Skip to content

Latest commit

 

History

History
815 lines (683 loc) · 41.2 KB

PROTOCOL.md

File metadata and controls

815 lines (683 loc) · 41.2 KB
Raw

Delta Transaction Log Protocol

THIS IS AN IN-PROGRESS DRAFT

Overview

This document is a specification for the Delta Transaction Protocol, which brings ACID properties to large collections of data, stored as files, in a distributed file system or object store. The protocol was designed with the following goals in mind:

  • Serializable ACID Writes - multiple writers can concurrently modify a Delta table while maintaining ACID semantics.
  • Snapshot Isolation for Reads - readers can read a consistent snapshot of a Delta table, even in the face of concurrent writes.
  • Scalability to billions of partitions or files - queries against a Delta table can be planned on a single machine or in parallel.
  • Self describing - all metadata for a Delta table is stored alongside the data. This design eliminates the need to maintain a separate metastore just to read the data and also allows static tables to be copied or moved using standard filesystem tools.
  • Support for incremental processing - readers can tail the Delta log to determine what data has been added in a given period of time, allowing for efficient streaming.

Delta's transactions are implemented using multi-version concurrency control (MVCC). As a table changes, Delta's MVCC algorithm keeps multiple copies of the data around rather than immediately replacing files that contain records that are being updated or removed.

Readers of the table ensure that they only see one consistent snapshot of a table at time by using the transaction log to selectively choose which data files to process.

Writers modify the table in two phases: First, they optimistically write out new data files or updated copies of existing ones. Then, they commit, creating the latest atomic version of the table by adding a new entry to the log. In this log entry they record which data files to logically add and remove, along with changes to other metadata about the table.

Data files that are no longer present in the latest version of the table can be lazily deleted by the vacuum command after a user-specified retention period (default 7 days).

Delta Table Specification

A table has a single serial history of atomic versions, which are named using contiguous, monotonically-increasing integers. The state of a table at a given version is called a snapshot and is defined by the following properties:

  • Version of the Delta log protocol that is required to correctly read or write the table
  • Metadata of the table (e.g., the schema, a unique identifier, partition columns, and other configuration properties)
  • Set of files present in the table, along with metadata about those files
  • Set of tombstones for files that were recently deleted
  • Set of applications-specific transactions that have been successfully committed to the table

File Types

A Delta table is stored within a directory and is composed of four different types of files.

Here is an example of a Delta table with three entries in the commit log, stored in the directory mytable.

/mytable/_delta_log/00000000000000000000.json
/mytable/_delta_log/00000000000000000001.json
/mytable/_delta_log/00000000000000000003.json
/mytable/_delta_log/00000000000000000003.checkpoint.parquet
/mytable/_delta_log/_last_checkpoint
/mytable/part-00000-3935a07c-416b-4344-ad97-2a38342ee2fc.c000.snappy.parquet

Data Files

Data files can be stored in the root directory of the table or in any non-hidden subdirectory (i.e., one whose name does not start with an _). By default, the reference implementation stores data files in directories that are named based on the partition values for data in that file (i.e. part1=value1/part2=value2/...). This directory format is only used to follow existing conventions and is not required by the protocol. Actual partition values for a file must be read from the transaction log.

Delta Log Entries

Delta files are stored as JSON in a directory at the root of the table named _delta_log, and together make up the log of all changes that have occurred to a table. Delta files are the unit of atomicity for a table, and are named using the next available version number, zero-padded to 20 digits.

For example:

./_delta_log/00000000000000000000.json

Delta files use new-line delimited JSON format, where every action is stored as a single line JSON document. A delta file, n.json, contains an atomic set of actions that should be applied to the previous table state, n-1.json, in order to the construct nth snapshot of the table. An action changes one aspect of the table's state, for example, adding or removing a file.

Checkpoints

Checkpoints are also stored in the _delta_log directory, and can be created for any version of the table.

