[syzbot] KASAN: use-after-free Write in h4_recv_buf #3
Comments
BluezTestBot
pushed a commit
that referenced
this issue
Jun 30, 2021
Ling Pei Lee says: ==================== tmmac: Add option to enable PHY WOL with PMT enabled This patchset main objective is to provide an option to enable PHY WoL even the PMT is enabled by default in the HW features. The current stmmac driver WOL implementation will enable MAC WOL if MAC HW PMT feature is on. Else, the driver will check for PHY WOL support. Intel EHL mgbe are designed to wake up through PHY WOL although the HW PMT is enabled.Hence, introduced use_phy_wol platform data to provide this PHY WOL option. Set use_phy_wol will disable the plat->pmt which currently used to determine the system to wake up by MAC WOL or PHY WOL. This WOL patchset includes of setting the device power state to D3hot. This is because the EHL PSE will need to PSE mgbe to be in D3 state in order for the PSE to goes into suspend mode. Change Log: V2: Drop Patch #3 net: stmmac: Reconfigure the PHY WOL settings in stmmac_resume(). ====================
BluezTestBot
pushed a commit
that referenced
this issue
Nov 16, 2021
A race condition is triggered when usermode control is given to userspace before the kernel's MSFT query responds, resulting in an unexpected response to userspace's reset command. Issue can be observed in btmon: < HCI Command: Vendor (0x3f|0x001e) plen 2 #3 [hci0] 05 01 .. @ USER Open: bt_stack_manage (privileged) version 2.22 {0x0002} [hci0] < HCI Command: Reset (0x03|0x0003) plen 0 #4 [hci0] > HCI Event: Command Complete (0x0e) plen 5 #5 [hci0] Vendor (0x3f|0x001e) ncmd 1 Status: Command Disallowed (0x0c) 05 . > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] Reset (0x03|0x0003) ncmd 2 Status: Success (0x00) Reviewed-by: Abhishek Pandit-Subedi <[email protected]> Reviewed-by: Sonny Sasaka <[email protected]> Signed-off-by: Jesse Melhuish <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Nov 24, 2021
Add a convenience function, folio_inode() that will get the host inode from a folio's mapping. Changes: ver #3: - Fix mistake in function description[2]. ver #2: - Fix contradiction between doc and implementation by disallowing use with swap caches[1]. Signed-off-by: David Howells <[email protected]> Reviewed-by: Matthew Wilcox (Oracle) <[email protected]> Tested-by: Jeff Layton <[email protected]> Tested-by: Dominique Martinet <[email protected]> Tested-by: [email protected] Link: https://lore.kernel.org/r/[email protected]/ [1] Link: https://lore.kernel.org/r/[email protected]/ [2] Link: https://lore.kernel.org/r/162880453171.3369675.3704943108660112470.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/162981151155.1901565.7010079316994382707.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/163005744370.2472992.18324470937328925723.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163584184628.4023316.9386282630968981869.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/163649325519.309189.15072332908703129455.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/163657850401.834781.1031963517399283294.stgit@warthog.procyon.org.uk/ # v5
BluezTestBot
pushed a commit
that referenced
this issue
Nov 24, 2021
The exit function fixes a memory leak with the src field as detected by
leak sanitizer. An example of which is:
Indirect leak of 25133184 byte(s) in 207 object(s) allocated from:
#0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803
#2 0x55defe6397e4 in symbol__hists util/annotate.c:952
#3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968
#4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119
#5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182
#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236
#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315
#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473
#9 0x55defe731e38 in machines__deliver_event util/session.c:1510
#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590
#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183
#12 0x55defe740082 in do_flush util/ordered-events.c:244
#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323
#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341
#15 0x55defe73837f in __perf_session__process_events util/session.c:2390
#16 0x55defe7385ff in perf_session__process_events util/session.c:2420
...
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Namhyung Kim <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin Liška <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Nov 24, 2021
Often some test cases like btrfs/161 trigger lockdep splats that complain about possible unsafe lock scenario due to the fact that during mount, when reading the chunk tree we end up calling blkdev_get_by_path() while holding a read lock on a leaf of the chunk tree. That produces a lockdep splat like the following: [ 3653.683975] ====================================================== [ 3653.685148] WARNING: possible circular locking dependency detected [ 3653.686301] 5.15.0-rc7-btrfs-next-103 #1 Not tainted [ 3653.687239] ------------------------------------------------------ [ 3653.688400] mount/447465 is trying to acquire lock: [ 3653.689320] ffff8c6b0c76e528 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.691054] but task is already holding lock: [ 3653.692155] ffff8c6b0a9f39e0 (btrfs-chunk-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 3653.693978] which lock already depends on the new lock. [ 3653.695510] the existing dependency chain (in reverse order) is: [ 3653.696915] -> #3 (btrfs-chunk-00){++++}-{3:3}: [ 3653.698053] down_read_nested+0x4b/0x140 [ 3653.698893] __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 3653.699988] btrfs_read_lock_root_node+0x31/0x40 [btrfs] [ 3653.701205] btrfs_search_slot+0x537/0xc00 [btrfs] [ 3653.702234] btrfs_insert_empty_items+0x32/0x70 [btrfs] [ 3653.703332] btrfs_init_new_device+0x563/0x15b0 [btrfs] [ 3653.704439] btrfs_ioctl+0x2110/0x3530 [btrfs] [ 3653.705405] __x64_sys_ioctl+0x83/0xb0 [ 3653.706215] do_syscall_64+0x3b/0xc0 [ 3653.706990] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.708040] -> #2 (sb_internal#2){.+.+}-{0:0}: [ 3653.708994] lock_release+0x13d/0x4a0 [ 3653.709533] up_write+0x18/0x160 [ 3653.710017] btrfs_sync_file+0x3f3/0x5b0 [btrfs] [ 3653.710699] __loop_update_dio+0xbd/0x170 [loop] [ 3653.711360] lo_ioctl+0x3b1/0x8a0 [loop] [ 3653.711929] block_ioctl+0x48/0x50 [ 3653.712442] __x64_sys_ioctl+0x83/0xb0 [ 3653.712991] do_syscall_64+0x3b/0xc0 [ 3653.713519] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.714233] -> #1 (&lo->lo_mutex){+.+.