diff --git a/Doxyfile b/Doxyfile index cc299b8f..3761c782 100644 --- a/Doxyfile +++ b/Doxyfile @@ -1,7 +1,7 @@ -# Doxyfile 1.9.4 +# Doxyfile 1.12.0 # This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project. +# Doxygen (www.doxygen.org) for a project. # # All text after a double hash (##) is considered a comment and is placed in # front of the TAG it is preceding. @@ -15,11 +15,12 @@ # # Note: # -# Use doxygen to compare the used configuration file with the template +# Use Doxygen to compare the used configuration file with the template # configuration file: # doxygen -x [configFile] -# Use doxygen to compare the used configuration file with the template -# configuration file without replacing the environment variables: +# Use Doxygen to compare the used configuration file with the template +# configuration file without replacing the environment variables or CMake type +# replacement variables: # doxygen -x_noenv [configFile] #--------------------------------------------------------------------------- @@ -41,7 +42,7 @@ DOXYFILE_ENCODING = UTF-8 # title of most generated pages and in a few other places. # The default value is: My Project. -PROJECT_NAME = "Faker C++" +PROJECT_NAME = "My Project" # The PROJECT_NUMBER tag can be used to enter a project or revision number. This # could be handy for archiving the generated documentation or if some version @@ -60,19 +61,25 @@ PROJECT_BRIEF = # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy # the logo to the output directory. -PROJECT_LOGO = docs/public/logo.png +PROJECT_LOGO = + +# With the PROJECT_ICON tag one can specify an icon that is included in the tabs +# when the HTML document is shown. Doxygen will copy the logo to the output +# directory. + +PROJECT_ICON = # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path # into which the generated documentation will be written. If a relative path is -# entered, it will be relative to the location where doxygen was started. If +# entered, it will be relative to the location where Doxygen was started. If # left blank the current directory will be used. -OUTPUT_DIRECTORY = +OUTPUT_DIRECTORY = docs -# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096 +# If the CREATE_SUBDIRS tag is set to YES then Doxygen will create up to 4096 # sub-directories (in 2 levels) under the output directory of each output format # and will distribute the generated files over these directories. Enabling this -# option can be useful when feeding doxygen a huge amount of source files, where +# option can be useful when feeding Doxygen a huge amount of source files, where # putting all generated files in the same directory would otherwise causes # performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to # control the number of sub-directories. @@ -85,13 +92,13 @@ CREATE_SUBDIRS = NO # level increment doubles the number of directories, resulting in 4096 # directories at level 8 which is the default and also the maximum value. The # sub-directories are organized in 2 levels, the first level always has a fixed -# numer of 16 directories. +# number of 16 directories. # Minimum value: 0, maximum value: 8, default value: 8. # This tag requires that the tag CREATE_SUBDIRS is set to YES. CREATE_SUBDIRS_LEVEL = 8 -# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# If the ALLOW_UNICODE_NAMES tag is set to YES, Doxygen will allow non-ASCII # characters to appear in the names of generated files. If set to NO, non-ASCII # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode # U+3044. @@ -100,7 +107,7 @@ CREATE_SUBDIRS_LEVEL = 8 ALLOW_UNICODE_NAMES = NO # The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this +# documentation generated by Doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian, # Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English @@ -114,14 +121,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English -# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# If the BRIEF_MEMBER_DESC tag is set to YES, Doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. # The default value is: YES. BRIEF_MEMBER_DESC = YES -# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# If the REPEAT_BRIEF tag is set to YES, Doxygen will prepend the brief # description of a member or function before the detailed description # # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the @@ -152,13 +159,13 @@ ABBREVIATE_BRIEF = "The $name class" \ the # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# doxygen will generate a detailed section even if there is only a brief +# Doxygen will generate a detailed section even if there is only a brief # description. # The default value is: NO. ALWAYS_DETAILED_SEC = NO -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# If the INLINE_INHERITED_MEMB tag is set to YES, Doxygen will show all # inherited members of a class in the documentation of that class as if those # members were ordinary class members. Constructors, destructors and assignment # operators of the base classes will not be shown. @@ -166,7 +173,7 @@ ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO -# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# If the FULL_PATH_NAMES tag is set to YES, Doxygen will prepend the full path # before files name in the file list and in the header files. If set to NO the # shortest path that makes the file name unique will be used # The default value is: YES. @@ -176,11 +183,11 @@ FULL_PATH_NAMES = YES # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. # Stripping is only done if one of the specified strings matches the left-hand # part of the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the path to +# If left blank the directory from which Doxygen is run is used as the path to # strip. # # Note that you can specify absolute paths here, but also relative paths, which -# will be relative from the directory where doxygen is started. +# will be relative from the directory where Doxygen is started. # This tag requires that the tag FULL_PATH_NAMES is set to YES. STRIP_FROM_PATH = @@ -194,14 +201,14 @@ STRIP_FROM_PATH = STRIP_FROM_INC_PATH = -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# If the SHORT_NAMES tag is set to YES, Doxygen will generate much shorter (but # less readable) file names. This can be useful is your file systems doesn't # support long names like on DOS, Mac, or CD-ROM. # The default value is: NO. SHORT_NAMES = NO -# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen will interpret the # first line (until the first dot) of a Javadoc-style comment as the brief # description. If set to NO, the Javadoc-style will behave just like regular Qt- # style comments (thus requiring an explicit @brief command for a brief @@ -210,17 +217,17 @@ SHORT_NAMES = NO JAVADOC_AUTOBRIEF = NO -# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# If the JAVADOC_BANNER tag is set to YES then Doxygen will interpret a line # such as # /*************** # as being the beginning of a Javadoc-style comment "banner". If set to NO, the # Javadoc-style will behave just like regular comments and it will not be -# interpreted by doxygen. +# interpreted by Doxygen. # The default value is: NO. JAVADOC_BANNER = NO -# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus # requiring an explicit \brief command for a brief description.) @@ -228,7 +235,7 @@ JAVADOC_BANNER = NO QT_AUTOBRIEF = NO -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen treat a # multi-line C++ special comment block (i.e. a block of //! or /// comments) as # a brief description. This used to be the default behavior. The new default is # to treat a multi-line C++ comment block as a detailed description. Set this @@ -240,10 +247,10 @@ QT_AUTOBRIEF = NO MULTILINE_CPP_IS_BRIEF = NO -# By default Python docstrings are displayed as preformatted text and doxygen's +# By default Python docstrings are displayed as preformatted text and Doxygen's # special commands cannot be used. By setting PYTHON_DOCSTRING to NO the -# doxygen's special commands can be used and the contents of the docstring -# documentation blocks is shown as doxygen documentation. +# Doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as Doxygen documentation. # The default value is: YES. PYTHON_DOCSTRING = YES @@ -254,7 +261,7 @@ PYTHON_DOCSTRING = YES INHERIT_DOCS = YES -# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# If the SEPARATE_MEMBER_PAGES tag is set to YES then Doxygen will produce a new # page for each member. If set to NO, the documentation of a member will be part # of the file/class/namespace that contains it. # The default value is: NO. @@ -324,45 +331,56 @@ OPTIMIZE_OUTPUT_SLICE = NO # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and -# language is one of the parsers supported by doxygen: IDL, Java, JavaScript, +# language is one of the parsers supported by Doxygen: IDL, Java, JavaScript, # Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, # VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: # FortranFree, unknown formatted Fortran: Fortran. In the later case the parser # tries to guess whether the code is fixed or free formatted code, this is the -# default for Fortran type files). For instance to make doxygen treat .inc files +# default for Fortran type files). For instance to make Doxygen treat .inc files # as Fortran files (default is PHP), and .f files as C (default is Fortran), # use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise -# the files are not read by doxygen. When specifying no_extension you should add +# the files are not read by Doxygen. When specifying no_extension you should add # * to the FILE_PATTERNS. # # Note see also the list of default file extension mappings. EXTENSION_MAPPING = -# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# If the MARKDOWN_SUPPORT tag is enabled then Doxygen pre-processes all comments # according to the Markdown format, which allows for more readable # documentation. See https://daringfireball.net/projects/markdown/ for details. -# The output of markdown processing is further processed by doxygen, so you can -# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# The output of markdown processing is further processed by Doxygen, so you can +# mix Doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. # The default value is: YES. -MARKDOWN_SUPPORT = NO +MARKDOWN_SUPPORT = YES # When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up # to that level are automatically included in the table of contents, even if # they do not have an id attribute. # Note: This feature currently applies only to Markdown headings. -# Minimum value: 0, maximum value: 99, default value: 5. +# Minimum value: 0, maximum value: 99, default value: 6. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 6 + +# The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to +# generate identifiers for the Markdown headings. Note: Every identifier is +# unique. +# Possible values are: DOXYGEN use a fixed 'autotoc_md' string followed by a +# sequence number starting at 0 and GITHUB use the lower case version of title +# with any whitespace replaced by '-' and punctuation characters removed. +# The default value is: DOXYGEN. # This tag requires that the tag MARKDOWN_SUPPORT is set to YES. -TOC_INCLUDE_HEADINGS = 5 +MARKDOWN_ID_STYLE = DOXYGEN -# When enabled doxygen tries to link words that correspond to documented +# When enabled Doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or # globally by setting AUTOLINK_SUPPORT to NO. @@ -372,10 +390,10 @@ AUTOLINK_SUPPORT = YES # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want # to include (a tag file for) the STL sources as input, then you should set this -# tag to YES in order to let doxygen match functions declarations and +# tag to YES in order to let Doxygen match functions declarations and # definitions whose arguments contain STL classes (e.g. func(std::string); -# versus func(std::string) {}). This also make the inheritance and collaboration -# diagrams that involve STL classes more complete and accurate. +# versus func(std::string) {}). This also makes the inheritance and +# collaboration diagrams that involve STL classes more complete and accurate. # The default value is: NO. BUILTIN_STL_SUPPORT = NO @@ -387,16 +405,16 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen -# will parse them like normal C++ but will assume all classes use public instead -# of private inheritance when no explicit protection keyword is present. +# https://www.riverbankcomputing.com/software) sources only. Doxygen will parse +# them like normal C++ but will assume all classes use public instead of private +# inheritance when no explicit protection keyword is present. # The default value is: NO. SIP_SUPPORT = NO # For Microsoft's IDL there are propget and propput attributes to indicate # getter and setter methods for a property. Setting this option to YES will make -# doxygen to replace the get and set methods by a property in the documentation. +# Doxygen to replace the get and set methods by a property in the documentation. # This will only work if the methods are indeed getting or setting a simple # type. If this is not the case, or you want to show the methods anyway, you # should set this option to NO. @@ -405,7 +423,7 @@ SIP_SUPPORT = NO IDL_PROPERTY_SUPPORT = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES then doxygen will reuse the documentation of the first +# tag is set to YES then Doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. # The default value is: NO. @@ -463,18 +481,18 @@ TYPEDEF_HIDES_STRUCT = NO # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This # cache is used to resolve symbols given their name and scope. Since this can be # an expensive process and often the same symbol appears multiple times in the -# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small -# doxygen will become slower. If the cache is too large, memory is wasted. The +# code, Doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# Doxygen will become slower. If the cache is too large, memory is wasted. The # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 -# symbols. At the end of a