A checkpoint contains the complete replay of all actions up until this version, with invalid actions removed. Invalid actions are those that have been canceled out by a subsequent ones (for example removing a file that has been added), using the rules for reconciliation Checkpoints allow readers to short-cut the cost of reading the log up-to a given point in order to reconstruct a snapshot.

By default, the reference implementation creates a checkpoint every 10 commits.

The checkpoint file name is based on the version of the table that the checkpoint contains. The format of the checkpoint file name can take one of two forms:

  1. A single checkpoint file for version n of the table will be named n.checkpoint.parquet. For example:
00000000000000000010.checkpoint.parquet
  1. A multi-part checkpoint for version n can be fragmented into p files. Fragment o of p is named n.checkpoint.o.p.parquet. For example:
00000000000000000010.checkpoint.0000000001.0000000003.parquet
00000000000000000010.checkpoint.0000000002.0000000003.parquet
00000000000000000010.checkpoint.0000000003.0000000003.parquet

Since it is possible that a writer will fail while writing out one or more parts of a multi-part checkpoint, readers must only use a complete checkpoint, wherein all fragments are present. For performance reasons, readers should search for the most recent earlier checkpoint that is complete.

Checkpoints for a given version must only be created after the associated delta file has been successfully written.

Last Checkpoint File

The Delta transaction log will often contain many (e.g. 10,000+) files. Listing such a large directory can be prohibitively expensive. The last checkpoint file can help reduce the cost of constructing the latest snapshot of the table by providing a pointer to near the end of the log.

Rather than list the entire directory, readers can locate a recent checkpoint by looking at the _delta_log/_last_checkpoint file. Due to the zero-padded encoding of the files in the log, the version id of this recent checkpoint can be used on storage systems that support lexicographically-sorted, paginated directory listing to enumerate any delta files or newer checkpoints that comprise more recent versions of the table.

This last checkpoint file is encoded as JSON and contains the following information:

Field Description
version the version of the table when the last checkpoint was made.
size The number of actions that are stored in the checkpoint.
parts The number of fragments if the last checkpoint was written in multiple parts.

Actions

Actions modify the state of the table and they are stored both in delta files and in checkpoints. This section lists the space of available actions as well as their schema.

Change Metadata

The metaData action changes the current metadata of the table. The first version of a table must contain a metaData action. Subsequent metaData actions completely overwrite the current metadata of the table.

There can be at most one metadata action in a given version of the table.

The schema of the metaData action is as follows:

Field Name Data Type Description
id GUID Unique identifier for this table
name String User-provided identifier for this table
description String User-provided description for this table
format Format Struct Specification of the encoding for the files stored in the table
schemaString Schema Struct Schema of the table
partitionColumns Array[String] An array containing the names of columns by which the data should be partitioned
createdTime Option[Long] The time when this metadata action is created, in milliseconds since the Unix epoch
configuration Map[String, String] A map containing configuration options for the metadata action

Format Specification

Field Name Data Type Description
provider String Name of the encoding for files in this table
options Map[String, String] A map containing configuration options for the format

In the reference implementation, the provider field is used to instantiate a Spark SQL FileFormat. As of Spark 2.4.3 there is built-in FileFormat support for parquet, csv, orc, json, and text.

As of Delta Lake 0.3.0, user-facing APIs only allow the creation of tables where format = 'parquet' and options = {}. Support for reading other formats is present both for legacy reasons and to enable possible support for other formats in the future (See #87).

The following is an example metaData action:

{
  "metaData":{
    "id":"af23c9d7-fff1-4a5a-a2c8-55c59bd782aa",
    "format":{"provider":"parquet","options":{}},
    "schemaString":"...",
    "partitionColumns":[],
    "configuration":{
      "appendOnly": "true"
    }
  }
}

Add File and Remove File

The add and remove actions are used to modify the data in a table by adding or removing individual data files respectively.

The path of a file acts as the primary key for the entry in the set of files. When an add action is encountered for a path that is already present in the table, statistics and other information from the latest version should replace that from any previous version. As such, additional statistics can be added for a path already present in the table by adding it again.

