diff --git a/CC2530DB/settings/GenericApp.dnx b/CC2530DB/settings/GenericApp.dnx
index 4a35b6b..f700fa3 100644
--- a/CC2530DB/settings/GenericApp.dnx
+++ b/CC2530DB/settings/GenericApp.dnx
@@ -76,15 +76,6 @@
         <Freq>50000000</Freq>
         <FreqHi>0</FreqHi>
     </Simulator>
-    <Breakpoints>
-        <Bp0>_ "STD_CODE" "{C:\Z-Stack 3.0.2\Components\stack\bdb\bdb_Reporting.c}.2241.7" 1 0 0 0 "" 0 ""</Bp0>
-        <Bp1>_ "STD_CODE" "{C:\Z-Stack 3.0.2\Components\stack\bdb\bdb_Reporting.c}.2258.3" 1 0 0 0 "" 0 ""</Bp1>
-        <Count>2</Count>
-    </Breakpoints>
-    <ChipconEmu>
-        <StopTimersOnHalt>0</StopTimersOnHalt>
-        <LeaveTargetRunning>1</LeaveTargetRunning>
-    </ChipconEmu>
     <LogFile>
         <LoggingEnabled>_ 0</LoggingEnabled>
         <LogFile>_ ""</LogFile>
@@ -94,6 +85,15 @@
         <LoggingEnabled>_ 0</LoggingEnabled>
         <LogFile>_ ""</LogFile>
     </TermIOLog>
+    <Breakpoints>
+        <Bp0>_ "STD_CODE" "{C:\Z-Stack 3.0.2\Components\stack\bdb\bdb_Reporting.c}.2241.6" 1 0 0 0 "" 0 ""</Bp0>
+        <Bp1>_ "STD_CODE" "{C:\Z-Stack 3.0.2\Components\stack\bdb\bdb_Reporting.c}.2258.3" 1 0 0 0 "" 0 ""</Bp1>
+        <Count>2</Count>
+    </Breakpoints>
+    <ChipconEmu>
+        <StopTimersOnHalt>0</StopTimersOnHalt>
+        <LeaveTargetRunning>1</LeaveTargetRunning>
+    </ChipconEmu>
     <Aliases>
         <Count>0</Count>
         <SuppressDialog>0</SuppressDialog>
diff --git a/README.md b/README.md
index c6ec339..0813803 100644
--- a/README.md
+++ b/README.md
@@ -8,15 +8,11 @@
 
 
 # How to join:
-### If device in FN(factory new) state:
-1. Press and hold button (1) for 2-3 seconds, until device start flashing led
+
+1. Press and hold button (1) for 3-100 seconds(depends whter or not device is on a network), until device start flashing led
 2. Wait, in case of successfull join, device will flash led 5 times
 3. If join failed, device will flash led 3 times
 
-### If device in a network:
-1. Hold button (1) for 10 seconds, this will reset device to FN(factory new) status
-2. Go to step 1 for FN device
-
 # How to use touch link
 1. Bring you remote near to TL device
 2. Hold button (2) for 5 seconds
diff --git a/Source/zcl_freepadapp.c b/Source/zcl_freepadapp.c
index 0064273..2204740 100644
--- a/Source/zcl_freepadapp.c
+++ b/Source/zcl_freepadapp.c
@@ -152,7 +152,13 @@ void zclFreePadApp_Init(byte task_id) {
     bdb_RegisterCommissioningStatusCB(zclFreePadApp_ProcessCommissioningStatus);
     touchLinkInitiator_RegisterNotifyTLCB(zclFreePadApp_TL_NotifyCb);
 
-    bdb_StartCommissioning(BDB_COMMISSIONING_REJOIN_EXISTING_NETWORK_ON_STARTUP);
+    if (zgReadStartupOptions() & ZCD_STARTOPT_DEFAULT_NETWORK_STATE) {
+        LREPMaster("BDB_COMMISSIONING_MODE_NWK_STEERING\r\n");
+        bdb_StartCommissioning(BDB_COMMISSIONING_MODE_NWK_STEERING);
+    } else {
+        LREPMaster("BDB_COMMISSIONING_REJOIN_EXISTING_NETWORK_ON_STARTUP\r\n");
+        bdb_StartCommissioning(BDB_COMMISSIONING_REJOIN_EXISTING_NETWORK_ON_STARTUP);
+    }
 
     LREP("Started build %s \r\n", zclFreePadApp_DateCodeNT);
     osal_start_reload_timer(zclFreePadApp_TaskID, FREEPADAPP_REPORT_EVT, FREEPADAPP_REPORT_DELAY);
@@ -407,13 +413,7 @@ uint16 zclFreePadApp_event_loop(uint8 task_id, uint16 events) {
 static void zclFreePadApp_Rejoin(void) {
     LREPMaster("Recieved rejoin command\r\n");
     HalLedSet(HAL_LED_1, HAL_LED_MODE_FLASH);
-    if (bdbAttributes.bdbNodeIsOnANetwork) {
-        LREPMaster("Reset to FN\r\n");
-        bdb_resetLocalAction();
-    } else {
-        LREPMaster("StartCommissioning STEEREING\r\n");
-        bdb_StartCommissioning(BDB_COMMISSIONING_MODE_NWK_STEERING);
-    }
+    bdb_resetLocalAction();
 }
 
 static void zclFreePadApp_SendButtonPress(uint8 endPoint, uint8 clicksCount) {