Skip to content

Latest commit

 

History

History
53 lines (43 loc) · 1.03 KB

KLIPPER_FIRMWARE_UPDATE_ALL.md

File metadata and controls

53 lines (43 loc) · 1.03 KB
Raw

Firmware Update - HermitCrab2

cd ~/klipper
make clean

cp _config.BTT-HermitCrab2 .config
make

cd ../katapult/scripts/
./flash_can.py -i can0 -f ~/klipper/out/klipper.bin -u 1d8516137409

Firmware Update - BTT-Eddy-usb

cd ~/klipper
make clean

cp _config.BTT-Eddy .config
make

make flash FLASH_DEVICE=2e8a:0003

Firmware Update - BTT-Eddy-usb

cd ~/klipper
make clean

cp _config.BTT-SKR-Mini-E3-v3 .config
make flash FLASH_DEVICE=/dev/serial/by-id/usb-Klipper_stm32g0b1xx_1600120012504B5735313920-if00 
  #
  # NOTE: may output an error

# check that mcu is in DFU mode
lsusb | grep DFU
  #
  # expecting:
  # > Bus 003 Device 090: ID 0483:df11 STMicroelectronics STM Device in DFU Mode

# attempt flash with USB "vendor:device"
make flash FLASH_DEVICE=0483:df11

ls -hFl /dev/serial/by-id/*Klipper_stm32g0b1*
  #
  # expecting:
  # > /dev/serial/by-id/usb-Klipper_stm32g0b1xx_1600120012504B5735313920-if00 -> ../../ttyACM3