The remove action includes a timestamp that indicates when the removal occurred. Physical deletion of the file can happen lazily after some user-specified expiration time threshold. This delay allows concurrent readers to continue to execute against a stale snapshot of the data. A remove action should remain in the state of the table as a tombstone until it has expired. A tombstone expires when the creation timestamp of the delta file exceeds the expiration threshold added to the remove action timestamp.

Since actions within a given Delta file are not guaranteed to be applied in order, it is not valid for multiple file operations with the same path to exist in a single version.

The dataChange flag on either an add or a remove can be set to false to indicate that an action when combined with other actions in the same atomic version only rearranges existing data or adds new statistics. For example, streaming queries that are tailing the transaction log can use this flag to skip actions that would not affect the final results.

The schema of the add action is as follows:

Field Name Data Type Description
path String A relative path to a file from the root of the table or an absolute path to a file that should be added to the table. The path is a URI as specified by RFC 2396 URI Generic Syntax, which needs to be decoded to get the file path.
partitionValues Map[String, String] A map from partition column to value for this file. See also Partition Value Serialization
size Long The size of this file in bytes
modificationTime Long The time this file was created, as milliseconds since the epoch
dataChange Boolean When false the file must already be present in the table or the records in the added file must be contained in one or more remove actions in the same version
stats Statistics Struct Contains statistics (e.g., count, min/max values for columns) about the data in this file
tags Map[String, String] Map containing metadata about this file

The following is an example add action:

{
  "add": {
    "path":"date=2017-12-10/part-000...c000.gz.parquet",
    "partitionValues":{"date":"2017-12-10"},
    "size":841454,
    "modificationTime":1512909768000,
    "dataChange":true
    "stats":"{\"numRecords\":1,\"minValues\":{\"val..."
  }
}

The schema of the remove action is as follows:

Field Name Data Type Description
path String A relative path to a file from the root of the table or an absolute path to a file that should be removed from the table. The path is a URI as specified by RFC 2396 URI Generic Syntax, which needs to be decoded to get the file path.
deletionTimestamp Option[Long] The time the deletion occurred, represented as milliseconds since the epoch
dataChange Boolean When false the records in the removed file must be contained in one or more add file actions in the same version
extendedFileMetadata Boolean When true the fields partitionValues, size, and tags are present
partitionValues Map[String, String] A map from partition column to value for this file. See also Partition Value Serialization
size Long The size of this file in bytes
tags Map[String, String] Map containing metadata about this file

The following is an example remove action.

{
  "remove":{
    "path":"part-00001-9…..snappy.parquet",
    "deletionTimestamp":1515488792485,
    "dataChange":true
  }
}

Transaction Identifiers

Incremental processing systems (e.g., streaming systems) that track progress using their own application-specific versions need to record what progress has been made, in order to avoid duplicating data in the face of failures and retries during a write. Transaction identifiers allow this information to be recorded atomically in the transaction log of a delta table along with the other actions that modify the contents of the table.

Transaction identifiers are stored in the form of appId version pairs, where appId is a unique identifier for the process that is modifying the table and version is an indication of how much progress has been made by that application. The atomic recording of this information along with modifications to the table enables these external system can make their writes into a Delta table idempotent.

For example, the Delta Sink for Apache Spark's Structured Streaming ensures exactly-once semantics when writing a stream into a table using the following process:

  1. Record in a write-ahead-log the data that will be written, along with a monotonically increasing identifier for this batch.
  2. Check the current version of the transaction with appId = streamId in the target table. If this value is greater than or equal to the batch being written, then this data has already been added to the table and processing can skip to the next batch.
  3. Write the data optimistically into the table.
  4. Attempt to commit the transaction containing both the addition of the data written out and an updated appId version pair.

The semantics of the application-specific version are left up to the external system. Delta only ensures that the latest version for a given appId is available in the table snapshot. The Delta transaction protocol does not, for example, assume monotonicity of the version and it would be valid for the version to decrease, possibly representing a "rollback" of an earlier transaction.

