Skip to content

Latest commit

 

History

History
157 lines (121 loc) · 15.5 KB

salesforce.md

File metadata and controls

157 lines (121 loc) · 15.5 KB
Raw

Salesforce

Setting up the Salesforce source connector involves creating a read-only Salesforce user and configuring the Salesforce connector through the Airbyte UI.

This page guides you through the process of setting up the Salesforce source connector.

Prerequisites

  • Salesforce Account with Enterprise access or API quota purchased
  • Dedicated Salesforce user (optional)
  • (For Airbyte Open Source) Salesforce OAuth credentials

Step 1: (Optional, Recommended) Create a read-only Salesforce user

While you can set up the Salesforce connector using any Salesforce user with read permission, we recommend creating a dedicated read-only user for Airbyte. This allows you to granularly control the data Airbyte can read.

To create a dedicated read only Salesforce user:

  1. Log into Salesforce with an admin account.
  2. On the top right of the screen, click the gear icon and then click Setup.
  3. In the left navigation bar, under Administration, click Users > Profiles. The Profiles page is displayed. Click New profile.
  4. For Existing Profile, select Read only. For Profile Name, enter Airbyte Read Only User.
  5. Click Save. The Profiles page is displayed. Click Edit.
  6. Scroll down to the Standard Object Permissions and Custom Object Permissions and enable the Read checkbox for objects that you want to replicate via Airbyte.
  7. Scroll to the top and click Save.
  8. On the left side, under Administration, click Users > Users. The All Users page is displayed. Click New User.
  9. Fill out the required fields:
    1. For License, select Salesforce.
    2. For Profile, select Airbyte Read Only User.
    3. For Email, make sure to use an email address that you can access.
  10. Click Save.
  11. Copy the Username and keep it accessible.
  12. Log into the email you used above and verify your new Salesforce account user. You'll need to set a password as part of this process. Keep this password accessible.

Step 2: Set up Salesforce as a Source in Airbyte

For Airbyte Cloud

To set up Salesforce as a source in Airbyte Cloud:

  1. Log into your Airbyte Cloud account.
  2. In the left navigation bar, click Sources. In the top-right corner, click + New source.
  3. On the Set up the source page, select Salesforce from the Source type dropdown.
  4. For Name, enter a name for the Salesforce connector.
  5. Toggle whether your Salesforce account is a Sandbox account or a production account.
  6. For Start Date, enter the date in YYYY-MM-DD format. The data added on and after this date will be replicated. If this field is blank, Airbyte will replicate all data.
  7. (Optional) In the Salesforce Object filtering criteria section, click Add. From the Search criteria dropdown, select the criteria relevant to you. For Search value, add the search terms relevant to you. If this field is blank, Airbyte will replicate all data.
  8. Click Authenticate your account to authorize your Salesforce account. Airbyte will authenticate the Salesforce account you are already logged in to. Make sure you are logged into the right account.
  9. Click Set up source.

For Airbyte OSS

To set up Salesforce as a source in Airbyte Open Source:

  1. Follow this walkthrough with the following modifications:

    1. If your Salesforce URL’s is not in the X.salesforce.com format, use your Salesforce domain name. For example, if your Salesforce URL is awesomecompany.force.com then use that instead of awesomecompany.salesforce.com.
    2. When running a curl command, run it with the -L option to follow any redirects.
    3. If you created a read-only user, use the user credentials when logging in to generate OAuth tokens.

  2. Navigate to the Airbute Open Source dashboard and follow the same steps as setting up Salesforce as a source in Airbyte Cloud.

Supported sync modes

The Salesforce source connector supports the following sync modes:

Incremental Deletes Sync

The Salesforce connector retrieves deleted records from Salesforce. For the streams which support it, a deleted record will be marked with the field isDeleted=true value.

Performance considerations

The Salesforce connector is restricted by Salesforce’s Daily Rate Limits. The connector syncs data until it hits the daily rate limit, then ends the sync early with success status, and starts the next sync from where it left off. Note that picking up from where it ends will work only for incremental sync, which is why we recommend using the Incremental Sync - Deduped History sync mode.

Supported Objects

The Salesforce connector supports reading both Standard Objects and Custom Objects from Salesforce. Each object is read as a separate stream. See a list of all Salesforce Standard Objects here.