run doxygen will report the cache usage and suggest +# symbols. At the end of a run Doxygen will report the cache usage and suggest # the optimal cache size from a speed point of view. # Minimum value: 0, maximum value: 9, default value: 0. LOOKUP_CACHE_SIZE = 0 -# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use -# during processing. When set to 0 doxygen will based this on the number of +# The NUM_PROC_THREADS specifies the number of threads Doxygen is allowed to use +# during processing. When set to 0 Doxygen will based this on the number of # cores available in the system. You can set it explicitly to a value larger # than 0 to get more control over the balance between CPU load and processing # speed. At this moment only the input processing can be done using multiple @@ -486,11 +504,19 @@ LOOKUP_CACHE_SIZE = 0 NUM_PROC_THREADS = 1 +# If the TIMESTAMP tag is set different from NO then each generated page will +# contain the date or date and time when the page was generated. Setting this to +# NO can help when comparing the output of multiple runs. +# Possible values are: YES, NO, DATETIME and DATE. +# The default value is: NO. + +TIMESTAMP = NO + #--------------------------------------------------------------------------- # Build related configuration options #--------------------------------------------------------------------------- -# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# If the EXTRACT_ALL tag is set to YES, Doxygen will assume all entities in # documentation are documented, even if no documentation was available. Private # class members and static file members will be hidden unless the # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. @@ -498,13 +524,13 @@ NUM_PROC_THREADS = 1 # normally produced when WARNINGS is set to YES. # The default value is: NO. -EXTRACT_ALL = YES +EXTRACT_ALL = NO # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will # be included in the documentation. # The default value is: NO. -EXTRACT_PRIVATE = YES +EXTRACT_PRIVATE = NO # If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual # methods of a class will be included in the documentation. @@ -516,13 +542,13 @@ EXTRACT_PRIV_VIRTUAL = NO # scope will be included in the documentation. # The default value is: NO. -EXTRACT_PACKAGE = YES +EXTRACT_PACKAGE = NO # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be # included in the documentation. # The default value is: NO. -EXTRACT_STATIC = YES +EXTRACT_STATIC = NO # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined # locally in source files will be included in the documentation. If set to NO, @@ -538,7 +564,7 @@ EXTRACT_LOCAL_CLASSES = YES # included. # The default value is: NO. -EXTRACT_LOCAL_METHODS = YES +EXTRACT_LOCAL_METHODS = NO # If this flag is set to YES, the members of anonymous namespaces will be # extracted and appear in the documentation as a namespace called @@ -556,7 +582,7 @@ EXTRACT_ANON_NSPACES = NO RESOLVE_UNNAMED_PARAMS = YES -# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # undocumented members inside documented classes or files. If set to NO these # members will be included in the various overviews, but no documentation # section is generated. This option has no effect if EXTRACT_ALL is enabled. @@ -564,22 +590,23 @@ RESOLVE_UNNAMED_PARAMS = YES HIDE_UNDOC_MEMBERS = NO -# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set # to NO, these classes will be included in the various overviews. This option -# has no effect if EXTRACT_ALL is enabled. +# will also hide undocumented C++ concepts if enabled. This option has no effect +# if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = NO -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all friend # declarations. If set to NO, these declarations will be included in the # documentation. # The default value is: NO. HIDE_FRIEND_COMPOUNDS = NO -# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any # documentation blocks found inside the body of a function. If set to NO, these # blocks will be appended to the function's detailed documentation block. # The default value is: NO. @@ -593,7 +620,7 @@ HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = NO -# With the correct setting of option CASE_SENSE_NAMES doxygen will better be +# With the correct setting of option CASE_SENSE_NAMES Doxygen will better be # able to match the capabilities of the underlying filesystem. In case the # filesystem is case sensitive (i.e. it supports files in the same directory # whose names only differ in casing), the option must be set to YES to properly @@ -602,21 +629,22 @@ INTERNAL_DOCS = NO # output files written for symbols that only differ in casing, such as for two # classes, one named CLASS and the other named Class, and to also support # references to files without having to specify the exact matching casing. On -# Windows (including Cygwin) and MacOS, users should typically set this option +# Windows (including Cygwin) and macOS, users should typically set this option # to NO, whereas on Linux or other Unix flavors it should typically be set to # YES. -# The default value is: system dependent. +# Possible values are: SYSTEM, NO and YES. +# The default value is: SYSTEM. -CASE_SENSE_NAMES = YES +CASE_SENSE_NAMES = SYSTEM -# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# If the HIDE_SCOPE_NAMES tag is set to NO then Doxygen will show members with # their full class and namespace scopes in the documentation. If set to YES, the # scope will be hidden. # The default value is: NO. HIDE_SCOPE_NAMES = NO -# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then Doxygen will # append additional text to a page's title, such as Class Reference. If set to # YES the compound reference will be hidden. # The default value is: NO. @@ -629,7 +657,7 @@ HIDE_COMPOUND_REFERENCE= NO SHOW_HEADERFILE = YES -# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# If the SHOW_INCLUDE_FILES tag is set to YES then Doxygen will put a list of # the files that are included by a file in the documentation of that file. # The default value is: YES. @@ -642,7 +670,7 @@ SHOW_INCLUDE_FILES = YES SHOW_GROUPED_MEMB_INC = NO -# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen will list include # files with double quotes in the documentation rather than with sharp brackets. # The default value is: NO. @@ -654,14 +682,14 @@ FORCE_LOCAL_INCLUDES = NO INLINE_INFO = YES -# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# If the SORT_MEMBER_DOCS tag is set to YES then Doxygen will sort the # (detailed) documentation of file and class members alphabetically by member # name. If set to NO, the members will appear in declaration order. # The default value is: YES. SORT_MEMBER_DOCS = YES -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# If the SORT_BRIEF_DOCS tag is set to YES then Doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member # name. If set to NO, the members will appear in declaration order. Note that # this will also influence the order of the classes in the class list. @@ -669,7 +697,7 @@ SORT_MEMBER_DOCS = YES SORT_BRIEF_DOCS = NO -# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then Doxygen will sort the # (brief and detailed) documentation of class members so that constructors and # destructors are listed first. If set to NO the constructors will appear in the # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. @@ -681,7 +709,7 @@ SORT_BRIEF_DOCS = NO SORT_MEMBERS_CTORS_1ST = NO -# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# If the SORT_GROUP_NAMES tag is set to YES then Doxygen will sort the hierarchy # of group names into alphabetical order. If set to NO the group names will # appear in their defined order. # The default value is: NO. @@ -698,11 +726,11 @@ SORT_GROUP_NAMES = NO SORT_BY_SCOPE_NAME = NO -# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# If the STRICT_PROTO_MATCHING option is enabled and Doxygen fails to do proper # type resolution of all parameters of a function it will reject a match between # the prototype and the implementation of a member function even if there is # only one candidate or it is obvious which candidate to choose by doing a -# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# simple string match. By disabling STRICT_PROTO_MATCHING Doxygen will still # accept a match between prototype and implementation in such cases. # The default value is: NO. @@ -772,25 +800,25 @@ SHOW_FILES = YES SHOW_NAMESPACES = YES # The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from +# Doxygen should invoke to get the current version for each file (typically from # the version control system). Doxygen will invoke the program by executing (via # popen()) the command command input-file, where command is the value of the # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided -# by doxygen. Whatever the program writes to standard output is used as the file +# by Doxygen. Whatever the program writes to standard output is used as the file # version. For an example see the documentation. FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed -# by doxygen. The layout file controls the global structure of the generated +# by Doxygen. The layout file controls the global structure of the generated # output files in an output format independent way. To create the layout file -# that represents doxygen's defaults, run doxygen with the -l option. You can +# that represents Doxygen's defaults, run Doxygen with the -l option. You can # optionally specify a file name after the option, if omitted DoxygenLayout.xml # will be used as the name of the layout file. See also section "Changing the # layout of pages" for information. # -# Note that if you run doxygen from a directory containing a file called -# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# Note that if you run Doxygen from a directory containing a file called +# DoxygenLayout.xml, Doxygen will parse it automatically even if the LAYOUT_FILE # tag is left empty. LAYOUT_FILE = @@ -805,19 +833,35 @@ LAYOUT_FILE = CITE_BIB_FILES = +# The EXTERNAL_TOOL_PATH tag can be used to extend the search path (PATH +# environment variable) so that external tools such as latex and gs can be +# found. +# Note: Directories specified with EXTERNAL_TOOL_PATH are added in front of the +# path already specified by the PATH variable, and are added in the order +# specified. +# Note: This option is particularly useful for macOS version 14 (Sonoma) and +# higher, when running Doxygen from Doxywizard, because in this case any user- +# defined changes to the PATH are ignored. A typical example on macOS is to set +# EXTERNAL_TOOL_PATH = /Library/TeX/texbin /usr/local/bin +# together with the standard path, the full search path used by doxygen when +# launching external tools will then become +# PATH=/Library/TeX/texbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin + +EXTERNAL_TOOL_PATH = + #--------------------------------------------------------------------------- # Configuration options related to warning and progress messages #--------------------------------------------------------------------------- # The QUIET tag can be used to turn on/off the messages that are generated to -# standard output by doxygen. If QUIET is set to YES this implies that the +# standard output by Doxygen. If QUIET is set to YES this implies that the # messages are off. # The default value is: NO. QUIET = NO # The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# generated to standard error (stderr) by Doxygen. If WARNINGS is set to YES # this implies that the warnings are on. # # Tip: Turn warnings on while writing the documentation. @@ -825,14 +869,14 @@ QUIET = NO WARNINGS = YES -# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# If the WARN_IF_UNDOCUMENTED tag is set to YES then Doxygen will generate # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag # will automatically be disabled. # The default value is: YES. WARN_IF_UNDOCUMENTED = YES -# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# If the WARN_IF_DOC_ERROR tag is set to YES, Doxygen will generate warnings for # potential errors in the documentation, such as documenting some parameters in # a documented function twice, or documenting parameters that don't exist or # using markup commands wrongly. @@ -840,8 +884,8 @@ WARN_IF_UNDOCUMENTED = YES WARN_IF_DOC_ERROR = YES -# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete -# function parameter documentation. If set to NO, doxygen will accept that some +# If WARN_IF_INCOMPLETE_DOC is set to YES, Doxygen will warn about incomplete +# function parameter documentation. If set to NO, Doxygen will accept that some # parameters have no documentation without warning. # The default value is: YES. @@ -849,7 +893,7 @@ WARN_IF_INCOMPLETE_DOC = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO, doxygen will only warn about wrong parameter +# value. If set to NO, Doxygen will only warn about wrong parameter # documentation, but not about the absence of documentation. If EXTRACT_ALL is # set to YES then this flag will automatically be disabled. See also # WARN_IF_INCOMPLETE_DOC @@ -857,16 +901,31 @@ WARN_IF_INCOMPLETE_DOC = YES WARN_NO_PARAMDOC = NO -# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, Doxygen will warn about +# undocumented enumeration values. If set to NO, Doxygen will accept +# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: NO. + +WARN_IF_UNDOC_ENUM_VAL = NO + +# If the WARN_AS_ERROR tag is set to YES then Doxygen will immediately stop when # a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS -# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but -# at the end of the doxygen process doxygen will return with a non-zero status. -# Possible values are: NO, YES and FAIL_ON_WARNINGS. +# then Doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the Doxygen process Doxygen will return with a non-zero status. +# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then Doxygen behaves +# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined Doxygen will not +# write the warning messages in between other messages but write them at the end +# of a run, in case