}-{3:3}: [ 3653.715026] __mutex_lock+0x92/0x900 [ 3653.715648] lo_open+0x28/0x60 [loop] [ 3653.716275] blkdev_get_whole+0x28/0x90 [ 3653.716867] blkdev_get_by_dev.part.0+0x142/0x320 [ 3653.717537] blkdev_open+0x5e/0xa0 [ 3653.718043] do_dentry_open+0x163/0x390 [ 3653.718604] path_openat+0x3f0/0xa80 [ 3653.719128] do_filp_open+0xa9/0x150 [ 3653.719652] do_sys_openat2+0x97/0x160 [ 3653.720197] __x64_sys_openat+0x54/0x90 [ 3653.720766] do_syscall_64+0x3b/0xc0 [ 3653.721285] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.721986] -> #0 (&disk->open_mutex){+.+.}-{3:3}: [ 3653.722775] __lock_acquire+0x130e/0x2210 [ 3653.723348] lock_acquire+0xd7/0x310 [ 3653.723867] __mutex_lock+0x92/0x900 [ 3653.724394] blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.725041] blkdev_get_by_path+0xb8/0xd0 [ 3653.725614] btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs] [ 3653.726332] open_fs_devices+0xd7/0x2c0 [btrfs] [ 3653.726999] btrfs_read_chunk_tree+0x3ad/0x870 [btrfs] [ 3653.727739] open_ctree+0xb8e/0x17bf [btrfs] [ 3653.728384] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 3653.729130] legacy_get_tree+0x30/0x50 [ 3653.729676] vfs_get_tree+0x28/0xc0 [ 3653.730192] vfs_kern_mount.part.0+0x71/0xb0 [ 3653.730800] btrfs_mount+0x11d/0x3a0 [btrfs] [ 3653.731427] legacy_get_tree+0x30/0x50 [ 3653.731970] vfs_get_tree+0x28/0xc0 [ 3653.732486] path_mount+0x2d4/0xbe0 [ 3653.732997] __x64_sys_mount+0x103/0x140 [ 3653.733560] do_syscall_64+0x3b/0xc0 [ 3653.734080] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.734782] other info that might help us debug this: [ 3653.735784] Chain exists of: &disk->open_mutex --> sb_internal#2 --> btrfs-chunk-00 [ 3653.737123] Possible unsafe locking scenario: [ 3653.737865] CPU0 CPU1 [ 3653.738435] ---- ---- [ 3653.739007] lock(btrfs-chunk-00); [ 3653.739449] lock(sb_internal#2); [ 3653.740193] lock(btrfs-chunk-00); [ 3653.740955] lock(&disk->open_mutex); [ 3653.741431] *** DEADLOCK *** [ 3653.742176] 3 locks held by mount/447465: [ 3653.742739] #0: ffff8c6acf85c0e8 (&type->s_umount_key#44/1){+.+.}-{3:3}, at: alloc_super+0xd5/0x3b0 [ 3653.744114] #1: ffffffffc0b28f70 (uuid_mutex){+.+.}-{3:3}, at: btrfs_read_chunk_tree+0x59/0x870 [btrfs] [ 3653.745563] #2: ffff8c6b0a9f39e0 (btrfs-chunk-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x24/0x110 [btrfs] [ 3653.747066] stack backtrace: [ 3653.747723] CPU: 4 PID: 447465 Comm: mount Not tainted 5.15.0-rc7-btrfs-next-103 #1 [ 3653.748873] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 3653.750592] Call Trace: [ 3653.750967] dump_stack_lvl+0x57/0x72 [ 3653.751526] check_noncircular+0xf3/0x110 [ 3653.752136] ? stack_trace_save+0x4b/0x70 [ 3653.752748] __lock_acquire+0x130e/0x2210 [ 3653.753356] lock_acquire+0xd7/0x310 [ 3653.753898] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.754596] ? lock_is_held_type+0xe8/0x140 [ 3653.755125] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.755729] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.756338] __mutex_lock+0x92/0x900 [ 3653.756794] ? blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.757400] ? do_raw_spin_unlock+0x4b/0xa0 [ 3653.757930] ? _raw_spin_unlock+0x29/0x40 [ 3653.758437] ? bd_prepare_to_claim+0x129/0x150 [ 3653.758999] ? trace_module_get+0x2b/0xd0 [ 3653.759508] ? try_module_get.part.0+0x50/0x80 [ 3653.760072] blkdev_get_by_dev.part.0+0xe7/0x320 [ 3653.760661] ? devcgroup_check_permission+0xc1/0x1f0 [ 3653.761288] blkdev_get_by_path+0xb8/0xd0 [ 3653.761797] btrfs_get_bdev_and_sb+0x1b/0xb0 [btrfs] [ 3653.762454] open_fs_devices+0xd7/0x2c0 [btrfs] [ 3653.763055] ? clone_fs_devices+0x8f/0x170 [btrfs] [ 3653.763689] btrfs_read_chunk_tree+0x3ad/0x870 [btrfs] [ 3653.764370] ? kvm_sched_clock_read+0x14/0x40 [ 3653.764922] open_ctree+0xb8e/0x17bf [btrfs] [ 3653.765493] ? super_setup_bdi_name+0x79/0xd0 [ 3653.766043] btrfs_mount_root.cold+0x12/0xde [btrfs] [ 3653.766780] ? rcu_read_lock_sched_held+0x3f/0x80 [ 3653.767488] ? kfree+0x1f2/0x3c0 [ 3653.767979] legacy_get_tree+0x30/0x50 [ 3653.768548] vfs_get_tree+0x28/0xc0 [ 3653.769076] vfs_kern_mount.part.0+0x71/0xb0 [ 3653.769718] btrfs_mount+0x11d/0x3a0 [btrfs] [ 3653.770381] ? rcu_read_lock_sched_held+0x3f/0x80 [ 3653.771086] ? kfree+0x1f2/0x3c0 [ 3653.771574] legacy_get_tree+0x30/0x50 [ 3653.772136] vfs_get_tree+0x28/0xc0 [ 3653.772673] path_mount+0x2d4/0xbe0 [ 3653.773201] __x64_sys_mount+0x103/0x140 [ 3653.773793] do_syscall_64+0x3b/0xc0 [ 3653.774333] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3653.775094] RIP: 0033:0x7f648bc45aaa This happens because through btrfs_read_chunk_tree(), which is called only during mount, ends up acquiring the mutex open_mutex of a block device while holding a read lock on a leaf of the chunk tree while other paths need to acquire other locks before locking extent buffers of the chunk tree. Since at mount time when we call btrfs_read_chunk_tree() we know that we don't have other tasks running in parallel and modifying the chunk tree, we can simply skip locking of chunk tree extent buffers. So do that and move the assertion that checks the fs is not yet mounted to the top block of btrfs_read_chunk_tree(), with a comment before doing it. Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jan 31, 2022
Tony Lu says:
====================
net/smc: Improvements for TCP_CORK and sendfile()
Currently, SMC use default implement for syscall sendfile() [1], which
is wildly used in nginx and big data sences. Usually, applications use
sendfile() with TCP_CORK:
fstat(20, {st_mode=S_IFREG|0644, st_size=4096, ...}) = 0
setsockopt(19, SOL_TCP, TCP_CORK, [1], 4) = 0
writev(19, [{iov_base="HTTP/1.1 200 OK\r\nServer: nginx/1"..., iov_len=240}], 1) = 240
sendfile(19, 20, [0] => [4096], 4096) = 4096
close(20) = 0
setsockopt(19, SOL_TCP, TCP_CORK, [0], 4) = 0
The above is an example of Nginx, when sendfile() on, Nginx first
enables TCP_CORK, write headers, the data will not be sent. Then call
sendfile(), it reads file and write to sndbuf. When TCP_CORK is cleared,
all pending data is sent out.
The performance of the default implement of sendfile is lower than when
it is off. After investigation, it shows two parts to improve:
- unnecessary lock contention of delayed work
- less data per send than when sendfile off
Patch #1 tries to reduce lock_sock() contention in smc_tx_work().
Patch #2 removes timed work for corking, and let applications control
it. See TCP_CORK [2] MSG_MORE [3].
Patch #3 adds MSG_SENDPAGE_NOTLAST for corking more data when
sendfile().
Test environments:
- CPU Intel Xeon Platinum 8 core, mem 32 GiB, nic Mellanox CX4
- socket sndbuf / rcvbuf: 16384 / 131072 bytes
- server: smc_run nginx
- client: smc_run ./wrk -c 100 -t 2 -d 30 http://192.168.100.1:8080/4k.html
- payload: 4KB local disk file
Items QPS
sendfile off 272477.10
sendfile on (orig) 223622.79
sendfile on (this) 395847.21
This benchmark shows +45.28% improvement compared with sendfile off, and
+77.02% compared with original sendfile implement.
