Using Advanced Stateful Mode with TRex on Two Physical Machines with Mellanox-6x DX Cards

[Lidhoria]

hi,

1.Is it Possible to in Trex-core using Mellonax card
to Configure Machine A to Generate Traffic from Both Ports and Act as a Client, While Machine B Receives Traffic from Both Ports and Acts as a Server, in a Point-to-Point Connection Setup Using Mellanox-6x DX Cards Connected via 100G SFP Cable?
2. the interfaces of port 0 ca:00.0 is connected to interfaces of port 1 ca:00.1 of machine B and in the same way port 1 ca:00.1 of machine A is connected to port 0 ca:00.0 of machine B here.
3.here when i am running this command on machine A ./t-rex-64 --cfg /etc/trex_cfg.yaml -f astf/udp2.py -m 10 -d 1000 -c 1 -v 7 --astf , then here only one port (port 0)is generating the packet here , & when i am running this command on both machine A and B .