Airbyte fetches and handles all the possible and available streams dynamically based on:

  • If the authenticated Salesforce user has the Role and Permissions to read and fetch objects

  • If the stream has the queryable property set to true. Airbyte can fetch only queryable streams via the API. If you don’t see your object available via Airbyte, check if it is API-accessible to the Salesforce user you authenticated with in Step 2.

Note: BULK API cannot be used to receive data from the following streams due to Salesforce API limitations. The Salesforce connector syncs them using the REST API which will occasionally cost more of your API quota:

  • AcceptedEventRelation
  • AssetTokenEvent
  • AttachedContentNote
  • Attachment
  • CaseStatus
  • ContractStatus
  • DeclinedEventRelation
  • EventWhoRelation
  • FieldSecurityClassification
  • OrderStatus
  • PartnerRole
  • QuoteTemplateRichTextData
  • RecentlyViewed
  • ServiceAppointmentStatus
  • SolutionStatus
  • TaskPriority
  • TaskStatus
  • TaskWhoRelation

Salesforce tutorials

Now that you have set up the Salesforce source connector, check out the following Salesforce tutorials:

Changelog

Version Date Pull Request Subject
1.0.11 2022-07-07 13729 Improve configuration field descriptions
1.0.10 2022-06-09 13658 Correct logic to sync stream larger than page size
1.0.9 2022-05-06 12685 Update CDK to v0.1.56 to emit an AirbyeTraceMessage on uncaught exceptions
1.0.8 2022-05-04 12576 Decode responses as utf-8 and fallback to ISO-8859-1 if needed
1.0.7 2022-05-03 12552 Decode responses as ISO-8859-1 instead of utf-8
1.0.6 2022-04-27 12335 Adding fixtures to mock time.sleep for connectors that explicitly sleep
1.0.5 2022-04-25 12304 Add Describe stream
1.0.4 2022-04-20 12230 Update connector to use a spec.yaml
1.0.3 2022-04-04 11692 Optimised memory usage for BULK API calls
1.0.2 2022-03-01 10751 Fix broken link anchor in connector configuration
1.0.1 2022-02-27 10679 Reorganize input parameter order on the UI
1.0.0 2022-02-27 10516 Speed up schema discovery by using parallelism
0.1.23 2022-02-10 10141 Processing of failed jobs
0.1.22 2022-02-02 10012 Increase CSV field_size_limit
0.1.21 2022-01-28 9499 If a sync reaches daily rate limit it ends the sync early with success status. Read more in Performance considerations section
0.1.20 2022-01-26 9757 Parse CSV with "unix" dialect
0.1.19 2022-01-25 8617 Update connector fields title/description
0.1.18 2022-01-20 9478 Add available stream filtering by queryable flag
0.1.17 2022-01-19 9302 Deprecate API Type parameter
0.1.16 2022-01-18 9151 Fix pagination in REST API streams
0.1.15 2022-01-11 9409 Correcting the presence of an extra else handler in the error handling
0.1.14 2022-01-11 9386 Handling 400 error, while sobject doesn't support query or queryAll requests
0.1.13 2022-01-11 8797 Switched from authSpecification to advanced_auth in specefication
0.1.12 2021-12-23 8871 Fix examples for new field in specification
0.1.11 2021-12-23 8871 Add the ability to filter streams by user
0.1.10 2021-12-23 9005 Handling 400 error when a stream is not queryable
0.1.9 2021-12-07 8405 Filter 'null' byte(s) in HTTP responses
0.1.8 2021-11-30 8191 Make start_date optional and change its format to YYYY-MM-DD
0.1.7 2021-11-24 8206 Handling 400 error when trying to create a job for sync using Bulk API.
0.1.6 2021-11-16 8009 Fix retring of BULK jobs
0.1.5 2021-11-15 7885 Add Transform for output records
0.1.4 2021-11-09 7778 Fix types for anyType fields
0.1.3 2021-11-06 7592 Fix getting anyType fields using BULK API
0.1.2 2021-09-30 6438 Annotate Oauth2 flow initialization parameters in connector specification
0.1.1 2021-09-21 6209 Fix bug with pagination for BULK API
0.1.0 2021-09-08 5619 Salesforce Aitbyte-Native Connector