The schema of the txn action is as follows:

Field Name Data Type Description
appId String A unique identifier for the application performing the transaction
version Long An application-specific numeric identifier for this transaction
lastUpdated Option[Long] The time when this transaction action is created, in milliseconds since the Unix epoch

The following is an example txn action:

{
  "txn": {
    "appId":"3ba13872-2d47-4e17-86a0-21afd2a22395",
    "version":364475
  }
}

Protocol Evolution

The protocol action is used to increase the version of the Delta protocol that is required to read or write a given table. Protocol versioning allows a newer client to exclude older readers and/or writers that are missing features required to correctly interpret the transaction log. The protocol version will be increased whenever non-forward-compatible changes are made to this specification. In the case where a client is running an invalid protocol version, an error should be thrown instructing the user to upgrade to a newer protocol version of their Delta client library.

Since breaking changes must be accompanied by an increase in the protocol version recorded in a table, clients can assume that unrecognized fields or actions are never required in order to correctly interpret the transaction log.

The schema of the protocol action is as follows:

Field Name Data Type Description
minReaderVersion Int The minimum version of the Delta read protocol that a client must implement in order to correctly read this table
minWriterVersion Int The minimum version of the Delta write protocol that a client must implement in order to correctly write this table

The current version of the Delta protocol is:

{
  "protocol":{
    "minReaderVersion":1,
    "minWriterVersion":2
  }
}

Commit Provenance Information

A delta file can optionally contain additional provenance information about what higher-level operation was being performed as well as who executed it.

Implementations are free to store any valid JSON-formatted data via the commitInfo action.

An example of storing provenance information related to an INSERT operation:

{
  "commitInfo":{
    "timestamp":1515491537026,
    "userId":"100121",
    "userName":"[email protected]",
    "operation":"INSERT",
    "operationParameters":{"mode":"Append","partitionBy":"[]"},
    "notebook":{
      "notebookId":"4443029",
      "notebookPath":"Users/[email protected]/actions"},
      "clusterId":"1027-202406-pooh991"
  }  
}

Action Reconciliation

A given snapshot of the table can be computed by replaying the events committed to the table in ascending order by commit version. A given snapshot of a Delta table consists of:

  • A single protocol action
  • A single metaData action
  • A map from appId to transaction version
  • A collection of add actions with unique paths
  • A collection of remove actions with unique paths. The intersection of the paths in the add collection and remove collection must be empty. That means a file cannot exist in both the remove and add collections. The remove actions act as tombstones.

To achieve the requirements above, related actions from different delta files need to be reconciled with each other:

  • The latest protocol action seen wins
  • The latest metaData action seen wins
  • For transaction identifiers, the latest version seen for a given appId wins
  • All add actions for different paths need to be accumulated as a list. The latest add action (from a more recent delta file) observed for a given path wins.
  • All remove actions for different paths need to be accumulated as a list. If a remove action is received later (from a more recent delta file) for the same path as an add operation, the corresponding add action should be removed from the add collection and the file needs to be tracked as part of the remove collection.
  • If an add action is received later (from a more recent delta file) for the same path as a remove operation, the corresponding remove action should be removed from the remove collection and the file needs to be tracked as part of the add collection.

Column Mapping

Delta can use column mapping to avoid any column naming restrictions, and to support the renaming and dropping of columns without having to rewrite all the data. There are two modes of column mapping, by name and by id. In both modes, every column - nested or leaf - is assigned a unique physical name, and a unique 32 bit integer as an id. The physical name is stored as part of the column metadata with the key delta.columnMapping.physicalName. The column id is stored within the metadata with the key delta.columnMapping.id. The column mapping is governed by the table property delta.columnMapping.mode and can be one of none, id, and name.

The following is an example for the column definition of a table that leverages column mapping. See the appendix for a more complete schema definition.