a WARN_LOGFILE is defined the warning messages will be +# besides being in the defined file also be shown at the end of a run, unless +# the WARN_LOGFILE is defined as - i.e. standard output (stdout) in that case +# the behavior will remain as with the setting FAIL_ON_WARNINGS. +# Possible values are: NO, YES, FAIL_ON_WARNINGS and FAIL_ON_WARNINGS_PRINT. # The default value is: NO. WARN_AS_ERROR = NO -# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# The WARN_FORMAT tag determines the format of the warning messages that Doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated # and the warning text. Optionally the format may contain $version, which will @@ -879,7 +938,7 @@ WARN_FORMAT = "$file:$line: $text" # In the $text part of the WARN_FORMAT command it is possible that a reference # to a more specific place is given. To make it easier to jump to this place -# (outside of doxygen) the user can define a custom "cut" / "paste" string. +# (outside of Doxygen) the user can define a custom "cut" / "paste" string. # Example: # WARN_LINE_FORMAT = "'vi $file +$line'" # See also: WARN_FORMAT @@ -906,40 +965,55 @@ WARN_LOGFILE = # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. -INPUT = include/faker-cxx +INPUT = # This tag can be used to specify the character encoding of the source files -# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# that Doxygen parses. Internally Doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv # documentation (see: # https://www.gnu.org/software/libiconv/) for the list of possible encodings. +# See also: INPUT_FILE_ENCODING # The default value is: UTF-8. INPUT_ENCODING = UTF-8 +# This tag can be used to specify the character encoding of the source files +# that Doxygen parses The INPUT_FILE_ENCODING tag can be used to specify +# character encoding on a per file pattern basis. Doxygen will compare the file +# name with each pattern and apply the encoding instead of the default +# INPUT_ENCODING) if there is a match. The character encodings are a list of the +# form: pattern=encoding (like *.php=ISO-8859-1). +# See also: INPUT_ENCODING for further information on supported encodings. + +INPUT_FILE_ENCODING = + # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and # *.h) to filter out the source-files in the directories. # # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not -# read by doxygen. +# read by Doxygen. # # Note the list of default checked file patterns might differ from the list of # default file extension mappings. # -# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, -# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, -# *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, -# *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C -# comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, -# *.vhdl, *.ucf, *.qsf and *.ice. +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cxxm, +# *.cpp, *.cppm, *.ccm, *.c++, *.c++m, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, +# *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.ixx, *.l, *.cs, *.d, +# *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to +# be provided as Doxygen C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f18, *.f, *.for, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.c \ *.cc \ *.cxx \ + *.cxxm \ *.cpp \ + *.cppm \ + *.ccm \ *.c++ \ + *.c++m \ *.java \ *.ii \ *.ixx \ @@ -954,6 +1028,7 @@ FILE_PATTERNS = *.c \ *.hxx \ *.hpp \ *.h++ \ + *.ixx \ *.l \ *.cs \ *.d \ @@ -992,7 +1067,7 @@ RECURSIVE = NO # excluded from the INPUT source files. This way you can easily exclude a # subdirectory from a directory tree whose root is specified with the INPUT tag. # -# Note that relative paths are relative to the directory from which doxygen is +# Note that relative paths are relative to the directory from which Doxygen is # run. EXCLUDE = @@ -1018,9 +1093,6 @@ EXCLUDE_PATTERNS = # output. The symbol name can be a fully qualified name, a word, or if the # wildcard * is used, a substring. Examples: ANamespace, AClass, # ANamespace::AClass, ANamespace::*Test -# -# Note that the wildcards are matched against the file with absolute path, so to -# exclude all test directories use the pattern */test/* EXCLUDE_SYMBOLS = @@ -1050,7 +1122,7 @@ EXAMPLE_RECURSIVE = NO IMAGE_PATH = -# The INPUT_FILTER tag can be used to specify a program that doxygen should +# The INPUT_FILTER tag can be used to specify a program that Doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program # by executing (via popen()) the command: # @@ -1065,9 +1137,14 @@ IMAGE_PATH = # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. # +# Note that Doxygen will use the data processed and written to standard output +# for further processing, therefore nothing else, like debug statements or used +# commands (so in case of a Windows batch file always use @echo OFF), should be +# written to standard output. +# # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not -# properly processed by doxygen. +# properly processed by Doxygen. INPUT_FILTER = @@ -1080,7 +1157,7 @@ INPUT_FILTER = # # Note that for custom extensions or not directly supported extensions you also # need to set EXTENSION_MAPPING for the extension otherwise the files are not -# properly processed by doxygen. +# properly processed by Doxygen. FILTER_PATTERNS = @@ -1102,10 +1179,19 @@ FILTER_SOURCE_PATTERNS = # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that # is part of the input, its contents will be placed on the main page # (index.html). This can be useful if you have a project on for instance GitHub -# and want to reuse the introduction page also for the doxygen output. +# and want to reuse the introduction page also for the Doxygen output. USE_MDFILE_AS_MAINPAGE = +# The Fortran standard specifies that for fixed formatted Fortran code all +# characters from position 72 are to be considered as comment. A common +# extension is to allow longer lines before the automatic comment starts. The +# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can +# be processed before the automatic comment starts. +# Minimum value: 7, maximum value: 10000, default value: 72. + +FORTRAN_COMMENT_AFTER = 72 + #--------------------------------------------------------------------------- # Configuration options related to source browsing #--------------------------------------------------------------------------- @@ -1120,12 +1206,13 @@ USE_MDFILE_AS_MAINPAGE = SOURCE_BROWSER = NO # Setting the INLINE_SOURCES tag to YES will include the body of functions, -# classes and enums directly into the documentation. +# multi-line macros, enums or list initialized variables directly into the +# documentation. # The default value is: NO. INLINE_SOURCES = NO -# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct Doxygen to hide any # special comment blocks from generated source code fragments. Normal C, C++ and # Fortran comments will always remain visible. # The default value is: YES. @@ -1163,7 +1250,7 @@ REFERENCES_LINK_SOURCE = YES SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will -# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# point to the HTML generated by the htags(1) tool instead of Doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system # (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. @@ -1177,14 +1264,14 @@ SOURCE_TOOLTIPS = YES # Doxygen will invoke htags (and that will in turn invoke gtags), so these # tools must be available from the command line (i.e. in the search path). # -# The result: instead of the source browser generated by doxygen, the links to +# The result: instead of the source browser generated by Doxygen, the links to # source code will now point to the output of htags. # The default value is: NO. # This tag requires that the tag SOURCE_BROWSER is set to YES. USE_HTAGS = NO -# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# If the VERBATIM_HEADERS tag is set the YES then Doxygen will generate a # verbatim copy of the header file for each class for which an include is # specified. Set to NO to disable this. # See also: Section \class. @@ -1192,46 +1279,6 @@ USE_HTAGS = NO VERBATIM_HEADERS = YES -# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the -# clang parser (see: -# http://clang.llvm.org/) for more accurate parsing at the cost of reduced -# performance. This can be particularly helpful with template rich C++ code for -# which doxygen's built-in parser lacks the necessary type information. -# Note: The availability of this option depends on whether or not doxygen was -# generated with the -Duse_libclang=ON option for CMake. -# The default value is: NO. - -CLANG_ASSISTED_PARSING = NO - -# If the CLANG_ASSISTED_PARSING tag is set to YES and the CLANG_ADD_INC_PATHS -# tag is set to YES then doxygen will add the directory of each input to the -# include path. -# The default value is: YES. -# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. - -CLANG_ADD_INC_PATHS = YES - -# If clang assisted parsing is enabled you can provide the compiler with command -# line options that you would normally use when invoking the compiler. Note that -# the include paths will already be set by doxygen for the files and directories -# specified with INPUT and INCLUDE_PATH. -# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. - -CLANG_OPTIONS = - -# If clang assisted parsing is enabled you can provide the clang parser with the -# path to the directory containing a file called compile_commands.json. This -# file is the compilation database (see: -# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the -# options used when the source files were built. This is equivalent to -# specifying the -p option to a clang tool, such as clang-check. These options -# will then be passed to the parser. Any options specified with CLANG_OPTIONS -# will be added as well. -# Note: The availability of this option depends on whether or not doxygen was -# generated with the -Duse_libclang=ON option for CMake. - -CLANG_DATABASE_PATH = - #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1243,10 +1290,11 @@ CLANG_DATABASE_PATH = ALPHABETICAL_INDEX = YES -# In case all classes in a project start with a common prefix, all classes will -# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag -# can be used to specify a prefix (or a list of prefixes) that should be ignored -# while generating the index headers. +# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) +# that should be ignored while generating the index headers. The IGNORE_PREFIX +# tag works for classes, function and member names. The entity will be placed in +# the alphabetical list under the first letter of the entity name that remains +# after removing the prefix. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. IGNORE_PREFIX = @@ -1255,7 +1303,7 @@ IGNORE_PREFIX = # Configuration options related to the HTML output #--------------------------------------------------------------------------- -# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# If the GENERATE_HTML tag is set to YES, Doxygen will generate HTML output # The default value is: YES. GENERATE_HTML = YES @@ -1276,40 +1324,40 @@ HTML_OUTPUT = html HTML_FILE_EXTENSION = .html # The HTML_HEADER tag can be used to specify a user-defined HTML header file for -# each generated HTML page. If the tag is left blank doxygen will generate a +# each generated HTML page. If the tag is left blank Doxygen will generate a # standard header. # # To get valid HTML the header file that includes any scripts and style sheets -# that doxygen needs, which is dependent on the configuration options used (e.g. +# that Doxygen needs, which is dependent on the configuration options used (e.g. # the setting GENERATE_TREEVIEW). It is highly recommended to start with a # default header using # doxygen -w html new_header.html new_footer.html new_stylesheet.css # YourConfigFile # and then modify the file new_header.html. See also section "Doxygen usage" -# for information on how to generate the default header that doxygen normally +# for information on how to generate the default header that Doxygen normally # uses. # Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. For a description +# default header when upgrading to a newer version of Doxygen. For a description # of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_HEADER = # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each -# generated HTML page. If the tag is left blank doxygen will generate a standard +# generated HTML page. If the tag is left blank Doxygen will generate a standard # footer. See HTML_HEADER for more information on how to generate a default # footer and what special commands can be used inside the footer. See also # section "Doxygen usage" for information on how to generate the default footer -# that doxygen normally uses. +# that Doxygen normally uses. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style # sheet that is used by each HTML page. It can be used to fine-tune the look of -# the HTML output. If left blank doxygen will generate a default style sheet. +# the HTML output. If left blank Doxygen will generate a default style sheet. # See also section "Doxygen usage" for information on how to generate the style -# sheet that doxygen normally uses. +# sheet that Doxygen normally uses. # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as # it is more robust and this tag (HTML_STYLESHEET) will in the future become # obsolete. @@ -1319,18 +1367,21 @@ HTML_STYLESHEET = # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined # cascading style sheets that are included after the standard style sheets -# created by doxygen. Using this option one can overrule certain style aspects. +# created by Doxygen. Using this option one can overrule certain style aspects. # This is preferred over using HTML_STYLESHEET since it does not replace the # standard style sheet and is therefore more robust against future updates. # Doxygen will copy the style sheet files to the output directory. # Note: The order of the extra style sheet files is of importance (e.g. the last # style sheet in the list overrules the setting of the previous ones in the -# list). For an example see the documentation. +# list). +# Note: Since the styling of scrollbars can currently not be overruled in +# Webkit/Chromium, the styling will be left out of the default doxygen.css if +# one or more extra stylesheets have been specified. So if scrollbar +# customization is desired it has to be added explicitly. For an example see the +# documentation. