(If you're reading this on GitHub, the formatting's a bit messed up. Try the version on cowlark.com instead.)
Breaking news! As of 2024-10-01, the FluxEngine client software works (to a point) with Applesauce hardware.
The FluxEngine is a very cheap USB floppy disk interface capable of reading and writing exotic non-PC floppy disk formats. It allows you to use a conventional PC drive to accept Amiga disks, CLV Macintosh disks, bizarre 128-sector CP/M disks, and other weird and bizarre formats. (Although not all of these are supported yet. I could really use samples.)
The hardware consists of a single, commodity part with a floppy drive connector soldered onto it. No ordering custom boards, no fiddly surface mount assembly, and no fuss: nineteen simpler solder joints and you're done. You can make one for $15 (plus shipping).
Don't believe me? Watch the demo reel!
New! The FluxEngine client software now works with Greaseweazle and Applesauce hardware. So, if you can't find a PSoC5 development kit, or don't want to use the Cypress Windows tools for programming it, you can use one of these instead. Very nearly all FluxEngine features are available with the Greaseweazle and it works out-of-the box; the Applesauce is a bit less supported but still works. See the dedicated Greaseweazle documentation page or the Applesauce page for more information.
This page was getting kinda unwieldy so I've broken it up. Please consult the following friendly articles:
-
Frequently asked questions ∾ but why...? ∾ does it...? ∾ can it...?
-
How the FluxEngine works ∾ nitty gritty of the sampler/sequencer hardware ∾ useful links on floppy drives ∾ why I'm not using an Arduino/STM32/ESP32/Raspberry Pi
-
Making a FluxEngine ∾ what parts you need ∾ building it ∾ setting up the toolchain ∾ compiling the firmware ∾ programming the board
-
Using a FluxEngine ∾ what to do with your new hardware ∾ flux files and image files ∾ knowing what you're doing
-
Using Greaseweazle hardware with the FluxEngine client software ∾ what works ∾ what doesn't work ∾ where to go for help
-
Configuring for your drive ∾ but I don't have a 80 track drive! ∾ reading and writing 40 track disks ∾ Shugart and Apple II
-
Direct filesystem access ∾ imaging files is a pain ∾ accessing files directly ∾ features and limitation ∾ it works on disk images too, you say?
-
Troubleshooting dubious disks ∾ it's not an exact science ∾ the sector map ∾ clock detection and the histogram
-
Disk densities ∾ what's the difference between an HD and DD disk? ∾ you can't do that with that ∾ measuring your drive's ability to work with exotic formats ∾ I think my drive is broken
The current support state is as follows.
Dinosaurs (🦖) have yet to be observed in real life --- I've written the encoder and/or decoder based on Kryoflux (or other) dumps I've found. I don't (yet) have real, physical disks in my hand to test the capture process, or hardware to verify that written disks work.
Unicorns (🦄) are completely real --- this means that I've read actual, physical disks with these formats and/or written real, physical disks and then used them on real hardware, and so know they work (or had reports from people who've had it work).
If a filesystem is listed, this means that FluxEngine natively supports that particular filesystem and can read (and sometimes write, support varies) files directly from disks, flux files or disk images. Some formats have multiple choices because they can store multiple types of file system.
| Profile | Format | Read? | Write? | Filesystem? |
|---|---|---|---|---|
acornadfs |
Acorn ADFS: BBC Micro, Archimedes | 🦖 | ||
acorndfs |
Acorn DFS: Acorn Atom, BBC Micro series | 🦄 | ACORNDFS | |
aeslanier |
AES Lanier "No Problem": 616kB 5.25" 77-track SSDD hard sectored | 🦖 | ||
agat |
Agat: 840kB 5.25" 80-track DS | 🦖 | 🦖 | |
amiga |
Amiga: 880kB 3.5" DSDD | 🦄 | 🦄 | AMIGAFFS |
ampro |
Ampro Little Board: CP/M | 🦖 | CPMFS | |
apple2 |
Apple II: Prodos, Appledos, and CP/M | 🦄 | 🦄 | APPLEDOS CPMFS PRODOS |
atarist |
Atari ST: Almost PC compatible | 🦄 | 🦄 | |
bk |
BK: 800kB 5.25"/3.5" 80-track 10-sector DSDD | 🦖 | 🦖 | |
brother |
Brother word processors: GCR family | 🦄 | 🦄 | BROTHER120 FATFS |
commodore |
Commodore: 1541, 1581, 8050 and variations | 🦄 | 🦄 | CBMFS |
eco1 |
VDS Eco1: CP/M; 1210kB 77-track mixed format DSHD | 🦖 | CPMFS | |
epsonpf10 |
Epson PF-10: CP/M; 3.5" 40-track DSDD | 🦖 | CPMFS | |
f85 |
Durango F85: 461kB 5.25" 77-track SS | 🦖 | ||
fb100 |
Brother FB-100: 100kB 3.5" 40-track SSSD | 🦖 | ||
hplif |
Hewlett-Packard LIF: a variety of disk formats used by HP | 🦄 | 🦄 | LIF |
ibm |
IBM PC: Generic PC 3.5"/5.25" disks | 🦄 | 🦄 | FATFS |
icl30 |
ICL Model 30: CP/M; 263kB 35-track DSSD | 🦖 | CPMFS | |
mac |
Macintosh: 400kB/800kB 3.5" GCR | 🦄 | 🦄 | MACHFS |
micropolis |
Micropolis: 100tpi MetaFloppy disks | 🦄 | 🦄 | |
ms2000 |
: MS2000 Microdisk Development System | MICRODOS | ||
mx |
DVK MX: Soviet-era PDP-11 clone | 🦖 | ||
n88basic |
N88-BASIC: PC8800/PC98 5.25" 77-track 26-sector DSHD | 🦄 | 🦄 | |
northstar |
Northstar: 5.25" hard sectored | 🦄 | 🦄 | |
psos |
pSOS: 800kB DSDD with PHILE | 🦄 | 🦄 | PHILE |
rolandd20 |
Roland D20: 3.5" electronic synthesiser disks | 🦄 | 🦖 | ROLAND |
rx50 |
Digital RX50: 400kB 5.25" 80-track 10-sector SSDD | 🦖 | 🦖 | |
smaky6 |