{
    "name" : "e",
    "type" : {
      "type" : "array",
      "elementType" : {
        "type" : "struct",
        "fields" : [ {
          "name" : "d",
          "type" : "integer",
          "nullable" : false,
          "metadata" : { 
            "delta.columnMapping.id": 5,
            "delta.columnMapping.physicalName": "col-a7f4159c-53be-4cb0-b81a-f7e5240cfc49"
          }
        } ]
      },
      "containsNull" : true
    },
    "nullable" : true,
    "metadata" : { 
      "delta.columnMapping.id": 4,
      "delta.columnMapping.physicalName": "col-5f422f40-de70-45b2-88ab-1d5c90e94db1"
    }
  }

Writer Requirements for Column Mapping

In order to support column mapping, writers must:

  • Write data files by using the physical name that is chosen for each column. The physical name of the column is static and can be different than the display name of the column, which is changeable.
  • Write the 32 bit integer column identifier as part of the field_id field of the SchemaElement struct in the Parquet Thrift specification.
  • Track partition values and column level statistics with the physical name of the column in the transaction log.
  • Assign a globally unique identifier as the physical name for each new column that is added to the schema. This is especially important for supporting cheap column deletions in name mode. In addition, column identifiers need to be assigned to each column. The maximum id that is assigned to a column is tracked as the table property delta.columnMapping.maxColumnId. This is an internal table property that cannot be configured by users. This value must increase monotonically as new columns are introduced and committed to the table alongside the introduction of the new columns to the schema.

Reader Requirements for Column Mapping

In none mode, readers must read the parquet files by using the display names (the name field of the column definition) of the columns in the schema.

In id mode, readers must resolve columns by using the field_id in the parquet metadata for each file. Partition values and column level statistics must be resolved by their physical names for each add entry in the transaction log. If a data file does not contain field ids, readers must refuse to read that file or return nulls for each column. For ids that cannot be found in a file, readers must return null values for those columns.

In name mode, readers must resolve columns in the data files by their physical names. Partition values and column level statistics will also be resolved by their physical names. For columns that are not found in the files, nulls need to be returned. Column ids are not used in this mode for resolution purposes.

Requirements for Writers

This section documents additional requirements that writers must follow in order to preserve some of the higher level guarantees that Delta provides.

Creation of New Log Entries

  • Writers MUST never overwrite an existing log entry. When ever possible they should use atomic primitives of the underlying filesystem to ensure concurrent writers do not overwrite each others entries.

Consistency Between Table Metadata and Data Files

  • Any column that exists in a data file present in the table MUST also be present in the metadata of the table.
  • Values for all partition columns present in the schema MUST be present for all files in the table.
  • Columns present in the schema of the table MAY be missing from data files. Readers SHOULD fill these missing columns in with null.

Delta Log Entries

  • A single log entry MUST NOT include more than one action that reconciles with each other.
    • Add / Remove actions with the same path
    • More than one Metadata action
    • More than one protocol action
    • More than one SetTransaction with the same appId

Checkpoints

  • A checkpoint MUST only be written after the corresponding log entry has been completely written.
  • When writing multi-part checkpoints, the data must be clustered (either through hash or range partitioning) by the 'path' of an added or removed file, or null otherwise. This ensures deterministic content in each part file in case of multiple attempts to write the files.

Checkpoint Format

Checkpoint files must be written in Apache Parquet format. Each row in the checkpoint corresponds to a single action. The checkpoint must contain all information regarding the following actions:

Commit provenance information does not need to be included in the checkpoint. All of these actions are stored as their individual columns in parquet as struct fields.