[1] https://man7.org/linux/man-pages/man2/sendfile.2.html
[2] https://linux.die.net/man/7/tcp
[3] https://man7.org/linux/man-pages/man2/send.2.html
====================
Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 5, 2022
netfs has a number of lists of symbols for use in tracing, listed in an enum and then listed again in a symbol->string mapping for use with __print_symbolic(). This is, however, redundant. Instead, use the symbol->string mapping list to also generate the enum where the enum is in the same file. Changes ======= ver #3) - #undef EM and E_ at the end of the trace file[1]. Signed-off-by: David Howells <[email protected]> Acked-by: Jeff Layton <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/[email protected]/ [1] Link: https://lore.kernel.org/r/164622980839.3564931.5673300162465266909.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678192454.1200972.4428834328108580460.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/CALF+zOkB38_MB5QwNUtqTU4WjMaLUJ5+Piwsn3pMxkO3d4J7Kg@mail.gmail.com/ # v2 Link: https://lore.kernel.org/r/164692890614.2099075.12960653141802151575.stgit@warthog.procyon.org.uk/ # v3
BluezTestBot
pushed a commit
that referenced
this issue
Apr 5, 2022
Add refcount tracing for the netfs_io_request structure. Changes ======= ver #3) - Switch 'W=' to 'R=' in the traceline to match other request debug IDs. Signed-off-by: David Howells <[email protected]> Reviewed-by: Jeff Layton <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/164622997668.3564931.14456171619219324968.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678200943.1200972.7241495532327787765.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692900920.2099075.11847712419940675791.stgit@warthog.procyon.org.uk/ # v3
BluezTestBot
pushed a commit
that referenced
this issue
Apr 5, 2022
Add refcount tracing for the netfs_io_subrequest structure. Changes ======= ver #3) - Switch 'W=' to 'R=' in the traceline to match other request debug IDs. Signed-off-by: David Howells <[email protected]> Reviewed-by: Jeff Layton <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/164622998584.3564931.5052255990645723639.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678202603.1200972.14726007419792315578.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692901860.2099075.4845820886851239935.stgit@warthog.procyon.org.uk/ # v3
BluezTestBot
pushed a commit
that referenced
this issue
Apr 5, 2022
Pass start and len to the rreq allocator. This should ensure that the fields are set so that ->init_request() can use them. Also add a parameter to indicates the origin of the request. Ceph can use this to tell whether to get caps. Changes ======= ver #3) - Change the author to me as Jeff feels that most of the patch is my changes now. ver #2) - Show the request origin in the netfs_rreq tracepoint. Signed-off-by: Jeff Layton <[email protected]> Co-developed-by: David Howells <[email protected]> Signed-off-by: David Howells <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/164622989020.3564931.17517006047854958747.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678208569.1200972.12153682697842916557.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692904155.2099075.14717645623034355995.stgit@warthog.procyon.org.uk/ # v3
BluezTestBot
pushed a commit
that referenced
this issue
Apr 5, 2022
Move the caps check from ceph_readahead() to ceph_init_request(), conditional on the origin being NETFS_READAHEAD so that in a future patch, ceph can point its ->readahead() vector directly at netfs_readahead(). Changes ======= ver #4) - Move the check for NETFS_READAHEAD up in ceph_init_request()[2]. ver #3) - Split from the patch to add a netfs inode context[1]. - Need to store the caps got in rreq->netfs_priv for later freeing. Signed-off-by: David Howells <[email protected]> cc: [email protected] cc: [email protected] Link: https://lore.kernel.org/r/[email protected]/ [1] Link: https://lore.kernel.org/r/[email protected]/ [2] Link: https://lore.kernel.org/r/164692907694.2099075.10081819855690054094.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/[email protected]/ # v4
BluezTestBot
pushed a commit
that referenced
this issue
Apr 5, 2022
Add a netfs_i_context struct that should be included in the network
filesystem's own inode struct wrapper, directly after the VFS's inode
struct, e.g.:
struct my_inode {
struct {
/* These must be contiguous */
struct inode vfs_inode;
struct netfs_i_context netfs_ctx;
};
};
The netfs_i_context struct so far contains a single field for the network
filesystem to use - the cache cookie:
struct netfs_i_context {
...
struct fscache_cookie *cache;
};
Three functions are provided to help with this:
(1) void netfs_i_context_init(struct inode *inode,
const struct netfs_request_ops *ops);
Initialise the netfs context and set the operations.
(2) struct netfs_i_context *netfs_i_context(struct inode *inode);
Find the netfs context from the VFS inode.
(3) struct inode *netfs_inode(struct netfs_i_context *ctx);
Find the VFS inode from the netfs context.
Changes
=======
ver #4)
- Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a
cache is present[3].
- Fix netfs_skip_folio_read() to zero out all of the page, not just some
of it[3].
ver #3)
- Split out the bit to move ceph cap-getting on readahead into
ceph_init_request()[1].
- Stick in a comment to the netfs inode structs indicating the contiguity
requirements[2].
ver #2)
- Adjust documentation to match.
- Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef".
- Move the cap check from ceph_readahead() to ceph_init_request() to be
called from netfslib.
- Remove ceph_readahead() and use netfs_readahead() directly instead.
Signed-off-by: David Howells <[email protected]>
Acked-by: Jeff Layton <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]/ [2]
Link: https://lore.kernel.org/r/[email protected]/ [3]
Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/[email protected]/ # v4
BluezTestBot
pushed a commit
that referenced
this issue
Apr 5, 2022
The io-specific memcpy/memset functions use string mmio accesses to do their work. Under SEV, the hypervisor can't emulate these instructions because they read/write directly from/to encrypted memory. KVM will inject a page fault exception into the guest when it is asked to emulate string mmio instructions for an SEV guest: BUG: unable to handle page fault for address: ffffc90000065068 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000100000067 P4D 8000100000067 PUD 80001000fb067 PMD 80001000fc067 PTE 80000000fed40173 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc7 #3 As string mmio for an SEV guest can not be supported by the hypervisor, unroll the instructions for CC_ATTR_GUEST_UNROLL_STRING_IO enabled kernels. This issue appears when kernels are launched in recent libvirt-managed SEV virtual machines, because virt-install started to add a tpm-crb device to the guest by default and proactively because, raisins: virt-manager/virt-manager@eb58c09 and as that commit says, the default adding of a TPM can be disabled with "virt-install ... --tpm none". The kernel driver for tpm-crb uses memcpy_to/from_io() functions to access MMIO memory, resulting in a page-fault injected by KVM and crashing the kernel at boot. [ bp: Massage and extend commit message. ] Fixes: d8aa7ee ('x86/mm: Add Secure Encrypted Virtualization (SEV) support') Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Tom Lendacky <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected]
BluezTestBot
pushed a commit
that referenced
this issue
Apr 5, 2022
We've got a mess on our hands. 1. xfs_trans_commit() cannot cancel transactions because the mount is shut down - that causes dirty, aborted, unlogged log items to sit unpinned in memory and potentially get written to disk before the log is shut down. Hence xfs_trans_commit() can only abort transactions when xlog_is_shutdown() is true. 2. xfs_force_shutdown() is used in places to cause the current modification to be aborted via xfs_trans_commit() because it may be impractical or impossible to cancel the transaction directly, and hence xfs_trans_commit() must cancel transactions when xfs_is_shutdown() is true in this situation. But we can't do that because of #1. 3. Log IO errors cause log shutdowns by calling xfs_force_shutdown() to shut down the mount and then the log from log IO completion. 4. xfs_force_shutdown() can result in a log force being issued, which has to wait for log IO completion before it will mark the log as shut down. If #3 races with some other shutdown trigger that runs a log force, we rely on xfs_force_shutdown() silently ignoring #3 and avoiding shutting down the log until the failed log force completes. 5. To ensure #2 always works, we have to ensure that xfs_force_shutdown() does not return until the the log is shut down. But in the case of #4, this will result in a deadlock because the log Io completion will block waiting for a log force to complete which is blocked waiting for log IO to complete.... So the very first thing we have to do here to untangle this mess is dissociate log shutdown triggers from mount shutdowns. We already have xlog_forced_shutdown, which will atomically transistion to the log a shutdown state. Due to internal asserts it cannot be called multiple times, but was done simply because the only place that could call it was xfs_do_force_shutdown() (i.e. the mount shutdown!) and that could only call it once and once only. So the first thing we do is remove the asserts. We then convert all the internal log shutdown triggers to call xlog_force_shutdown() directly instead of xfs_force_shutdown(). This allows the log shutdown triggers to shut down the log without needing to care about mount based shutdown constraints. This means we shut down the log independently of the mount and the mount may not notice this until it's next attempt to read or modify metadata. At that point (e.g. xfs_trans_commit()) it will see that the log is shutdown, error out and shutdown the mount. To ensure that all the unmount behaviours and asserts track correctly as a result of a log shutdown, propagate the shutdown up to the mount if it is not already set. This keeps the mount and log state in sync, and saves a huge amount of hassle where code fails because of a log shutdown but only checks for mount shutdowns and hence ends up doing the wrong thing. Cleaning up that mess is an exercise for another day. This enables us to address the other problems noted above in followup patches. Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 5, 2022
As guest_irq is coming from KVM_IRQFD API call, it may trigger crash in svm_update_pi_irte() due to out-of-bounds: crash> bt PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8" #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51 #6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace [exception RIP: svm_update_pi_irte+227] RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086 RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001 RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8 RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200 R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm] #8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm] #9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm] RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020 RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0 R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0 R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0 ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b Vmx have been fix this in commit 3a8b067 (KVM: VMX: Do not BUG() on out-of-bounds guest IRQ), so we can just copy source from that to fix this. Co-developed-by: Yi Liu <[email protected]> Signed-off-by: Yi Liu <[email protected]> Signed-off-by: Yi Wang <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 15, 2022
…e_zone
btrfs_can_activate_zone() can be called with the device_list_mutex already
held, which will lead to a deadlock:
insert_dev_extents() // Takes device_list_mutex
`-> insert_dev_extent()
`-> btrfs_insert_empty_item()
`-> btrfs_insert_empty_items()
`-> btrfs_search_slot()
`-> btrfs_cow_block()
`-> __btrfs_cow_block()
`-> btrfs_alloc_tree_block()
`-> btrfs_reserve_extent()
`-> find_free_extent()
`-> find_free_extent_update_loop()
`-> can_allocate_chunk()
`-> btrfs_can_activate_zone() // Takes device_list_mutex again
Instead of using the RCU on fs_devices->device_list we
can use fs_devices->alloc_list, protected by the chunk_mutex to traverse
the list of active devices.