Smaky 6: 308kB 5.25" 77-track 16-sector SSDD, hard sectored | 🦖 | SMAKY6 | |
tartu |
Tartu: The Palivere and variations | 🦄 | 🦖 | CPMFS |
tids990 |
Texas Instruments DS990: 1126kB 8" DSSD | 🦖 | 🦖 | |
tiki |
Tiki 100: CP/M | CPMFS | ||
victor9k |
Victor 9000 / Sirius One: 1224kB 5.25" DSDD GCR | 🦖 | 🦖 | |
zilogmcz |
Zilog MCZ: 320kB 8" 77-track SSSD hard-sectored | 🦖 | ZDOS | |
| {: .datatable } |
-
IBM PC disks are the lowest-common-denominator standard. A number of other systems use this format in disguise (the Atari ST, late-era Apple machines, Acorn). FluxEngine supports both FM and MFM disks, although you have to tell it which one. If you have an unknown disk, try this; you may get something. Then tell me about it.
-
Not many formats support writing yet. That's because I need actual, physical hardware to test with in order to verify it works, and I only have a limited selection. (Plus a lot of the write code needs work.) There hasn't been a lot of demand for this yet; if you have a pressing need to write weird disks, please ask. I haven't implemented write support for PC disks because they're boring and I'm lazy, and also because they vary so much that figuring out how to specify them is hard.
If you have samples of weird disks, and want to send them to me --- either FluxEngine, Kryoflux or Catweasel dumps, or (even better) actually physically --- I can identify them and add support.
Please note that at this point I am not interested in copy protected disks. It's not out of principle. It's just they'll drive me insane. FluxEngine will most likely be able to read the data fine, unless they're doing bizarre things like spiral tracks or partially encoded data, but let's stick with normal conventionally formatted disks for the time being!
That said, I need to post a warning.
Floppy disks are old, unreliable, and frequently damaged and/or filthy. I expect you to know what you're doing and be responsible for your own actions. It's entirely possible for a damaged disk, when read, to scrape the magnetic coating off the disk and pack it into the drive's disk head, not only permanently damaging the drive, but also irrecoverably destroying any data on the disk.
If this happens and you complain to me, I will be sympathetic but fundamentally unhelpful. Proceed at your own risk.
Remember: FluxEngine is not a substitute for a real data recovery service. Is your data worth money to you? If so, don't try to read it using an open source project hacked together by some person you've never met on the internet.
Also, remember to clean your disk heads.
The FluxEngine was designed, built and written by me, David Given. You may contact me at [email protected], or visit my website at http://www.cowlark.com. There may or may not be anything interesting there.
Everything here except the contents of the dep directory is © 2022 The
FluxEngine Authors (mostly me, David Given; see the VCS history for the other
people) and is licensed under the MIT open source license. Please see
COPYING for the full text. The tl;dr is: you can do what you like
with it provided you don't claim you wrote it.
As an exception, dep/emu contains parts of the OpenBSD C library
code, maintained by Todd Miller and William A. Rowe (and probably others). It is licensed
under the terms of the 3-clause BSD license. Please see the contents of the
directory for the full text. It's been lightly modified by me.
As an exception, dep/agg contains parts of the Anti-Grain Antialiasing
library, written by Maxim Semanarev (and others). It is licensed under the
terms of the 3-clause BSD license. Please see the contents of the directory for
the full text. It's been lightly modified by me.
As an exception, dep/stb contains parts of the libstb utility library,
written by Sean T Barett (and others). It is public domain/Unlicense/MIT
licensed, at your choice. Please see the contents of the directory for the full
text.
As an exception, dep/snowhouse contains the snowhouse assertion library,
taken from https://github.com/banditcpp/snowhouse. It is Boost Standard License
1.0 licensed. Please see the contents of the directory for the full text. Note
that this is only used during the build and no code ends up in the output
binaries.
As an exception, dep/libusbp contains the libusbp library, taken from
https://github.com/pololu/libusbp. It is MIT licensed. Please see the contents
of the directory for the full text.
As an exception, dep/fatfs contains the fatfs library, taken from
http://elm-chan.org/fsw/ff/00index_e.html. It is single-clause BSD licensed.
Please see the contents of the directory for the full text.
As an exception, dep/adflib contains the adflib library, written by Laurent
Clevy et al, taken from https://github.com/lclevy/ADFlib. It is GPL 2.0
licensed. Please see the contents of the directory for the full text.
As an exception, dep/hfsutils contains a partial copy of the hfsutils
package, written by Robert Leslie et al, taken from
https://www.mars.org/home/rob/proj/hfs. It is GPL 2.0 licensed. Please see the
contents of the directory for the full text.
Important: Because of all these exceptions, if you distribute the FluxEngine package as a whole, you must comply with the terms of all of the licensing terms. This means that effectively the FluxEngine package is distributable under the terms of the GPL 2.0.