Within the checkpoint, the add struct may or may not contain the following columns based on the configuration of the table:

  • partitionValues_parsed: In this struct, the column names correspond to the partition columns and the values are stored in their corresponding data type. This is a required field when the table is partitioned and the table property delta.checkpoint.writeStatsAsStruct is set to true. If the table is not partitioned, this column can be omitted. For example, for partition columns year, month and event with data types int, int and string respectively, the schema for this field will look like:
|-- add: struct
|    |-- partitionValues_parsed: struct
|    |    |-- year: int
|    |    |-- month: int
|    |    |-- event: string
  • stats: Column level statistics can be stored as a JSON string in the checkpoint. This field needs to be written when statistics are available and the table property: delta.checkpoint.writeStatsAsJson is set to true (which is the default). When this property is set to false, this field should be omitted from the checkpoint.
  • stats_parsed: The stats can be stored in their [original format](#Per-file Statistics). This field needs to be written when statistics are available and the table property: delta.checkpoint.writeStatsAsStruct is set to true. When this property is set to false (which is the default), this field should be omitted from the checkpoint.

Refer to the appendix for an example on the schema of the checkpoint.

Data Files

  • Data files MUST be uniquely named and MUST NOT be overwritten. The reference implementation uses a GUID in the name to ensure this property.

Append-only Tables

When the table property delta.appendOnly is set to true:

  • New log entries MUST NOT change or remove data from the table.
  • New log entries may rearrange data (i.e. add and remove actions where dataChange=false).

Column Invariants

  • The metadata for a column in the table schema MAY contain the key delta.invariants.
  • The value of delta.invariants SHOULD be parsed as a boolean SQL expression.
  • Writers MUST abort any transaction that adds a row to the table, where an invariant evaluates to false or null.

Generated Columns

  • The metadata for a column in the table schema MAY contain the key delta.generationExpression.
  • The value of delta.generationExpression SHOULD be parsed as a SQL expression.
  • Writers MUST enforce that any data writing to the table satisfy the condition (<value> <=> <generation expression>) IS TRUE. <=> is the NULL-safe equal operator which performs an equality comparison like the = operator but returns TRUE rather than NULL if both operands are NULL

Writer Version Requirements

The requirements of the writers according to the protocol versions are summarized in the table below. Each row inherits the requirements from the preceding row.


 Requirements
Writer Version 2 - Support delta.appendOnly
- Support Column Invariants
Writer Version 3 Enforce:
- delta.checkpoint.writeStatsAsJson
- delta.checkpoint.writeStatsAsStruct
- CHECK constraints
Writer Version 4 - Support Change Data Feed
- Support Generated Columns
Writer Version 5 Respect Column Mapping

Requirements for Readers

The requirements of the readers according to the protocol versions are summarized in the table below. Each row inherits the requirements from the preceding row.


 Requirements
Reader Version 2 Respect Column Mapping

Appendix

Per-file Statistics

add actions can optionally contain statistics about the data in the file being added to the table. These statistics can be used for eliminating files based on query predicates or as inputs to query optimization.

Global statistics record information about the entire file. The following global statistic is currently supported:

Name Description
numRecords The number of records in this file.

Per-column statistics record information for each column in the file and they are encoded, mirroring the schema of the actual data. For example, given the following data schema:

|-- a: struct
|    |-- b: struct
|    |    |-- c: long

Statistics could be stored with the following schema:

|-- stats: struct
|    |-- numRecords: long
|    |-- minValues: struct
|    |    |-- a: struct
|    |    |    |-- b: struct
|    |    |    |    |-- c: long
|    |-- maxValues: struct
|    |    |-- a: struct
|    |    |    |-- b: struct
|    |    |    |    |-- c: long

The following per-column statistics are currently supported:

Name Description
nullCount The number of null values for this column
minValues A value smaller than all values present in the file for this column
maxValues A value larger than all values present in the file for this column

Partition Value Serialization

Partition values are stored as strings, using the following formats. An empty string for any type translates to a null partition value.

Type Serialization Format
string No translation required
numeric types The string representation of the number
date Encoded as {year}-{month}-{day}. For example, 1970-01-01
timestamp Encoded as {year}-{month}-{day} {hour}:{minute}:{second} For example: 1970-01-01 00:00:00
boolean Encoded as the string "true" or "false"
binary Encoded as a string of escaped binary values. For example, "\u0001\u0002\u0003"

Schema Serialization Format

Delta uses a subset of Spark SQL's JSON Schema representation to record the schema of a table in the transaction log. A reference implementation can be found in the catalyst package of the Apache Spark repository.