We are in the chunk allocation thread. The newer chunk allocation
happens from the devices in the fs_device->alloc_list protected by the
chunk_mutex.
btrfs_create_chunk()
lockdep_assert_held(&info->chunk_mutex);
gather_device_info
list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list)
Also, a device that reappears after the mount won't join the alloc_list
yet and, it will be in the dev_list, which we don't want to consider in
the context of the chunk alloc.
[15.166572] WARNING: possible recursive locking detected
[15.167117] 5.17.0-rc6-dennis #79 Not tainted
[15.167487] --------------------------------------------
[15.167733] kworker/u8:3/146 is trying to acquire lock:
[15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: find_free_extent+0x15a/0x14f0 [btrfs]
[15.167733]
[15.167733] but task is already holding lock:
[15.167733] ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs]
[15.167733]
[15.167733] other info that might help us debug this:
[15.167733] Possible unsafe locking scenario:
[15.167733]
[15.171834] CPU0
[15.171834] ----
[15.171834] lock(&fs_devs->device_list_mutex);
[15.171834] lock(&fs_devs->device_list_mutex);
[15.171834]
[15.171834] *** DEADLOCK ***
[15.171834]
[15.171834] May be due to missing lock nesting notation
[15.171834]
[15.171834] 5 locks held by kworker/u8:3/146:
[15.171834] #0: ffff888100050938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0
[15.171834] #1: ffffc9000067be80 ((work_completion)(&fs_info->async_data_reclaim_work)){+.+.}-{0:0}, at: process_one_work+0x1c3/0x5a0
[15.176244] #2: ffff88810521e620 (sb_internal){.+.+}-{0:0}, at: flush_space+0x335/0x600 [btrfs]
[15.176244] #3: ffff888102962ee0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_create_pending_block_groups+0x20a/0x560 [btrfs]
[15.176244] #4: ffff8881152e4b78 (btrfs-dev-00){++++}-{3:3}, at: __btrfs_tree_lock+0x27/0x130 [btrfs]
[15.179641]
[15.179641] stack backtrace:
[15.179641] CPU: 1 PID: 146 Comm: kworker/u8:3 Not tainted 5.17.0-rc6-dennis #79
[15.179641] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1.fc35 04/01/2014
[15.179641] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
[15.179641] Call Trace:
[15.179641] <TASK>
[15.179641] dump_stack_lvl+0x45/0x59
[15.179641] __lock_acquire.cold+0x217/0x2b2
[15.179641] lock_acquire+0xbf/0x2b0
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] __mutex_lock+0x8e/0x970
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] ? lock_is_held_type+0xd7/0x130
[15.183838] ? find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] find_free_extent+0x15a/0x14f0 [btrfs]
[15.183838] ? _raw_spin_unlock+0x24/0x40
[15.183838] ? btrfs_get_alloc_profile+0x106/0x230 [btrfs]
[15.187601] btrfs_reserve_extent+0x131/0x260 [btrfs]
[15.187601] btrfs_alloc_tree_block+0xb5/0x3b0 [btrfs]
[15.187601] __btrfs_cow_block+0x138/0x600 [btrfs]
[15.187601] btrfs_cow_block+0x10f/0x230 [btrfs]
[15.187601] btrfs_search_slot+0x55f/0xbc0 [btrfs]
[15.187601] ? lock_is_held_type+0xd7/0x130
[15.187601] btrfs_insert_empty_items+0x2d/0x60 [btrfs]
[15.187601] btrfs_create_pending_block_groups+0x2b3/0x560 [btrfs]
[15.187601] __btrfs_end_transaction+0x36/0x2a0 [btrfs]
[15.192037] flush_space+0x374/0x600 [btrfs]
[15.192037] ? find_held_lock+0x2b/0x80
[15.192037] ? btrfs_async_reclaim_data_space+0x49/0x180 [btrfs]
[15.192037] ? lock_release+0x131/0x2b0
[15.192037] btrfs_async_reclaim_data_space+0x70/0x180 [btrfs]
[15.192037] process_one_work+0x24c/0x5a0
[15.192037] worker_thread+0x4a/0x3d0
Fixes: a85f05e ("btrfs: zoned: avoid chunk allocation if active block group has enough space")
CC: [email protected] # 5.16+
Reviewed-by: Anand Jain <[email protected]>
Signed-off-by: Johannes Thumshirn <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 15, 2022
Andrii Nakryiko says: ==================== Add libbpf support for USDT (User Statically-Defined Tracing) probes. USDTs is important part of tracing, and BPF, ecosystem, widely used in mission-critical production applications for observability, performance analysis, and debugging. And while USDTs themselves are pretty complicated abstraction built on top of uprobes, for end-users USDT is as natural a primitive as uprobes themselves. And thus it's important for libbpf to provide best possible user experience when it comes to build tracing applications relying on USDTs. USDTs historically presented a lot of challenges for libbpf's no compilation-on-the-fly general approach to BPF tracing. BCC utilizes power of on-the-fly source code generation and compilation using its embedded Clang toolchain, which was impractical for more lightweight and thus more rigid libbpf-based approach. But still, with enough diligence and BPF cookies it's possible to implement USDT support that feels as natural as tracing any uprobe. This patch set is the culmination of such effort to add libbpf USDT support following the spirit and philosophy of BPF CO-RE (even though it's not inherently relying on BPF CO-RE much, see patch #1 for some notes regarding this). Each respective patch has enough details and explanations, so I won't go into details here. In the end, I think the overall usability of libbpf's USDT support *exceeds* the status quo set by BCC due to the elimination of awkward runtime USDT supporting code generation. It also exceeds BCC's capabilities due to the use of BPF cookie. This eliminates the need to determine a USDT call site (and thus specifics about how exactly to fetch arguments) based on its *absolute IP address*, which is impossible with shared libraries if no PID is specified (as we then just *can't* know absolute IP at which shared library is loaded, because it might be different for each process). With BPF cookie this is not a problem as we record "call site ID" directly in a BPF cookie value. This makes it possible to do a system-wide tracing of a USDT defined in a shared library. Think about tracing some USDT in libc across any process in the system, both running at the time of attachment and all the new processes started *afterwards*. This is a very powerful capability that allows more efficient observability and tracing tooling. Once this functionality lands, the plan is to extend libbpf-bootstrap ([0]) with an USDT example. It will also become possible to start converting BCC tools that rely on USDTs to their libbpf-based counterparts ([1]). It's worth noting that preliminary version of this code was currently used and tested in production code running fleet-wide observability toolkit. Libbpf functionality is broken down into 5 mostly logically independent parts, for ease of reviewing: - patch #1 adds BPF-side implementation; - patch #2 adds user-space APIs and wires bpf_link for USDTs; - patch #3 adds the most mundate pieces: handling ELF, parsing USDT notes, dealing with memory segments, relative vs absolute addresses, etc; - patch #4 adds internal ID allocation and setting up/tearing down of BPF-side state (spec and IP-to-ID mapping); - patch #5 implements x86/x86-64-specific logic of parsing USDT argument specifications; - patch #6 adds testing of various basic aspects of handling of USDT; - patch #7 