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_EXTRA_STYLESHEET = doxygen-awesome-css/doxygen-awesome.css \ - doxygen-awesome-css/doxygen-awesome-sidebar-only.css - +HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note @@ -1342,6 +1393,19 @@ HTML_EXTRA_STYLESHEET = doxygen-awesome-css/doxygen-awesome.css \ HTML_EXTRA_FILES = +# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output +# should be rendered with a dark or light theme. +# Possible values are: LIGHT always generates light mode output, DARK always +# generates dark mode output, AUTO_LIGHT automatically sets the mode according +# to the user preference, uses light mode if no preference is set (the default), +# AUTO_DARK automatically sets the mode according to the user preference, uses +# dark mode if no preference is set and TOGGLE allows a user to switch between +# light and dark mode via a button. +# The default value is: AUTO_LIGHT. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE = AUTO_LIGHT + # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a color-wheel, see @@ -1372,15 +1436,6 @@ HTML_COLORSTYLE_SAT = 100 HTML_COLORSTYLE_GAMMA = 80 -# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML -# page will contain the date and time when the page was generated. Setting this -# to YES can help to show when doxygen was last run and thus if the -# documentation is up to date. -# The default value is: NO. -# This tag requires that the tag GENERATE_HTML is set to YES. - -HTML_TIMESTAMP = NO - # If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML # documentation will contain a main index with vertical navigation menus that # are dynamically created via JavaScript. If disabled, the navigation index will @@ -1400,6 +1455,33 @@ HTML_DYNAMIC_MENUS = YES HTML_DYNAMIC_SECTIONS = NO +# If the HTML_CODE_FOLDING tag is set to YES then classes and functions can be +# dynamically folded and expanded in the generated HTML source code. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_CODE_FOLDING = YES + +# If the HTML_COPY_CLIPBOARD tag is set to YES then Doxygen will show an icon in +# the top right corner of code and text fragments that allows the user to copy +# its content to the clipboard. Note this only works if supported by the browser +# and the web page is served via a secure context (see: +# https://www.w3.org/TR/secure-contexts/), i.e. using the https: or file: +# protocol. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COPY_CLIPBOARD = YES + +# Doxygen stores a couple of settings persistently in the browser (via e.g. +# cookies). By default these settings apply to all HTML pages generated by +# Doxygen across all projects. The HTML_PROJECT_COOKIE tag can be used to store +# the settings under a project specific key, such that the user preferences will +# be stored separately. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_PROJECT_COOKIE = + # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries # shown in the various tree structured indices initially; the user can expand # and collapse entries dynamically later on. Doxygen will expand the tree to @@ -1417,7 +1499,7 @@ HTML_INDEX_NUM_ENTRIES = 100 # generated that can be used as input for Apple's Xcode 3 integrated development # environment (see: # https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To -# create a documentation set, doxygen will generate a Makefile in the HTML +# create a documentation set, Doxygen will generate a Makefile in the HTML # output directory. Running make will produce the docset in that directory and # running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at @@ -1465,7 +1547,7 @@ DOCSET_PUBLISHER_ID = org.doxygen.Publisher DOCSET_PUBLISHER_NAME = Publisher -# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# If the GENERATE_HTMLHELP tag is set to YES then Doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop # on Windows. In the beginning of 2021 Microsoft took the original page, with @@ -1476,7 +1558,7 @@ DOCSET_PUBLISHER_NAME = Publisher # ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). # # The HTML Help Workshop contains a compiler that can convert all HTML output -# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# generated by Doxygen into a single compiled HTML file (.chm). Compiled HTML # files are now used as the Windows 98 help format, and will replace the old # Windows help format (.hlp) on all Windows platforms in the future. Compressed # HTML files also contain an index, a table of contents, and you can search for @@ -1496,7 +1578,7 @@ CHM_FILE = # The HHC_LOCATION tag can be used to specify the location (absolute path # including file name) of the HTML help compiler (hhc.exe). If non-empty, -# doxygen will try to run the HTML help compiler on the generated index.hhp. +# Doxygen will try to run the HTML help compiler on the generated index.hhp. # The file has to be specified with full path. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1530,6 +1612,16 @@ BINARY_TOC = NO TOC_EXPAND = NO +# The SITEMAP_URL tag is used to specify the full URL of the place where the +# generated documentation will be placed on the server by the user during the +# deployment of the documentation. The generated sitemap is called sitemap.xml +# and placed on the directory specified by HTML_OUTPUT. In case no SITEMAP_URL +# is specified no sitemap is generated. For information about the sitemap +# protocol see https://www.sitemaps.org +# This tag requires that the tag GENERATE_HTML is set to YES. + +SITEMAP_URL = + # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help @@ -1588,7 +1680,7 @@ QHP_CUST_FILTER_ATTRS = QHP_SECT_FILTER_ATTRS = # The QHG_LOCATION tag can be used to specify the location (absolute path -# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to +# including file name) of Qt's qhelpgenerator. If non-empty Doxygen will try to # run qhelpgenerator on the generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1633,14 +1725,14 @@ DISABLE_INDEX = NO # (i.e. any modern browser). Windows users are probably better off using the # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can # further fine tune the look of the index (see "Fine-tuning the output"). As an -# example, the default style sheet generated by doxygen has an example that +# example, the default style sheet generated by Doxygen has an example that # shows how to put an image at the root of the tree instead of the PROJECT_NAME. # Since the tree basically has the same information as the tab index, you could # consider setting DISABLE_INDEX to YES when enabling this option. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -GENERATE_TREEVIEW = YES +GENERATE_TREEVIEW = NO # When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the # FULL_SIDEBAR option determines if the side bar is limited to only the treeview @@ -1655,7 +1747,7 @@ GENERATE_TREEVIEW = YES FULL_SIDEBAR = NO # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that -# doxygen will group on one line in the generated HTML documentation. +# Doxygen will group on one line in the generated HTML documentation. # # Note that a value of 0 will completely suppress the enum values from appearing # in the overview section. @@ -1664,6 +1756,12 @@ FULL_SIDEBAR = NO ENUM_VALUES_PER_LINE = 4 +# When the SHOW_ENUM_VALUES tag is set doxygen will show the specified +# enumeration values besides the enumeration mnemonics. +# The default value is: NO. + +SHOW_ENUM_VALUES = NO + # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used # to set the initial width (in pixels) of the frame in which the tree is shown. # Minimum value: 0, maximum value: 1500, default value: 250. @@ -1671,21 +1769,21 @@ ENUM_VALUES_PER_LINE = 4 TREEVIEW_WIDTH = 250 -# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# If the EXT_LINKS_IN_WINDOW option is set to YES, Doxygen will open links to # external symbols imported via tag files in a separate window. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. EXT_LINKS_IN_WINDOW = NO -# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email +# If the OBFUSCATE_EMAILS tag is set to YES, Doxygen will obfuscate email # addresses. # The default value is: YES. # This tag requires that the tag GENERATE_HTML is set to YES. OBFUSCATE_EMAILS = YES -# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg +# If the HTML_FORMULA_FORMAT option is set to svg, Doxygen will use the pdf2svg # tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see # https://inkscape.org) to generate formulas as SVG images instead of PNGs for # the HTML output. These images will generally look nicer at scaled resolutions. @@ -1698,24 +1796,13 @@ HTML_FORMULA_FORMAT = png # Use this tag to change the font size of LaTeX formulas included as images in # the HTML documentation. When you change the font size after a successful -# doxygen run you need to manually remove any form_*.png images from the HTML +# Doxygen run you need to manually remove any form_*.png images from the HTML # output directory to force them to be regenerated. # Minimum value: 8, maximum value: 50, default value: 10. # This tag requires that the tag GENERATE_HTML is set to YES. FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANSPARENT tag to determine whether or not the images -# generated for formulas are transparent PNGs. Transparent PNGs are not -# supported properly for IE 6.0, but are supported on all modern browsers. -# -# Note that when changing this option you need to delete any form_*.png files in -# the HTML output directory before the changes have effect. -# The default value is: YES. -# This tag requires that the tag GENERATE_HTML is set to YES. - -FORMULA_TRANSPARENT = YES - # The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands # to create new LaTeX commands to be used in formulas as building blocks. See # the section "Including formulas" for details. @@ -1753,7 +1840,7 @@ MATHJAX_VERSION = MathJax_2 # Possible values are: HTML-CSS (which is slower, but has the best # compatibility. This is the name for Mathjax version 2, for MathJax version 3 # this will be translated into chtml), NativeMML (i.e. MathML. Only supported -# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This +# for MathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This # is the name for Mathjax version 3, for MathJax version 2 this will be # translated into HTML-CSS) and SVG. # The default value is: HTML-CSS. @@ -1787,7 +1874,7 @@ MATHJAX_RELPATH = MATHJAX_EXTENSIONS = -# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# The MATHJAX_CODEFILE tag can be used to specify a file with JavaScript pieces # of code that will be used on startup of the MathJax code. See the MathJax site # (see: # http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an @@ -1796,12 +1883,12 @@ MATHJAX_EXTENSIONS = MATHJAX_CODEFILE = -# When the SEARCHENGINE tag is enabled doxygen will generate a search box for -# the HTML output. The underlying search engine uses javascript and DHTML and +# When the SEARCHENGINE tag is enabled Doxygen will generate a search box for +# the HTML output. The underlying search engine uses JavaScript and DHTML and # should work on any modern browser. Note that when using HTML help # (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) # there is already a search function so this one should typically be disabled. -# For large projects the javascript based search engine can be slow, then +# For large projects the JavaScript based search engine can be slow, then # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to # search using the keyboard; to jump to the search box use + S # (what the is depends on the OS and browser, but it is typically @@ -1820,7 +1907,7 @@ SEARCHENGINE = YES # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using JavaScript. There # are two flavors of web server based searching depending on the EXTERNAL_SEARCH -# setting. When disabled, doxygen will generate a PHP script for searching and +# setting. When disabled, Doxygen will generate a PHP script for searching and # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing # and searching needs to be provided by external tools. See the section # "External Indexing and Searching" for details. @@ -1829,7 +1916,7 @@ SEARCHENGINE = YES SERVER_BASED_SEARCH = NO -# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# When EXTERNAL_SEARCH tag is enabled Doxygen will no longer generate the PHP # script for searching. Instead the search results are written to an XML file # which needs to be processed by an external indexer. Doxygen will invoke an # external search engine pointed to by the SEARCHENGINE_URL option to obtain the @@ -1874,7 +1961,7 @@ SEARCHDATA_FILE = searchdata.xml EXTERNAL_SEARCH_ID = -# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through Doxygen # projects other than the one defined by this configuration file, but that are # all added to the same external search index. Each project needs to have a # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of @@ -1888,10 +1975,10 @@ EXTRA_SEARCH_MAPPINGS = # Configuration options related to the LaTeX output #--------------------------------------------------------------------------- -# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. +# If the GENERATE_LATEX tag is set to YES, Doxygen will generate LaTeX output. # The default value is: YES. -GENERATE_LATEX = NO +GENERATE_LATEX = YES # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of @@ -1933,7 +2020,7 @@ MAKEINDEX_CMD_NAME = makeindex LATEX_MAKEINDEX_CMD = makeindex -# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX +# If the COMPACT_LATEX tag is set to YES, Doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. # The default value is: NO. @@ -1964,15 +2051,15 @@ EXTRA_PACKAGES = # The LATEX_HEADER