Primitive Types

Type Name Description
string UTF-8 encoded string of characters
long 8-byte signed integer. Range: -9223372036854775808 to 9223372036854775807
integer 4-byte signed integer. Range: -2147483648 to 2147483647
short 2-byte signed integer numbers. Range: -32768 to 32767
byte 1-byte signed integer number. Range: -128 to 127
float 4-byte single-precision floating-point numbers
double 8-byte double-precision floating-point numbers
decimal signed decimal number with fixed precision (maximum number of digits) and scale (number of digits on right side of dot). The precision and scale can be up to 38.
boolean true or false
binary A sequence of binary data.
date A calendar date, represented as a year-month-day triple without a timezone.
timestamp Microsecond precision timestamp without a timezone.

Struct Type

A struct is used to represent both the top-level schema of the table as well as struct columns that contain nested columns. A struct is encoded as a JSON object with the following fields:

Field Name Description
type Always the string "struct"
fields An array of fields

Struct Field

A struct field represents a top-level or nested column.

Field Name Description
name Name of this (possibly nested) column
type String containing the name of a primitive type, a struct definition, an array definition or a map definition
nullable Boolean denoting whether this field can be null
metadata A JSON map containing information about this column. Keys prefixed with Delta are reserved for the implementation. See TODO for more information on column level metadata that clients must handle when writing to a table.

Array Type

An array stores a variable length collection of items of some type.

Field Name Description
type Always the string "array"
elementType The type of element stored in this array represented as a string containing the name of a primitive type, a struct definition, an array definition or a map definition
containsNull Boolean denoting whether this array can contain one or more null values

Map Type

A map stores an arbitrary length collection of key-value pairs with a single keyType and a single valueType.

Field Name Description
type Always the string "map".
keyType The type of element used for the key of this map, represented as a string containing the name of a primitive type, a struct definition, an array definition or a map definition
valueType The type of element used for the key of this map, represented as a string containing the name of a primitive type, a struct definition, an array definition or a map definition

Example

Example Table Schema:

|-- a: integer (nullable = false)
|-- b: struct (nullable = true)
|    |-- d: integer (nullable = false)
|-- c: array (nullable = true)
|    |-- element: integer (containsNull = false)
|-- e: array (nullable = true)
|    |-- element: struct (containsNull = true)
|    |    |-- d: integer (nullable = false)
|-- f: map (nullable = true)
|    |-- key: string
|    |-- value: string (valueContainsNull = true)

JSON Encoded Table Schema:

{
  "type" : "struct",
  "fields" : [ {
    "name" : "a",
    "type" : "integer",
    "nullable" : false,
    "metadata" : { }
  }, {
    "name" : "b",
    "type" : {
      "type" : "struct",
      "fields" : [ {
        "name" : "d",
        "type" : "integer",
        "nullable" : false,
        "metadata" : { }
      } ]
    },
    "nullable" : true,
    "metadata" : { }
  }, {
    "name" : "c",
    "type" : {
      "type" : "array",
      "elementType" : "integer",
      "containsNull" : false
    },
    "nullable" : true,
    "metadata" : { }
  }, {
    "name" : "e",
    "type" : {
      "type" : "array",
      "elementType" : {
        "type" : "struct",
        "fields" : [ {
          "name" : "d",
          "type" : "integer",
          "nullable" : false,
          "metadata" : { }
        } ]
      },
      "containsNull" : true
    },
    "nullable" : true,
    "metadata" : { }
  }, {
    "name" : "f",
    "type" : {
      "type" : "map",
      "keyType" : "string",
      "valueType" : "string",
      "valueContainsNull" : true
    },
    "nullable" : true,
    "metadata" : { }
  } ]
}