extends the set of tests with more combinations of semaphore, executable vs shared library, and PID filter options. [0] https://github.com/libbpf/libbpf-bootstrap [1] https://github.com/iovisor/bcc/tree/master/libbpf-tools v2->v3: - fix typos, leave link to systemtap doc, acks, etc (Dave); - include sys/sdt.h to avoid extra system-wide package dependencies; v1->v2: - huge high-level comment describing how all the moving parts fit together (Alan, Alexei); - switched from `__hidden __weak` to `static inline __noinline` for now, as there is a bug in BPF linker breaking final BPF object file due to invalid .BTF.ext data; I want to fix it separately at which point I'll switch back to __hidden __weak again. The fix isn't trivial, so I don't want to block on that. Same for __weak variable lookup bug that Henqi reported. - various fixes and improvements, addressing other feedback (Alan, Hengqi); Cc: Alan Maguire <[email protected]> Cc: Dave Marchevsky <[email protected]> Cc: Hengqi Chen <[email protected]> ==================== Signed-off-by: Alexei Starovoitov <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 15, 2022
Ido Schimmel says: ==================== net/sched: Better error reporting for offload failures This patchset improves error reporting to user space when offload fails during the flow action setup phase. That is, when failures occur in the actions themselves, even before calling device drivers. Requested / reported in [1]. This is done by passing extack to the offload_act_setup() callback and making use of it in the various actions. Patches #1-#2 change matchall and flower to log error messages to user space in accordance with the verbose flag. Patch #3 passes extack to the offload_act_setup() callback from the various call sites, including matchall and flower. Patches #4-#11 make use of extack in the various actions to report offload failures. Patch #12 adds an error message when the action does not support offload at all. Patches #13-#14 change matchall and flower to stop overwriting more specific error messages. [1] https://lore.kernel.org/netdev/20220317185249.5mff5u2x624pjewv@skbuf/ ==================== Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 15, 2022
…e name Add prefix "lc#n" to thermal zones associated with the thermal objects found on line cards. For example thermal zone for module #9 located at line card #7 will have type: mlxsw-lc7-module9. And thermal zone for gearbox #3 located at line card #5 will have type: mlxsw-lc5-gearbox3. Signed-off-by: Vadim Pasternak <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 15, 2022
Ido Schimmel says: ==================== mlxsw: Preparations for line cards support Currently, mlxsw registers thermal zones as well as hwmon entries for objects such as transceiver modules and gearboxes. In upcoming modular systems, these objects are no longer found on the main board (i.e., slot 0), but on plug-able line cards. This patchset prepares mlxsw for such systems in terms of hwmon, thermal and cable access support. Patches #1-#3 gradually prepare mlxsw for transceiver modules access support for line cards by splitting some of the internal structures and some APIs. Patches #4-#5 gradually prepare mlxsw for hwmon support for line cards by splitting some of the internal structures and augmenting them with a slot index. Patches #6-#7 do the same for thermal zones. Patch #8 selects cooling device for binding to a thermal zone by exact name match to prevent binding to non-relevant devices. Patch #9 replaces internal define for thermal zone name length with a common define. ==================== Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 21, 2022
…-initialization Add callback functions for line card 'hwmon' initialization and de-initialization. Each line card is associated with the relevant 'hwmon' device, which may contain thermal attributes for the cages and gearboxes found on this line card. The line card 'hwmon' initialization / de-initialization APIs are to be called when line card is set to active / inactive state by got_active() / got_inactive() callbacks from line card state machine. For example cage temperature for module #9 located at line card #7 will be exposed by utility 'sensors' like: linecard#07 front panel 009: +32.0C (crit = +70.0C, emerg = +80.0C) And temperature for gearbox #3 located at line card #5 will be exposed like: linecard#05 gearbox 003: +41.0C (highest = +41.0C) Signed-off-by: Vadim Pasternak <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 21, 2022
Ido Schimmel says: ==================== mlxsw: Line cards status tracking When a line card is provisioned, netdevs corresponding to the ports found on the line card are registered. User space can then perform various logical configurations (e.g., splitting, setting MTU) on these netdevs. However, since the line card is not present / powered on (i.e., it is not in 'active' state), user space cannot access the various components found on the line card. For example, user space cannot read the temperature of gearboxes or transceiver modules found on the line card via hwmon / thermal. Similarly, it cannot dump the EEPROM contents of these transceiver modules. The above is only possible when the line card becomes active. This patchset solves the problem by tracking the status of each line card and invoking callbacks from interested parties when a line card becomes active / inactive. Patchset overview: Patch #1 adds the infrastructure in the line cards core that allows users to registers a set of callbacks that are invoked when a line card becomes active / inactive. To avoid races, if a line card is already active during registration, the got_active() callback is invoked. Patches #2-#3 are preparations. Patch #4 changes the port module core to register a set of callbacks with the line cards core. See detailed description with examples in the commit message. Patches #5-#6 do the same with regards to thermal / hwmon support, so that user space will be able to monitor the temperature of various components on the line card when it becomes active. ==================== Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 25, 2022
There is possible circular locking dependency detected on event_mutex
(see below logs). This is due to set fail safe mode is done at
dp_panel_read_sink_caps() within event_mutex scope. To break this
possible circular locking, this patch move setting fail safe mode
out of event_mutex scope.
[ 23.958078] ======================================================
[ 23.964430] WARNING: possible circular locking dependency detected
[ 23.970777] 5.17.0-rc2-lockdep-00088-g05241de1f69e #148 Not tainted
[ 23.977219] ------------------------------------------------------
[ 23.983570] DrmThread/1574 is trying to acquire lock:
[ 23.988763] ffffff808423aab0 (&dp->event_mutex){+.+.}-{3:3}, at: msm_dp_displ ay_enable+0x58/0x164
[ 23.997895]
[ 23.997895] but task is already holding lock:
[ 24.003895] ffffff808420b280 (&kms->commit_lock[i]/1){+.+.}-{3:3}, at: lock_c rtcs+0x80/0x8c
[ 24.012495]
[ 24.012495] which lock already depends on the new lock.