tag can be used to specify a user-defined LaTeX header for # the generated LaTeX document. The header should contain everything until the -# first chapter. If it is left blank doxygen will generate a standard header. It +# first chapter. If it is left blank Doxygen will generate a standard header. It # is highly recommended to start with a default header using # doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty # and then modify the file new_header.tex. See also section "Doxygen usage" for -# information on how to generate the default header that doxygen normally uses. +# information on how to generate the default header that Doxygen normally uses. # # Note: Only use a user-defined header if you know what you are doing! # Note: The header is subject to change so you typically have to regenerate the -# default header when upgrading to a newer version of doxygen. The following +# default header when upgrading to a newer version of Doxygen. The following # commands have a special meaning inside the header (and footer): For a # description of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1981,10 +2068,10 @@ LATEX_HEADER = # The LATEX_FOOTER tag can be used to specify a user-defined LaTeX footer for # the generated LaTeX document. The footer should contain everything after the -# last chapter. If it is left blank doxygen will generate a standard footer. See +# last chapter. If it is left blank Doxygen will generate a standard footer. See # LATEX_HEADER for more information on how to generate a default footer and what # special commands can be used inside the footer. See also section "Doxygen -# usage" for information on how to generate the default footer that doxygen +# usage" for information on how to generate the default footer that Doxygen # normally uses. Note: Only use a user-defined footer if you know what you are # doing! # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1993,7 +2080,7 @@ LATEX_FOOTER = # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined # LaTeX style sheets that are included after the standard style sheets created -# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# by Doxygen. Using this option one can overrule certain style aspects. Doxygen # will copy the style sheet files to the output directory. # Note: The order of the extra style sheet files is of importance (e.g. the last # style sheet in the list overrules the setting of the previous ones in the @@ -2019,7 +2106,7 @@ LATEX_EXTRA_FILES = PDF_HYPERLINKS = YES -# If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as +# If the USE_PDFLATEX tag is set to YES, Doxygen will use the engine as # specified with LATEX_CMD_NAME to generate the PDF file directly from the LaTeX # files. Set this option to YES, to get a higher quality PDF documentation. # @@ -2029,15 +2116,22 @@ PDF_HYPERLINKS = YES USE_PDFLATEX = YES -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode -# command to the generated LaTeX files. This will instruct LaTeX to keep running -# if errors occur, instead of asking the user for help. +# The LATEX_BATCHMODE tag signals the behavior of LaTeX in case of an error. +# Possible values are: NO same as ERROR_STOP, YES same as BATCH, BATCH In batch +# mode nothing is printed on the terminal, errors are scrolled as if is +# hit at every error; missing files that TeX tries to input or request from +# keyboard input (\read on a not open input stream) cause the job to abort, +# NON_STOP In nonstop mode the diagnostic message will appear on the terminal, +# but there is no possibility of user interaction just like in batch mode, +# SCROLL In scroll mode, TeX will stop only for missing files to input or if +# keyboard input is necessary and ERROR_STOP In errorstop mode, TeX will stop at +# each error, asking for user intervention. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BATCHMODE = NO -# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# If the LATEX_HIDE_INDICES tag is set to YES then Doxygen will not include the # index chapters (such as File Index, Compound Index, etc.) in the output. # The default value is: NO. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -2052,14 +2146,6 @@ LATEX_HIDE_INDICES = NO LATEX_BIB_STYLE = plain -# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated -# page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: NO. -# This tag requires that the tag GENERATE_LATEX is set to YES. - -LATEX_TIMESTAMP = NO - # The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) # path from which the emoji images will be read. If a relative path is entered, # it will be relative to the LATEX_OUTPUT directory. If left blank the @@ -2072,7 +2158,7 @@ LATEX_EMOJI_DIRECTORY = # Configuration options related to the RTF output #--------------------------------------------------------------------------- -# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The +# If the GENERATE_RTF tag is set to YES, Doxygen will generate RTF output. The # RTF output is optimized for Word 97 and may not look too pretty with other RTF # readers/editors. # The default value is: NO. @@ -2087,7 +2173,7 @@ GENERATE_RTF = NO RTF_OUTPUT = rtf -# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF +# If the COMPACT_RTF tag is set to YES, Doxygen generates more compact RTF # documents. This may be useful for small projects and may help to save some # trees in general. # The default value is: NO. @@ -2107,28 +2193,36 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's +# Load stylesheet definitions from file. Syntax is similar to Doxygen's # configuration file, i.e. a series of assignments. You only have to provide # replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the -# default style sheet that doxygen normally uses. +# default style sheet that Doxygen normally uses. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's configuration file. A template extensions file can be +# similar to Doxygen's configuration file. A template extensions file can be # generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = +# The RTF_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the RTF_OUTPUT output directory. +# Note that the files will be copied as-is; there are no commands or markers +# available. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTRA_FILES = + #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- -# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for +# If the GENERATE_MAN tag is set to YES, Doxygen will generate man pages for # classes and files. # The default value is: NO. @@ -2159,7 +2253,7 @@ MAN_EXTENSION = .3 MAN_SUBDIR = -# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without # them the man command would be unable to find the correct page. @@ -2172,7 +2266,7 @@ MAN_LINKS = NO # Configuration options related to the XML output #--------------------------------------------------------------------------- -# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that +# If the GENERATE_XML tag is set to YES, Doxygen will generate an XML file that # captures the structure of the code including all documentation. # The default value is: NO. @@ -2186,7 +2280,7 @@ GENERATE_XML = NO XML_OUTPUT = xml -# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program +# If the XML_PROGRAMLISTING tag is set to YES, Doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size # of the XML output. @@ -2195,7 +2289,7 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES -# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, Doxygen will include # namespace members in file scope as well, matching the HTML output. # The default value is: NO. # This tag requires that the tag GENERATE_XML is set to YES. @@ -2206,7 +2300,7 @@ XML_NS_MEMB_FILE_SCOPE = NO # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- -# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files +# If the GENERATE_DOCBOOK tag is set to YES, Doxygen will generate Docbook files # that can be used to generate PDF. # The default value is: NO. @@ -2224,19 +2318,45 @@ DOCBOOK_OUTPUT = docbook # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- -# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# If the GENERATE_AUTOGEN_DEF tag is set to YES, Doxygen will generate an +# AutoGen Definitions (see https://autogen.sourceforge.net/) file that captures # the structure of the code including all documentation. Note that this feature # is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO +#--------------------------------------------------------------------------- +# Configuration options related to Sqlite3 output +#--------------------------------------------------------------------------- + +# If the GENERATE_SQLITE3 tag is set to YES Doxygen will generate a Sqlite3 +# database with symbols found by Doxygen stored in tables. +# The default value is: NO. + +GENERATE_SQLITE3 = NO + +# The SQLITE3_OUTPUT tag is used to specify where the Sqlite3 database will be +# put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put +# in front of it. +# The default directory is: sqlite3. +# This tag requires that the tag GENERATE_SQLITE3 is set to YES. + +SQLITE3_OUTPUT = sqlite3 + +# The SQLITE3_RECREATE_DB tag is set to YES, the existing doxygen_sqlite3.db +# database file will be recreated with each Doxygen run. If set to NO, Doxygen +# will warn if a database file is already found and not modify it. +# The default value is: YES. +# This tag requires that the tag GENERATE_SQLITE3 is set to YES. + +SQLITE3_RECREATE_DB = YES + #--------------------------------------------------------------------------- # Configuration options related to the Perl module output #--------------------------------------------------------------------------- -# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module +# If the GENERATE_PERLMOD tag is set to YES, Doxygen will generate a Perl module # file that captures the structure of the code including all documentation. # # Note that this feature is still experimental and incomplete at the moment. @@ -2244,7 +2364,7 @@ GENERATE_AUTOGEN_DEF = NO GENERATE_PERLMOD = NO -# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary +# If the PERLMOD_LATEX tag is set to YES, Doxygen will generate the necessary # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI # output from the Perl module output. # The default value is: NO. @@ -2274,13 +2394,13 @@ PERLMOD_MAKEVAR_PREFIX = # Configuration options related to the preprocessor #--------------------------------------------------------------------------- -# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all +# If the ENABLE_PREPROCESSING tag is set to YES, Doxygen will evaluate all # C-preprocessor directives found in the sources and include files. # The default value is: YES. ENABLE_PREPROCESSING = YES -# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# If the MACRO_EXPANSION tag is set to YES, Doxygen will expand all macro names # in the source code. If set to NO, only conditional compilation will be # performed. Macro expansion can be done in a controlled way by setting # EXPAND_ONLY_PREDEF to YES. @@ -2339,7 +2459,7 @@ PREDEFINED = EXPAND_AS_DEFINED = -# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# If the SKIP_FUNCTION_MACROS tag is set to YES then Doxygen's preprocessor will # remove all references to function-like macros that are alone on a line, have # an all uppercase name, and do not end with a semicolon. Such function macros # are typically used for boiler-plate code, and will confuse the parser if not @@ -2363,26 +2483,26 @@ SKIP_FUNCTION_MACROS = YES # section "Linking to external documentation" for more information about the use # of tag files. # Note: Each tag file must have a unique name (where the name does NOT include -# the path). If a tag file is not located in the directory in which doxygen is +# the path). If a tag file is not located in the directory in which Doxygen is # run, you must also specify the path to the tagfile here. TAGFILES = -# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# When a file name is specified after GENERATE_TAGFILE, Doxygen will create a # tag file that is based on the input files it reads. See section "Linking to # external documentation" for more information about the usage of tag files. GENERATE_TAGFILE = -# If the ALLEXTERNALS tag is set to YES, all external class will be listed in -# the class index. If set to NO, only the inherited external classes will be -# listed. +# If the ALLEXTERNALS tag is set to YES, all external classes and namespaces +# will be listed in the class and namespace index. If set to NO, only the +# inherited external classes will be listed. # The default value is: NO. ALLEXTERNALS = NO # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will be +# in the topic index. If set to NO, only the current project's groups will be # listed. # The default value is: YES. @@ -2396,33 +2516,26 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES #--------------------------------------------------------------------------- -# Configuration options related to the dot tool +# Configuration options related to diagram generator tools #--------------------------------------------------------------------------- -# You can include diagrams made with dia in doxygen documentation. Doxygen will -# then run dia to produce the diagram and insert it in the documentation. The -# DIA_PATH tag allows you to specify the directory where the dia binary resides. -# If left empty dia is assumed to be found in the default search path. - -DIA_PATH = - # If set to YES the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. HIDE_UNDOC_RELATIONS = YES -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# If you set the HAVE_DOT tag to YES then Doxygen will assume the dot tool is # available from the path. This tool is part of Graphviz (see: -# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent # Bell Labs. The other options in this section have no effect if this option is # set to NO -# The default value is: YES. +# The default value is: NO. -HAVE_DOT = YES +HAVE_DOT = NO -# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed -# to run in parallel. When set to 0 doxygen will base this on the number of +# The DOT_NUM_THREADS specifies the number of dot invocations Doxygen is allowed +# to run in parallel. When set to 0 Doxygen will base this on the number of # processors available in the system. You can set it explicitly to a value # larger than 0 to get control over the balance between CPU load and processing # speed. @@ -2431,59 +2544,83 @@ HAVE_DOT = YES DOT_NUM_THREADS = 0 -# When you want a differently looking font in the dot files that doxygen -# generates you can specify the font name using DOT_FONTNAME. You need to make -# sure dot is able to find the font, which can be done by putting it in a -# standard location or by setting the DOTFONTPATH environment variable or by -# setting DOT_FONTPATH to the directory containing the font. -# The default value is: Helvetica. +# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of +# subgraphs. When you want a differently looking font in the dot files that +# Doxygen generates you can specify fontname, fontcolor and fontsize attributes. +# For details please see Node, +# Edge and Graph Attributes specification You need to make sure dot is able +# to find the font, which can be done by putting it in a standard location or by +# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the +# directory containing the font. Default graphviz fontsize is 14. +# The default value is: fontname=Helvetica,fontsize=10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTNAME = Helvetica +DOT_COMMON_ATTR = "fontname=Helvetica,fontsize=10" -# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of -# dot graphs. -# Minimum value: 4, maximum value: 24, default value: 10. +# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can +# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. Complete documentation about +# arrows shapes. +# The default value is: labelfontname=Helvetica,labelfontsize=10. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTSIZE = 10 +DOT_EDGE_ATTR = "labelfontname=Helvetica,labelfontsize=10" -# By default doxygen will tell dot to use the default font as specified with -# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set -# the path where dot can find it using this tag. +# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes +# around nodes set 'shape=plain' or 'shape=plaintext' Shapes specification +# The default value is: shape=box,height=0.2,width=0.4. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NODE_ATTR = "shape=box,height=0.2,width=0.4" + +# You can set the path where dot can find font specified with fontname in +# DOT_COMMON_ATTR and others dot attributes. # This tag requires that the tag HAVE_DOT is set to YES. DOT_FONTPATH = -# If the CLASS_GRAPH tag is set to YES (or GRAPH) then doxygen will generate a -# graph for each documented class showing the direct and indirect inheritance -# relations. In case HAVE_DOT is set as well dot will be used to draw the graph, -# otherwise the built-in generator will be used. If the CLASS_GRAPH tag is set -# to TEXT the direct and indirect inheritance relations will be shown as texts / -# links. -# Possible values are: NO, YES, TEXT and GRAPH. +# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then Doxygen will +# generate a graph for each documented class showing the direct and indirect +# inheritance relations. In case the CLASS_GRAPH tag is set to YES or GRAPH and +# HAVE_DOT is enabled as well, then dot will be used to draw the graph. In case +# the CLASS_GRAPH tag is set to YES and HAVE_DOT is disabled or if the +# CLASS_GRAPH tag is set to BUILTIN, then the built-in generator will be used. +# If the CLASS_GRAPH tag is set to TEXT the direct and indirect inheritance +# relations will be shown as texts / links. Explicit enabling an inheritance +# graph or choosing a different representation for an inheritance graph of a +# specific class, can be accomplished by means of the command \inheritancegraph. +# Disabling an inheritance graph can be accomplished by means of the command +# \hideinheritancegraph. +# Possible values are: NO, YES, TEXT, GRAPH and BUILTIN. # The default value is: YES. CLASS_GRAPH = YES -# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# If the COLLABORATION_GRAPH tag is set to YES then Doxygen will generate a # graph for each documented class showing the direct and indirect implementation # dependencies (inheritance, containment, and class references variables) of the -# class with other documented classes. +# class with other documented classes. Explicit enabling a collaboration graph, +# when COLLABORATION_GRAPH is set to NO, can be accomplished by means of the +# command \collaborationgraph. Disabling a collaboration graph can be +# accomplished by means of the command \hidecollaborationgraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. COLLABORATION_GRAPH = YES -# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for -# groups, showing the direct groups dependencies. See also the chapter Grouping -# in the manual. +# If the GROUP_GRAPHS tag is set to YES then Doxygen will generate a graph for +# groups, showing the direct groups dependencies. Explicit enabling a group +# dependency graph, when GROUP_GRAPHS is set to NO, can be accomplished by means +# of the command \groupgraph. Disabling a directory graph can be accomplished by +# means of the command \hidegroupgraph. See also the chapter Grouping in the +# manual. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. GROUP_GRAPHS = YES -# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and +# If the UML_LOOK tag is set to YES, Doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. # The default value is: NO. @@ -2504,10 +2641,10 @@ UML_LOOK = NO UML_LIMIT_NUM_FIELDS = 10 -# If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and +# If the DOT_UML_DETAILS tag is set to NO, Doxygen will show attributes and # methods without types and arguments in the UML graphs. If the DOT_UML_DETAILS -# tag is set to YES, doxygen will add type and arguments for attributes and -# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen +# tag is set to YES, Doxygen will add type and arguments for attributes and +# methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, Doxygen # will not generate fields with class member information in the UML graphs. The # class diagrams will look similar to the default class diagrams but using UML # notation for the relationships. @@ -2519,8 +2656,8 @@ DOT_UML_DETAILS = NO # The DOT_WRAP_THRESHOLD tag can be used to set the maximum number of characters # to display on a single line. If the actual line length exceeds this threshold -# significantly it will wrapped across multiple lines. Some heuristics are apply -# to avoid ugly line breaks. +# significantly it will be wrapped across multiple lines. Some heuristics are +# applied to avoid ugly line breaks. # Minimum value: 0, maximum value: 1000, default value: 17. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2535,24 +2672,29 @@ DOT_WRAP_THRESHOLD = 17 TEMPLATE_RELATIONS = NO # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to -# YES then doxygen will generate a graph for each documented file showing the +# YES then Doxygen will generate a graph for each documented file showing the # direct and indirect include dependencies of the file with other documented -# files. +# files. Explicit enabling an include graph, when INCLUDE_GRAPH is is set to NO, +# can be accomplished by means of the command \includegraph. Disabling an +# include graph can be accomplished by means of the command \hideincludegraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. INCLUDE_GRAPH = YES # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are -# set to YES then doxygen will generate a graph for each documented file showing +# set to YES then Doxygen will generate a graph for each documented file showing # the direct and indirect include dependencies of the file with other documented -# files. +# files. Explicit enabling an included by graph, when INCLUDED_BY_GRAPH is set +# to NO, can be accomplished by means of the command \includedbygraph. Disabling +# an included by graph can be accomplished by means of the command +# \hideincludedbygraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. INCLUDED_BY_GRAPH = YES -# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# If the CALL_GRAPH tag is set to YES then Doxygen will generate a call # dependency graph for every global function or class method. # # Note that enabling this option will significantly increase the time of a run. @@ -2564,7 +2706,7 @@ INCLUDED_BY_GRAPH = YES CALL_GRAPH = NO -# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# If the CALLER_GRAPH tag is set to YES then Doxygen will generate a caller # dependency graph for every global function or class method. # # Note that enabling this option will significantly increase the time of a run. @@ -2576,17 +2718,20 @@ CALL_GRAPH = NO CALLER_GRAPH = NO -# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# If the GRAPHICAL_HIERARCHY tag is set to YES then Doxygen will graphical # hierarchy of all classes instead of a textual one. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. GRAPHICAL_HIERARCHY = YES -# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# If the DIRECTORY_GRAPH tag is set to YES then Doxygen will show the # dependencies a directory has on other directories in a graphical way. The # dependency relations are determined by the #include relations between the -# files in the directories. +# files in the directories. Explicit enabling a directory graph, when +# DIRECTORY_GRAPH is set to NO, can be accomplished by means of the command +# \directorygraph. Disabling a directory graph can be accomplished by means of +# the command \hidedirectorygraph. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2602,13 +2747,12 @@ DIR_GRAPH_MAX_DEPTH = 1 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images # generated by dot. For an explanation of the image formats see the section # output formats in the documentation of the dot tool (Graphviz (see: -# http://www.graphviz.org/)). +# https://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, -# gif, gif:cairo, gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, -# png:cairo, png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and # png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2640,11 +2784,12 @@ DOT_PATH = DOTFILE_DIRS = -# The MSCFILE_DIRS tag can be used to specify one or more directories that -# contain msc files that are included in the documentation (see the \mscfile -# command). +# You can include diagrams made with dia in Doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. -MSCFILE_DIRS = +DIA_PATH = # The DIAFILE_DIRS tag can be used to specify one or more directories that # contain dia files that are included in the documentation (see the \diafile @@ -2652,7 +2797,7 @@ MSCFILE_DIRS = DIAFILE_DIRS = -# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# When using PlantUML, the PLANTUML_JAR_PATH tag should be used to specify the # path where java can find the plantuml.jar file or to the filename of jar file # to be used. If left blank, it is assumed PlantUML is not used or called during # a preprocessing step. Doxygen will generate a warning when it encounters a @@ -2660,20 +2805,20 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = -# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a -# configuration file for plantuml. +# When using PlantUML, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for PlantUML. PLANTUML_CFG_FILE = -# When using plantuml, the specified paths are searched for files specified by -# the !include statement in a plantuml block. +# When using PlantUML, the specified paths are searched for files specified by +# the !include statement in a PlantUML block. PLANTUML_INCLUDE_PATH = # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes -# larger than this value, doxygen will truncate the graph, which is visualized -# by representing a node as a red box. Note that doxygen if the number of direct +# larger than this value, Doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that if the number of direct # children of the root node in a graph is already larger than # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that # the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. @@ -2694,18 +2839,6 @@ DOT_GRAPH_MAX_NODES = 50 MAX_DOT_GRAPH_DEPTH = 0 -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, because dot on Windows does not seem -# to support this out of the box. -# -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). -# The default value is: NO. -# This tag requires that the tag HAVE_DOT is set to YES. - -DOT_TRANSPARENT = NO - # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This # makes dot run faster, but since only newer versions of dot (>1.8.10) support @@ -2715,17 +2848,17 @@ DOT_TRANSPARENT = NO DOT_MULTI_TARGETS = NO -# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# If the GENERATE_LEGEND tag is set to YES Doxygen will generate a legend page # explaining the meaning of the various boxes and arrows in the dot generated # graphs. -# Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal +# Note: This tag requires that UML_LOOK isn't set, i.e. the Doxygen internal # graphical representation for inheritance and collaboration diagrams is used. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate +# If the DOT_CLEANUP tag is set to YES, Doxygen will remove the intermediate # files that are used to generate the various graphs. # # Note: This setting is not only used for dot files but also for msc temporary @@ -2734,4 +2867,18 @@ GENERATE_LEGEND = YES DOT_CLEANUP = YES -HTML_COLORSTYLE = LIGHT +# You can define message sequence charts within Doxygen comments using the \msc +# command. If the MSCGEN_TOOL tag is left empty (the default), then Doxygen will +# use a built-in version of mscgen tool to produce the charts. Alternatively, +# the MSCGEN_TOOL tag can also specify the name an external tool. For instance, +# specifying prog as the value, Doxygen will call the tool as prog -T +# -o . The external tool should support +# output file formats "png", "eps", "svg", and "ismap". + +MSCGEN_TOOL = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = diff --git a/Doxyfile.bak b/Doxyfile.bak new file mode 100644 index 00000000..1a96b077 --- /dev/null +++ b/Doxyfile.bak @@ -0,0 +1,2884 @@ +# Doxyfile 1.12.0 + +# This file describes the settings to be used by the documentation system +# Doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). +# +# Note: +# +# Use Doxygen to compare the used configuration file with the template +# configuration file: +# doxygen -x [configFile] +# Use Doxygen to compare the used configuration file with the template +# configuration file without replacing the environment variables or CMake type +# replacement variables: +# doxygen -x_noenv [configFile] + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "My Project" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# With the PROJECT_ICON tag one can specify an icon that is included in the tabs +# when the HTML document is shown. Doxygen will copy the logo to the output +# directory. + +PROJECT_ICON = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where Doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = docs + +# If the CREATE_SUBDIRS tag is set to YES then Doxygen will create up to 4096 +# sub-directories (in 2 levels) under the output directory of each output format +# and will distribute the generated files over these directories. Enabling this +# option can be useful when feeding Doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to +# control the number of sub-directories. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# Controls the number of sub-directories that will be created when +# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every +# level increment doubles the number of directories, resulting in 4096 +# directories at level 8 which is the default and also the maximum value. The +# sub-directories are organized in 2 levels, the first level always has a fixed +# number of 16 directories. +# Minimum value: 0, maximum value: 8, default value: 8. +# This tag requires that the tag CREATE_SUBDIRS is set to YES. + +CREATE_SUBDIRS_LEVEL = 8 + +# If the ALLOW_UNICODE_NAMES tag is set to YES, Doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by Doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian, +# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English +# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek, +# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with +# English messages), Korean, Korean-en (Korean with English messages), Latvian, +# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, +# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, +# Swedish, Turkish, Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, Doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, Doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, Doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, Doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which Doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where Doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, Doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the JAVADOC_BANNER tag is set to YES then Doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by Doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# By default Python docstrings are displayed as preformatted text and Doxygen's +# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the +# Doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as Doxygen documentation. +# The default value is: YES. + +PYTHON_DOCSTRING = YES + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then Doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:^^" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". Note that you cannot put \n's in the value part of an alias +# to insert newlines (in the resulting output). You can put ^^ in the value part +# of an alias to insert a newline as if a physical newline was in the original +# file. When you need a literal { or } or , in the value part of an alias you +# have to escape them by means of a backslash (\), this can lead to conflicts +# with the commands \{ and \} for these it is advised to use the version @{ and +# @} or use a double escape (\\{ and \\}) + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by Doxygen: IDL, Java, JavaScript, +# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, +# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files). For instance to make Doxygen treat .inc files +# as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by Doxygen. When specifying no_extension you should add +# * to the FILE_PATTERNS. +# +# Note see also the list of default file extension mappings. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then Doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See https://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by Doxygen, so you can +# mix Doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = YES + +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 6. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 6 + +# The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to +# generate identifiers for the Markdown headings. Note: Every identifier is +# unique. +# Possible values are: DOXYGEN use a fixed 'autotoc_md' string followed by a +# sequence number starting at 0 and GITHUB use the lower case version of title +# with any whitespace replaced by '-' and punctuation characters removed. +# The default value is: DOXYGEN. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +MARKDOWN_ID_STYLE = DOXYGEN + +# When enabled Doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let Doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also makes the inheritance and +# collaboration diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# https://www.riverbankcomputing.com/software) sources only. Doxygen will parse +# them like normal C++ but will assume all classes use public instead of private +# inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# Doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then Doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, Doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# Doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run Doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +# The NUM_PROC_THREADS specifies the number of threads Doxygen is allowed to use +# during processing. When set to 0 Doxygen will based this on the number of +# cores available in the system. You can set it explicitly to a value larger +# than 0 to get more control over the balance between CPU load and processing +# speed. At this moment only the input processing can be done using multiple +# threads. Since this is still an experimental feature the default is set to 1, +# which effectively disables parallel processing. Please report any issues you +# encounter. Generating dot graphs in parallel is controlled by the +# DOT_NUM_THREADS setting. +# Minimum value: 0, maximum value: 32, default value: 1. + +NUM_PROC_THREADS = 1 + +# If the TIMESTAMP tag is set different from NO then each generated page will +# contain the date or date and time when the page was generated. Setting this to +# NO can help when comparing the output of multiple runs. +# Possible values are: YES, NO, DATETIME and DATE. +# The default value is: NO. + +TIMESTAMP = NO + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, Doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If this flag is set to YES, the name of an unnamed parameter in a declaration +# will be determined by the corresponding definition. By default unnamed +# parameters remain unnamed in the output. +# The default value is: YES. + +RESOLVE_UNNAMED_PARAMS = YES + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# will also hide undocumented C++ concepts if enabled. This option has no effect +# if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all friend +# declarations. If set to NO, these declarations will be included in the +# documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# With the correct setting of option CASE_SENSE_NAMES Doxygen will better be +# able to match the capabilities of the underlying filesystem. In case the +# filesystem is case sensitive (i.e. it supports files in the same directory +# whose names only differ in casing), the option must be set to YES to properly +# deal with such files in case they appear in the input. For filesystems that +# are not case sensitive the option should be set to NO to properly deal with +# output files written for symbols that only differ in casing, such as for two +# classes, one named CLASS and the other named Class, and to also support +# references to files without having to specify the exact matching casing. On +# Windows (including Cygwin) and macOS, users should typically set this option +# to NO, whereas on Linux or other Unix flavors it should typically be set to +# YES. +# Possible values are: SYSTEM, NO and YES. +# The default value is: SYSTEM. + +CASE_SENSE_NAMES = SYSTEM + +# If the HIDE_SCOPE_NAMES tag is set to NO then Doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then Doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class +# will show which file needs to be included to use the class. +# The default value is: YES. + +SHOW_HEADERFILE = YES + +# If the SHOW_INCLUDE_FILES tag is set to YES then Doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then Doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then Doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then Doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then Doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and Doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING Doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if ... \endif and \cond +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# Doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by Doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by Doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents Doxygen's defaults, run Doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. See also section "Changing the +# layout of pages" for information. +# +# Note that if you run Doxygen from a directory containing a file called +# DoxygenLayout.xml, Doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +# The EXTERNAL_TOOL_PATH tag can be used to extend the search path (PATH +# environment variable) so that external tools such as latex and gs can be +# found. +# Note: Directories specified with EXTERNAL_TOOL_PATH are added in front of the +# path already specified by the PATH variable, and are added in the order +# specified. +# Note: This option is particularly useful for macOS version 14 (Sonoma) and +# higher, when running Doxygen from Doxywizard, because in this case any user- +# defined changes to the PATH are ignored. A typical example on macOS is to set +# EXTERNAL_TOOL_PATH = /Library/TeX/texbin /usr/local/bin +# together with the standard path, the full search path used by doxygen when +# launching external tools will then become +# PATH=/Library/TeX/texbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin + +EXTERNAL_TOOL_PATH = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by Doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by Doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then Doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, Doxygen will generate warnings for +# potential errors in the documentation, such as documenting some parameters in +# a documented function twice, or documenting parameters that don't exist or +# using markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# If WARN_IF_INCOMPLETE_DOC is set to YES, Doxygen will warn about incomplete +# function parameter documentation. If set to NO, Doxygen will accept that some +# parameters have no documentation without warning. +# The default value is: YES. + +WARN_IF_INCOMPLETE_DOC = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, Doxygen will only warn about wrong parameter +# documentation, but not about the absence of documentation. If EXTRACT_ALL is +# set to YES then this flag will automatically be disabled. See also +# WARN_IF_INCOMPLETE_DOC +# The default value is: NO. + +WARN_NO_PARAMDOC = NO + +# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, Doxygen will warn about +# undocumented enumeration values. If set to NO, Doxygen will accept +# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: NO. + +WARN_IF_UNDOC_ENUM_VAL = NO + +# If the WARN_AS_ERROR tag is set to YES then Doxygen will immediately stop when +# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS +# then Doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the Doxygen process Doxygen will return with a non-zero status. +# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then Doxygen behaves +# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined Doxygen will not +# write the warning messages in between other messages but write them at the end +# of a run, in case a WARN_LOGFILE is defined the warning messages will be +# besides being in the defined file also be shown at the end of a run, unless +# the WARN_LOGFILE is defined as - i.e. standard output (stdout) in that case +# the behavior will remain as with the setting FAIL_ON_WARNINGS. +# Possible values are: NO, YES, FAIL_ON_WARNINGS and FAIL_ON_WARNINGS_PRINT. +# The default value is: NO. + +WARN_AS_ERROR = NO + +# The WARN_FORMAT tag determines the format of the warning messages that Doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# See also: WARN_LINE_FORMAT +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# In the $text part of the WARN_FORMAT command it is possible that a reference +# to a more specific place is given. To make it easier to jump to this place +# (outside of Doxygen) the user can define a custom "cut" / "paste" string. +# Example: +# WARN_LINE_FORMAT = "'vi $file +$line'" +# See also: WARN_FORMAT +# The default value is: at line $line of file $file. + +WARN_LINE_FORMAT = "at line $line of file $file" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). In case the file specified cannot be opened for writing the +# warning and error messages are written to standard error. When as file - is +# specified the warning and error messages are written to standard output +# (stdout). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING +# Note: If this tag is empty the current directory is searched. + +INPUT = src include + +# This tag can be used to specify the character encoding of the source files +# that Doxygen parses. Internally Doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: +# https://www.gnu.org/software/libiconv/) for the list of possible encodings. +# See also: INPUT_FILE_ENCODING +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# This tag can be used to specify the character encoding of the source files +# that Doxygen parses The INPUT_FILE_ENCODING tag can be used to specify +# character encoding on a per file pattern basis. Doxygen will compare the file +# name with each pattern and apply the encoding instead of the default +# INPUT_ENCODING) if there is a match. The character encodings are a list of the +# form: pattern=encoding (like *.php=ISO-8859-1). +# See also: INPUT_ENCODING for further information on supported encodings. + +INPUT_FILE_ENCODING = + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by Doxygen. +# +# Note the list of default checked file patterns might differ from the list of +# default file extension mappings. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cxxm, +# *.cpp, *.cppm, *.ccm, *.c++, *.c++m, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, +# *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.ixx, *.l, *.cs, *.d, +# *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to +# be provided as Doxygen C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f18, *.f, *.for, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. + +FILE_PATTERNS = *.c \ + *.cc \ + *.cxx \ + *.cxxm \ + *.cpp \ + *.cppm \ + *.ccm \ + *.c++ \ + *.c++m \ + *.java \ + *.ii \ + *.ixx \ + *.ipp \ + *.i++ \ + *.inl \ + *.idl \ + *.ddl \ + *.odl \ + *.h \ + *.hh \ + *.hxx \ + *.hpp \ + *.h++ \ + *.ixx \ + *.l \ + *.cs \ + *.d \ + *.php \ + *.php4 \ + *.php5 \ + *.phtml \ + *.inc \ + *.m \ + *.markdown \ + *.md \ + *.mm \ + *.dox \ + *.py \ + *.pyw \ + *.f90 \ + *.f95 \ + *.f03 \ + *.f08 \ + *.f18 \ + *.f \ + *.for \ + *.vhd \ + *.vhdl \ + *.ucf \ + *.qsf \ + *.ice + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which Doxygen is +# run. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# ANamespace::AClass, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that Doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# +# +# where is the value of the INPUT_FILTER tag, and is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. +# +# Note that Doxygen will use the data processed and written to standard output +# for further processing, therefore nothing else, like debug statements or used +# commands (so in case of a Windows batch file always use @echo OFF), should be +# written to standard output. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by Doxygen. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by Doxygen. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the Doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +# The Fortran standard specifies that for fixed formatted Fortran code all +# characters from position 72 are to be considered as comment. A common +# extension is to allow longer lines before the automatic comment starts. The +# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can +# be processed before the automatic comment starts. +# Minimum value: 7, maximum value: 10000, default value: 72. + +FORTRAN_COMMENT_AFTER = 72 + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# multi-line macros, enums or list initialized variables directly into the +# documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct Doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# entity all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = YES + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of Doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see https://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by Doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then Doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) +# that should be ignored while generating the index headers. The IGNORE_PREFIX +# tag works for classes, function and member names. The entity will be placed in +# the alphabetical list under the first letter of the entity name that remains +# after removing the prefix. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, Doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank Doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that Doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that Doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of Doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank Doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that Doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank Doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that Doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by Doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# Note: Since the styling of scrollbars can currently not be overruled in +# Webkit/Chromium, the styling will be left out of the default doxygen.css if +# one or more extra stylesheets have been specified. So if scrollbar +# customization is desired it has to be added explicitly. For an example see the +# documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output +# should be rendered with a dark or light theme. +# Possible values are: LIGHT always generates light mode output, DARK always +# generates dark mode output, AUTO_LIGHT automatically sets the mode according +# to the user preference, uses light mode if no preference is set (the default), +# AUTO_DARK automatically sets the mode according to the user preference, uses +# dark mode if no preference is set and TOGGLE allows a user to switch between +# light and dark mode via a button. +# The default value is: AUTO_LIGHT. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE = AUTO_LIGHT + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a color-wheel, see +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use gray-scales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via JavaScript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have JavaScript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = NO + +# If the HTML_CODE_FOLDING tag is set to YES then classes and functions can be +# dynamically folded and expanded in the generated HTML source code. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_CODE_FOLDING = YES + +# If the HTML_COPY_CLIPBOARD tag is set to YES then Doxygen will show an icon in +# the top right corner of code and text fragments that allows the user to copy +# its content to the clipboard. Note this only works if supported by the browser +# and the web page is served via a secure context (see: +# https://www.w3.org/TR/secure-contexts/), i.e. using the https: or file: +# protocol. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COPY_CLIPBOARD = YES + +# Doxygen stores a couple of settings persistently in the browser (via e.g. +# cookies). By default these settings apply to all HTML pages generated by +# Doxygen across all projects. The HTML_PROJECT_COOKIE tag can be used to store +# the settings under a project specific key, such that the user preferences will +# be stored separately. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_PROJECT_COOKIE = + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: +# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To +# create a documentation set, Doxygen will generate a Makefile in the HTML +# output directory. Running make will produce the docset in that directory and +# running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag determines the URL of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDURL = + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then Doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# on Windows. In the beginning of 2021 Microsoft took the original page, with +# a.o. the download links, offline the HTML help workshop was already many years +# in maintenance mode). You can download the HTML help workshop from the web +# archives at Installation executable (see: +# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo +# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by Doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# Doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the main .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = NO + +# The SITEMAP_URL tag is used to specify the full URL of the place where the +# generated documentation will be placed on the server by the user during the +# deployment of the documentation. The generated sitemap is called sitemap.xml +# and placed on the directory specified by HTML_OUTPUT. In case no SITEMAP_URL +# is specified no sitemap is generated. For information about the sitemap +# protocol see https://www.sitemaps.org +# This tag requires that the tag GENERATE_HTML is set to YES. + +SITEMAP_URL = + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location (absolute path +# including file name) of Qt's qhelpgenerator. If non-empty Doxygen will try to +# run qhelpgenerator on the generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine tune the look of the index (see "Fine-tuning the output"). As an +# example, the default style sheet generated by Doxygen has an example that +# shows how to put an image at the root of the tree instead of the PROJECT_NAME. +# Since the tree basically has the same information as the tab index, you could +# consider setting DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = NO + +# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the +# FULL_SIDEBAR option determines if the side bar is limited to only the treeview +# area (value NO) or if it should extend to the full height of the window (value +# YES). Setting this to YES gives a layout similar to +# https://docs.readthedocs.io with more room for contents, but less room for the +# project logo, title, and description. If either GENERATE_TREEVIEW or +# DISABLE_INDEX is set to NO, this option has no effect. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FULL_SIDEBAR = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# Doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 4 + +# When the SHOW_ENUM_VALUES tag is set doxygen will show the specified +# enumeration values besides the enumeration mnemonics. +# The default value is: NO. + +SHOW_ENUM_VALUES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, Doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# If the OBFUSCATE_EMAILS tag is set to YES, Doxygen will obfuscate email +# addresses. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +OBFUSCATE_EMAILS = YES + +# If the HTML_FORMULA_FORMAT option is set to svg, Doxygen will use the pdf2svg +# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see +# https://inkscape.org) to generate formulas as SVG images instead of PNGs for +# the HTML output. These images will generally look nicer at scaled resolutions. +# Possible values are: png (the default) and svg (looks nicer but requires the +# pdf2svg or inkscape tool). +# The default value is: png. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FORMULA_FORMAT = png + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# Doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands +# to create new LaTeX commands to be used in formulas as building blocks. See +# the section "Including formulas" for details. + +FORMULA_MACROFILE = + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# https://www.mathjax.org) which uses client side JavaScript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# With MATHJAX_VERSION it is possible to specify the MathJax version to be used. +# Note that the different versions of MathJax have different requirements with +# regards to the different settings, so it is possible that also other MathJax +# settings have to be changed when switching between the different MathJax +# versions. +# Possible values are: MathJax_2 and MathJax_3. +# The default value is: MathJax_2. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_VERSION = MathJax_2 + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. For more details about the output format see MathJax +# version 2 (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3 +# (see: +# http://docs.mathjax.org/en/latest/web/components/output.html). +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility. This is the name for Mathjax version 2, for MathJax version 3 +# this will be translated into chtml), NativeMML (i.e. MathML. Only supported +# for MathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This +# is the name for Mathjax version 3, for MathJax version 2 this will be +# translated into HTML-CSS) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from https://www.mathjax.org before deployment. The default value is: +# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2 +# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3 +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# for MathJax version 2 (see +# https://docs.mathjax.org/en/v2.7-latest/tex.html#tex-and-latex-extensions): +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# For example for MathJax version 3 (see +# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html): +# MATHJAX_EXTENSIONS = ams +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with JavaScript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled Doxygen will generate a search box for +# the HTML output. The underlying search engine uses JavaScript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the JavaScript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use + S +# (what the is depends on the OS and browser, but it is typically +# , /