Checkpoint Schema

For a table with partition columns: "date", "region" of types date and string respectively and data columns: "asset", "quantity" and "is_available" with data types string, double and boolean, the checkpoint schema will look as follows:

|-- metaData: struct
|    |-- id: string
|    |-- name: string
|    |-- description: string
|    |-- format: struct
|    |    |-- provider: string
|    |    |-- options: map<string,string>
|    |-- schemaString: string
|    |-- partitionColumns: array<string>
|    |-- createdTime: long
|    |-- configuration: map<string, string>
|-- protocol: struct
|    |-- minReaderVersion: int
|    |-- minWriterVersion: int
|-- txn: struct
|    |-- appId: string
|    |-- version: long
|-- add: struct
|    |-- path: string
|    |-- partitionValues: map<string,string>
|    |-- size: long
|    |-- modificationTime: long
|    |-- dataChange: boolean
|    |-- stats: string
|    |-- tags: map<string,string>
|    |-- partitionValues_parsed: struct
|    |    |-- date: date
|    |    |-- region: string
|    |-- stats_parsed: struct
|    |    |-- numRecords: long
|    |    |-- minValues: struct
|    |    |    |-- asset: string
|    |    |    |-- quantity: double
|    |    |-- maxValues: struct
|    |    |    |-- asset: string
|    |    |    |-- quantity: double
|    |    |-- nullCounts: struct
|    |    |    |-- asset: long
|    |    |    |-- quantity: long
|-- remove: struct
|    |-- path: string
|    |-- deletionTimestamp: long
|    |-- dataChange: boolean

For a table that uses column mapping, whether in id or name mode, the schema of the add column will look as follows.

Schema definition:

{
  "type" : "struct",
  "fields" : [ {
    "name" : "asset",
    "type" : "string",
    "nullable" : true,
    "metadata" : {
      "delta.columnMapping.id": 1,
      "delta.columnMapping.physicalName": "col-b96921f0-2329-4cb3-8d79-184b2bdab23b"
    }
  }, {
    "name" : "quantity",
    "type" : "double",
    "nullable" : true,
    "metadata" : {
      "delta.columnMapping.id": 2,
      "delta.columnMapping.physicalName": "col-04ee4877-ee53-4cb9-b1fb-1a4eb74b508c"
    }
  }, {
    "name" : "date",
    "type" : "date",
    "nullable" : true,
    "metadata" : {
      "delta.columnMapping.id": 3,
      "delta.columnMapping.physicalName": "col-798f4abc-c63f-444c-9a04-e2cf1ecba115"
    }
  }, {
    "name" : "region",
    "type" : "string",
    "nullable" : true,
    "metadata" : {
      "delta.columnMapping.id": 4,
      "delta.columnMapping.physicalName": "col-19034dc3-8e3d-4156-82fc-8e05533c088e"
    }
  } ]
}

Checkpoint schema (just the add column):

|-- add: struct
|    |-- path: string
|    |-- partitionValues: map<string,string>
|    |-- size: long
|    |-- modificationTime: long
|    |-- dataChange: boolean
|    |-- stats: string
|    |-- tags: map<string,string>
|    |-- partitionValues_parsed: struct
|    |    |-- col-798f4abc-c63f-444c-9a04-e2cf1ecba115: date
|    |    |-- col-19034dc3-8e3d-4156-82fc-8e05533c088e: string
|    |-- stats_parsed: struct
|    |    |-- numRecords: long
|    |    |-- minValues: struct
|    |    |    |-- col-b96921f0-2329-4cb3-8d79-184b2bdab23b: string
|    |    |    |-- col-04ee4877-ee53-4cb9-b1fb-1a4eb74b508c: double
|    |    |-- maxValues: struct
|    |    |    |-- col-b96921f0-2329-4cb3-8d79-184b2bdab23b: string
|    |    |    |-- col-04ee4877-ee53-4cb9-b1fb-1a4eb74b508c: double
|    |    |-- nullCounts: struct
|    |    |    |-- col-b96921f0-2329-4cb3-8d79-184b2bdab23b: long
|    |    |    |-- col-04ee4877-ee53-4cb9-b1fb-1a4eb74b508c: long