[ 24.012495]
[ 24.020886]
[ 24.020886] the existing dependency chain (in reverse order) is:
[ 24.028570]
[ 24.028570] -> #5 (&kms->commit_lock[i]/1){+.+.}-{3:3}:
[ 24.035472] __mutex_lock+0xc8/0x384
[ 24.039695] mutex_lock_nested+0x54/0x74
[ 24.044272] lock_crtcs+0x80/0x8c
[ 24.048222] msm_atomic_commit_tail+0x1e8/0x3d0
[ 24.053413] commit_tail+0x7c/0xfc
[ 24.057452] drm_atomic_helper_commit+0x158/0x15c
[ 24.062826] drm_atomic_commit+0x60/0x74
[ 24.067403] drm_mode_atomic_ioctl+0x6b0/0x908
[ 24.072508] drm_ioctl_kernel+0xe8/0x168
[ 24.077086] drm_ioctl+0x320/0x370
[ 24.081123] drm_compat_ioctl+0x40/0xdc
[ 24.085602] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.090895] invoke_syscall+0x80/0x114
[ 24.095294] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.100668] do_el0_svc_compat+0x2c/0x54
[ 24.105242] el0_svc_compat+0x4c/0xe4
[ 24.109548] el0t_32_sync_handler+0xc4/0xf4
[ 24.114381] el0t_32_sync+0x178
[ 24.118688]
[ 24.118688] -> #4 (&kms->commit_lock[i]){+.+.}-{3:3}:
[ 24.125408] __mutex_lock+0xc8/0x384
[ 24.129628] mutex_lock_nested+0x54/0x74
[ 24.134204] lock_crtcs+0x80/0x8c
[ 24.138155] msm_atomic_commit_tail+0x1e8/0x3d0
[ 24.143345] commit_tail+0x7c/0xfc
[ 24.147382] drm_atomic_helper_commit+0x158/0x15c
[ 24.152755] drm_atomic_commit+0x60/0x74
[ 24.157323] drm_atomic_helper_set_config+0x68/0x90
[ 24.162869] drm_mode_setcrtc+0x394/0x648
[ 24.167535] drm_ioctl_kernel+0xe8/0x168
[ 24.172102] drm_ioctl+0x320/0x370
[ 24.176135] drm_compat_ioctl+0x40/0xdc
[ 24.180621] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.185904] invoke_syscall+0x80/0x114
[ 24.190302] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.195673] do_el0_svc_compat+0x2c/0x54
[ 24.200241] el0_svc_compat+0x4c/0xe4
[ 24.204544] el0t_32_sync_handler+0xc4/0xf4
[ 24.209378] el0t_32_sync+0x174/0x178
[ 24.213680] -> #3 (crtc_ww_class_mutex){+.+.}-{3:3}:
[ 24.220308] __ww_mutex_lock.constprop.20+0xe8/0x878
[ 24.225951] ww_mutex_lock+0x60/0xd0
[ 24.230166] modeset_lock+0x190/0x19c
[ 24.234467] drm_modeset_lock+0x34/0x54
[ 24.238953] drmm_mode_config_init+0x550/0x764
[ 24.244065] msm_drm_bind+0x170/0x59c
[ 24.248374] try_to_bring_up_master+0x244/0x294
[ 24.253572] __component_add+0xf4/0x14c
[ 24.258057] component_add+0x2c/0x38
[ 24.262273] dsi_dev_attach+0x2c/0x38
[ 24.266575] dsi_host_attach+0xc4/0x120
[ 24.271060] mipi_dsi_attach+0x34/0x48
[ 24.275456] devm_mipi_dsi_attach+0x28/0x68
[ 24.280298] ti_sn_bridge_probe+0x2b4/0x2dc
[ 24.285137] auxiliary_bus_probe+0x78/0x90
[ 24.289893] really_probe+0x1e4/0x3d8
[ 24.294194] __driver_probe_device+0x14c/0x164
[ 24.299298] driver_probe_device+0x54/0xf8
[ 24.304043] __device_attach_driver+0xb4/0x118
[ 24.309145] bus_for_each_drv+0xb0/0xd4
[ 24.313628] __device_attach+0xcc/0x158
[ 24.318112] device_initial_probe+0x24/0x30
[ 24.322954] bus_probe_device+0x38/0x9c
[ 24.327439] deferred_probe_work_func+0xd4/0xf0
[ 24.332628] process_one_work+0x2f0/0x498
[ 24.337289] process_scheduled_works+0x44/0x48
[ 24.342391] worker_thread+0x1e4/0x26c
[ 24.346788] kthread+0xe4/0xf4
[ 24.350470] ret_from_fork+0x10/0x20
[ 24.354683]
[ 24.354683]
[ 24.354683] -> #2 (crtc_ww_class_acquire){+.+.}-{0:0}:
[ 24.361489] drm_modeset_acquire_init+0xe4/0x138
[ 24.366777] drm_helper_probe_detect_ctx+0x44/0x114
[ 24.372327] check_connector_changed+0xbc/0x198
[ 24.377517] drm_helper_hpd_irq_event+0xcc/0x11c
[ 24.382804] dsi_hpd_worker+0x24/0x30
[ 24.387104] process_one_work+0x2f0/0x498
[ 24.391762] worker_thread+0x1d0/0x26c
[ 24.396158] kthread+0xe4/0xf4
[ 24.399840] ret_from_fork+0x10/0x20
[ 24.404053]
[ 24.404053] -> #1 (&dev->mode_config.mutex){+.+.}-{3:3}:
[ 24.411032] __mutex_lock+0xc8/0x384
[ 24.415247] mutex_lock_nested+0x54/0x74
[ 24.419819] dp_panel_read_sink_caps+0x23c/0x26c
[ 24.425108] dp_display_process_hpd_high+0x34/0xd4
[ 24.430570] dp_display_usbpd_configure_cb+0x30/0x3c
[ 24.436205] hpd_event_thread+0x2ac/0x550
[ 24.440864] kthread+0xe4/0xf4
[ 24.444544] ret_from_fork+0x10/0x20
[ 24.448757]
[ 24.448757] -> #0 (&dp->event_mutex){+.+.}-{3:3}:
[ 24.455116] __lock_acquire+0xe2c/0x10d8
[ 24.459690] lock_acquire+0x1ac/0x2d0
[ 24.463988] __mutex_lock+0xc8/0x384
[ 24.468201] mutex_lock_nested+0x54/0x74
[ 24.472773] msm_dp_display_enable+0x58/0x164
[ 24.477789] dp_bridge_enable+0x24/0x30
[ 24.482273] drm_atomic_bridge_chain_enable+0x78/0x9c
[ 24.488006] drm_atomic_helper_commit_modeset_enables+0x1bc/0x244
[ 24.494801] msm_atomic_commit_tail+0x248/0x3d0
[ 24.499992] commit_tail+0x7c/0xfc
[ 24.504031] drm_atomic_helper_commit+0x158/0x15c
[ 24.509404] drm_atomic_commit+0x60/0x74
[ 24.513976] drm_mode_atomic_ioctl+0x6b0/0x908
[ 24.519079] drm_ioctl_kernel+0xe8/0x168
[ 24.523650] drm_ioctl+0x320/0x370
[ 24.527689] drm_compat_ioctl+0x40/0xdc
[ 24.532175] __arm64_compat_sys_ioctl+0xe0/0x150
[ 24.537463] invoke_syscall+0x80/0x114
[ 24.541861] el0_svc_common.constprop.3+0xc4/0xf8
[ 24.547235] do_el0_svc_compat+0x2c/0x54
[ 24.551806] el0_svc_compat+0x4c/0xe4
[ 24.556106] el0t_32_sync_handler+0xc4/0xf4
[ 24.560948] el0t_32_sync+0x174/0x178
Changes in v2:
-- add circular lockiing trace
Fixes: d4aca42 ("drm/msm/dp: always add fail-safe mode into connector mode list")
Signed-off-by: Kuogee Hsieh <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/481396/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Apr 30, 2022
While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.
System message log shows the following:
=======================================
[ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures.
[ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)'
[ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports:
'need reset'
[ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports:
'need reset'
[ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset'
[ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow:
[ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows:
[ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow:
[ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows:
[ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset'
[ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->slot_reset()
[ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing...
[ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset
--> driver unload
Uninterruptible tasks
=====================
crash> ps | grep UN
213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd]
215 2 0 c000000004c80000 UN 0.0 0 0
[kworker/0:2]
2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd
4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty
4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty
32423 2 26 c00000020038c580 UN 0.0 0 0
[kworker/26:3]
32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd
32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail
33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail
33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup
33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd
33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail
33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd
EEH handler hung while bnx2x sleeping and holding RTNL lock
===========================================================
crash> bt 213
PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd"
#0 [c000000004d477e0] __schedule at c000000000c70808
#1 [c000000004d478b0] schedule at c000000000c70ee0
#2 [c000000004d478e0] schedule_timeout at c000000000c76dec
#3 [c000000004d479c0] msleep at c0000000002120cc
#4 [c000000004d479f0] napi_disable at c000000000a06448
^^^^^^^^^^^^^^^^
#5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x]
#6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x]
#7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc
#8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8
#9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64
And the sleeping source code
============================
crash> dis -ls c000000000a06448
FILE: ../net/core/dev.c
LINE: 6702
6697 {
6698 might_sleep();
6699 set_bit(NAPI_STATE_DISABLE, &n->state);
6700
6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
* 6702 msleep(1);
6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
6704 msleep(1);
6705
6706 hrtimer_cancel(&n->timer);
6707
6708 clear_bit(NAPI_STATE_DISABLE, &n->state);
6709 }
EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:
bnx2x_io_error_detected()
+-> bnx2x_eeh_nic_unload()
+-> bnx2x_del_all_napi()
+-> __netif_napi_del()
bnx2x_io_slot_reset()
+-> bnx2x_netif_stop()
+-> bnx2x_napi_disable()
+->napi_disable()
Fix this by correcting the sequence of NAPI APIs usage,
that is delete the NAPI after disabling it.
Fixes: 7fa6f34 ("bnx2x: AER revised")
Reported-by: David Christensen <[email protected]>
Tested-by: David Christensen <[email protected]>
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
May 13, 2022
Current DP driver implementation has adding safe mode done at dp_hpd_plug_handle() which is expected to be executed under event thread context. However there is possible circular locking happen (see blow stack trace) after edp driver call dp_hpd_plug_handle() from dp_bridge_enable() which is executed under drm_thread context. After review all possibilities methods and as discussed on https://patchwork.freedesktop.org/patch/483155/, supporting EDID compliance tests in the driver is quite hacky. As seen with other vendor drivers, supporting these will be much easier with IGT. Hence removing all the related fail safe code for it so that no possibility of circular lock will happen. Reviewed-by: Stephen Boyd <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> ====================================================== WARNING: possible circular locking dependency detected 5.15.35-lockdep #6 Tainted: G W ------------------------------------------------------ frecon/429 is trying to acquire lock: ffffff808dc3c4e8 (&dev->mode_config.mutex){+.+.}-{3:3}, at: dp_panel_add_fail_safe_mode+0x4c/0xa0 but task is already holding lock: ffffff808dc441e0 (&kms->commit_lock[i]){+.+.}-{3:3}, at: lock_crtcs+0xb4/0x124 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&kms->commit_lock[i]){+.+.}-{3:3}: __mutex_lock_common+0x174/0x1a64 mutex_lock_nested+0x98/0xac lock_crtcs+0xb4/0x124 msm_atomic_commit_tail+0x330/0x748 commit_tail+0x19c/0x278 drm_atomic_helper_commit+0x1dc/0x1f0 drm_atomic_commit+0xc0/0xd8 drm_atomic_helper_set_config+0xb4/0x134 drm_mode_setcrtc+0x688/0x1248 drm_ioctl_kernel+0x1e4/0x338 drm_ioctl+0x3a4/0x684 __arm64_sys_ioctl+0x118/0x154 invoke_syscall+0x78/0x224 el0_svc_common+0x178/0x200 do_el0_svc+0x94/0x13c el0_svc+0x5c/0xec el0t_64_sync_handler+0x78/0x108 el0t_64_sync+0x1a4/0x1a8 -> #2 (crtc_ww_class_mutex){+.+.}-{3:3}: __mutex_lock_common+0x174/0x1a64 ww_mutex_lock+0xb8/0x278 modeset_lock+0x304/0x4ac drm_modeset_lock+0x4c/0x7c drmm_mode_config_init+0x4a8/0xc50 msm_drm_init+0x274/0xac0 msm_drm_bind+0x20/0x2c try_to_bring_up_master+0x3dc/0x470 __component_add+0x18c/0x3c0 component_add+0x1c/0x28 dp_display_probe+0x954/0xa98 platform_probe+0x124/0x15c really_probe+0x1b0/0x5f8 __driver_probe_device+0x174/0x20c driver_probe_device+0x70/0x134 __device_attach_driver+0x130/0x1d0 bus_for_each_drv+0xfc/0x14c __device_attach+0x1bc/0x2bc device_initial_probe+0x1c/0x28 bus_probe_device+0x94/0x178 deferred_probe_work_func+0x1a4/0x1f0 process_one_work+0x5d4/0x9dc worker_thread+0x898/0xccc kthread+0x2d4/0x3d4 ret_from_fork+0x10/0x20 -> #1 (crtc_ww_class_acquire){+.+.}-{0:0}: ww_acquire_init+0x1c4/0x2c8 drm_modeset_acquire_init+0x44/0xc8 drm_helper_probe_single_connector_modes+0xb0/0x12dc drm_mode_getconnector+0x5dc/0xfe8 drm_ioctl_kernel+0x1e4/0x338 drm_ioctl+0x3a4/0x684 __arm64_sys_ioctl+0x118/0x154 invoke_syscall+0x78/0x224 el0_svc_common+0x178/0x200 do_el0_svc+0x94/0x13c el0_svc+0x5c/0xec el0t_64_sync_handler+0x78/0x108 el0t_64_sync+0x1a4/0x1a8 -> #0 (&dev->mode_config.mutex){+.+.}-{3:3}: __lock_acquire+0x2650/0x672c lock_acquire+0x1b4/0x4ac __mutex_lock_common+0x174/0x1a64 mutex_lock_nested+0x98/0xac dp_panel_add_fail_safe_mode+0x4c/0xa0 dp_hpd_plug_handle+0x1f0/0x280 dp_bridge_enable+0x94/0x2b8 drm_atomic_bridge_chain_enable+0x11c/0x168 drm_atomic_helper_commit_modeset_enables+0x500/0x740 msm_atomic_commit_tail+0x3e4/0x748 commit_tail+0x19c/0x278 drm_atomic_helper_commit+0x1dc/0x1f0 drm_atomic_commit+0xc0/0xd8 drm_atomic_helper_set_config+0xb4/0x134 drm_mode_setcrtc+0x688/0x1248 drm_ioctl_kernel+0x1e4/0x338 drm_ioctl+0x3a4/0x684 __arm64_sys_ioctl+0x118/0x154 invoke_syscall+0x78/0x224 el0_svc_common+0x178/0x200 do_el0_svc+0x94/0x13c el0_svc+0x5c/0xec el0t_64_sync_handler+0x78/0x108 el0t_64_sync+0x1a4/0x1a8 Changes in v2: -- re text commit title -- remove all fail safe mode Changes in v3: -- remove dp_panel_add_fail_safe_mode() from dp_panel.h -- add Fixes Changes in v5: -- [email protected] Changes in v6: -- fix Fixes commit ID Fixes: 8b2c181 ("drm/msm/dp: add fail safe mode outside of event_mutex context") Reported-by: Douglas Anderson <[email protected]> Signed-off-by: Kuogee Hsieh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
May 13, 2022
Ido Schimmel says: ==================== mlxsw: Remove size limitations on egress descriptor buffer Petr says: Spectrum machines have two resources related to keeping packets in an internal buffer: bytes (allocated in cell-sized units) for packet payload, and descriptors, for keeping headers. Currently, mlxsw only configures the bytes part of the resource management. Spectrum switches permit a full parallel configuration for the descriptor resources, including port-pool and port-TC-pool quotas. By default, these are all configured to use pool 14, with an infinite quota. The ingress pool 14 is then infinite in size. However, egress pool 14 has finite size by default. The size is chip dependent, but always much lower than what the chip actually permits. As a result, we can easily construct workloads that exhaust the configured descriptor limit. Going forward, mlxsw will have to fix this issue properly by maintaining descriptor buffer sizes, TC bindings, and quotas that match the architecture recommendation. Short term, fix the issue by configuring the egress descriptor pool to be infinite in size as well. This will maintain the same configuration philosophy, but will unlock all chip resources to be usable. In this patchset, patch #1 first adds the "desc" field into the pool configuration register. Then in patch #2, the new field is used to configure both ingress and egress pool 14 as infinite. In patches #3 and #4, add a selftest that verifies that a large burst can be absorbed by the shared buffer. This test specifically exercises a scenario where descriptor buffer is the limiting factor and the test fails without the above patches. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
May 13, 2022
