tmp/loginuser.json << END
{ "username":"superuser",
  "password":"secretpassword" }
END

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -H "X-Okapi-Tenant:supertenant" \
  -d@/tmp/loginuser.json \
   http://localhost:9130/authn/credentials

mod-authtoken

When we enable mod-authtoken, the system is finally locked up.

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -H "X-Okapi-Tenant:supertenant" \
  -d'{"id":"mod-authtoken"}' \
  http://localhost:9130/_/proxy/tenants/supertenant/modules

Log in

We can reuse the credentials we used for creating the login user. We need to save the headers in /tmp, so we can extract the auth token.

curl -w '\n' -D /tmp/loginheaders -X POST  \
  -H "Content-type: application/json" \
  -H "X-Okapi-Tenant:supertenant" \
  -d@/tmp/loginuser.json \
   http://localhost:9130/authn/login

cat /tmp/loginheaders | grep -i x-okapi-token | sed 's/ //g' > /tmp/token
echo "Got token " `cat /tmp/token`

Verify that we need a token

Try to create a new tenant, without the token. Should fail.

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -H "X-Okapi-Tenant:supertenant" \
  -d'{"id":"failure","name":"not permitted"}' \
   http://localhost:9130/_/proxy/tenants

Verify that the token works

curl -w '\n' -D - -X POST  \
  -H "Content-type: application/json" \
  -H "X-Okapi-Tenant:supertenant" \
  -H `cat /tmp/token` \
  -d'{"id":"testtenant","name":"Simple test"}' \
   http://localhost:9130/_/proxy/tenants

Cleaning up

If you need to clean up the things you have created, you need to do two things: Drop all schemas and roles we have created, and drop and recreate the whole database. Run something like sudo -u postgres psql okapi and paste the following commands into it:

DROP SCHEMA supertenant_mod_login CASCADE;
DROP ROLE supertenant_mod_login;

DROP SCHEMA supertenant_mod_users CASCADE;
DROP ROLE supertenant_mod_users;

DROP SCHEMA supertenant_mod_permissions CASCADE;
DROP ROLE supertenant_mod_permissions;
\q

Then run the two commands below:

sudo -u postgres dropdb okapi
sudo -u postgres createdb -O okapi okapi

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

securing.md

securing.md

Securing Okapi Installation

Running the examples

Okapi itself

Getting Okapi

Initializing a fresh database

Starting Okapi

Required modules

Order of operations

Declaring the modules

Setting up the database environment

Deploying the modules

mod-permissions

mod-users

mod-login

mod-authtoken

Enabling modules and loading data

Create our superuser in the perms module

Enable mod-users

mod-login

mod-authtoken

Log in

Verify that we need a token

Verify that the token works

Cleaning up

Files

securing.md

Latest commit

History

securing.md

File metadata and controls

Securing Okapi Installation

Running the examples

Okapi itself

Getting Okapi

Initializing a fresh database

Starting Okapi

Required modules

Order of operations

Declaring the modules

Setting up the database environment

Deploying the modules

mod-permissions

mod-users

mod-login

mod-authtoken

Enabling modules and loading data

Create our superuser in the perms module

Enable mod-users

mod-login

mod-authtoken

Log in

Verify that we need a token

Verify that the token works

Cleaning up