Ido Schimmel says: ==================== mlxsw: Various updates Patches #1-#3 add missing topology diagrams in selftests and perform small cleanups. Patches #4-#5 make small adjustments in QoS configuration. See detailed description in the commit messages. Patches #6-#8 reduce the number of background EMAD transactions. The driver periodically queries the device (via EMAD transactions) about updates that cannot happen in certain situations. This can negatively impact the latency of time critical transactions, as the device is busy processing other transactions. Before: # perf stat -a -e devlink:devlink_hwmsg -- sleep 10 Performance counter stats for 'system wide': 452 devlink:devlink_hwmsg 10.009736160 seconds time elapsed After: # perf stat -a -e devlink:devlink_hwmsg -- sleep 10 Performance counter stats for 'system wide': 0 devlink:devlink_hwmsg 10.001726333 seconds time elapsed ==================== Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
May 13, 2022
As reported by Alan, the CFI (Call Frame Information) in the VDSO time routines is incorrect since commit ce7d805 ("powerpc/vdso: Prepare for switching VDSO to generic C implementation."). DWARF has a concept called the CFA (Canonical Frame Address), which on powerpc is calculated as an offset from the stack pointer (r1). That means when the stack pointer is changed there must be a corresponding CFI directive to update the calculation of the CFA. The current code is missing those directives for the changes to r1, which prevents gdb from being able to generate a backtrace from inside VDSO functions, eg: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x00007fffffffd960 in ?? () #3 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 Backtrace stopped: frame did not save the PC Alan helpfully describes some rules for correctly maintaining the CFI information: 1) Every adjustment to the current frame address reg (ie. r1) must be described, and exactly at the instruction where r1 changes. Why? Because stack unwinding might want to access previous frames. 2) If a function changes LR or any non-volatile register, the save location for those regs must be given. The CFI can be at any instruction after the saves up to the point that the reg is changed. (Exception: LR save should be described before a bl. not after) 3) If asychronous unwind info is needed then restores of LR and non-volatile regs must also be described. The CFI can be at any instruction after the reg is restored up to the point where the save location is (potentially) trashed. Fix the inability to backtrace by adding CFI directives describing the changes to r1, ie. satisfying rule 1. Also change the information for LR to point to the copy saved on the stack, not the value in r0 that will be overwritten by the function call. Finally, add CFI directives describing the save/restore of r2. With the fix gdb can correctly back trace and navigate up and down the stack: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x0000000100015b60 in gettime () #3 0x000000010000c8bc in print_long_format () #4 0x000000010000d180 in print_current_files () #5 0x00000001000054ac in main () (gdb) up #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #2 0x0000000100015b60 in gettime () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #4 0x000000010000d180 in print_current_files () (gdb) #5 0x00000001000054ac in main () (gdb) Initial frame selected; you cannot go up. (gdb) down #4 0x000000010000d180 in print_current_files () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #2 0x0000000100015b60 in gettime () (gdb) #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #0 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) Fixes: ce7d805 ("powerpc/vdso: Prepare for switching VDSO to generic C implementation.") Cc: [email protected] # v5.11+ Reported-by: Alan Modra <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Segher Boessenkool <[email protected]> Link: https://lore.kernel.org/r/[email protected]
BluezTestBot
pushed a commit
that referenced
this issue
May 13, 2022
'rmmod pmt_telemetry' panics with: BUG: kernel NULL pointer dereference, address: 0000000000000040 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 1697 Comm: rmmod Tainted: G S W -------- --- 5.18.0-rc4 #3 Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3056.B00.2201310233 01/31/2022 RIP: 0010:device_del+0x1b/0x3d0 Code: e8 1a d9 e9 ff e9 58 ff ff ff 48 8b 08 eb dc 0f 1f 44 00 00 41 56 41 55 41 54 55 48 8d af 80 00 00 00 53 48 89 fb 48 83 ec 18 <4c> 8b 67 40 48 89 ef 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 RSP: 0018:ffffb520415cfd60 EFLAGS: 00010286 RAX: 0000000000000070 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000080 R08: ffffffffffffffff R09: ffffb520415cfd78 R10: 0000000000000002 R11: ffffb520415cfd78 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f7e198e5740(0000) GS:ffff905c9f700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000040 CR3: 000000010782a005 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> ? __xa_erase+0x53/0xb0 device_unregister+0x13/0x50 intel_pmt_dev_destroy+0x34/0x60 [pmt_class] pmt_telem_remove+0x40/0x50 [pmt_telemetry] auxiliary_bus_remove+0x18/0x30 device_release_driver_internal+0xc1/0x150 driver_detach+0x44/0x90 bus_remove_driver+0x74/0xd0 auxiliary_driver_unregister+0x12/0x20 pmt_telem_exit+0xc/0xe4a [pmt_telemetry] __x64_sys_delete_module+0x13a/0x250 ? syscall_trace_enter.isra.19+0x11e/0x1a0 do_syscall_64+0x58/0x80 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x67/0x80 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x67/0x80 ? syscall_exit_to_user_mode+0x12/0x30 ? do_syscall_64+0x67/0x80 ? exc_page_fault+0x64/0x140 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7e1803a05b Code: 73 01 c3 48 8b 0d 2d 4e 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 4d 38 00 f7 d8 64 89 01 48 The probe function, pmt_telem_probe(), adds an entry for devices even if they have not been initialized. This results in the array of initialized devices containing both initialized and uninitialized entries. This causes a panic in the remove function, pmt_telem_remove() which expects the array to only contain initialized entries. Only use an entry when a device is initialized. Cc: "David E. Box" <[email protected]> Cc: Hans de Goede <[email protected]> Cc: Mark Gross <[email protected]> Cc: [email protected] Signed-off-by: David Arcari <[email protected]> Signed-off-by: Prarit Bhargava <[email protected]> Reviewed-by: David E. Box <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
May 13, 2022
Ido Schimmel says: ==================== mlxsw: A dedicated notifier block for router code Petr says: Currently all netdevice events are handled in the centralized notifier handler maintained by spectrum.c. Since a number of events are involving router code, spectrum.c needs to dispatch them to spectrum_router.c. The spectrum module therefore needs to know more about the router code than it should have, and there is are several API points through which the two modules communicate. In this patchset, move bulk of the router-related event handling to the router code. Some of the knowledge has to stay: spectrum.c cannot veto events that the router supports, and vice versa. But beyond that, the two can ignore each other's details, which leads to more focused and simpler code. As a side effect, this fixes L3 HW stats support on tunnel netdevices. The patch set progresses as follows: - In patch #1, change spectrum code to not bounce L3 enslavement, which the router code supports. - In patch #2, add a new do-nothing notifier block to the router code. - In patches #3-#6, move router-specific event handling to the router module. In patch #7, clean up a comment. - In patch #8, use the advantage that all router event handling is in the router code and clean up taking router lock. - mlxsw supports L3 HW stats on tunnels as of this patchset. Patches #9 and #10 therefore add a selftest for L3 HW stats support on tunnels. ==================== Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
May 15, 2024
…/git/pablo/gtp Pablo neira Ayuso says: ==================== gtp pull request 24-05-07 This v3 includes: - fix for clang uninitialized variable per Jakub. - address Smatch and Coccinelle reports per Simon - remove inline in new IPv6 support per Simon - fix memleaks in netlink control plane per Simon -o- The following patchset contains IPv6 GTP driver support for net-next, this also includes IPv6 over IPv4 and vice-versa: Patch #1 removes a unnecessary stack variable initialization in the socket routine. Patch #2 deals with GTP extension headers. This variable length extension header to decapsulate packets accordingly. Otherwise, packets are dropped when these extension headers are present which breaks interoperation with other non-Linux based GTP implementations. Patch #3 prepares for IPv6 support by moving IPv4 specific fields in PDP context objects to a union. Patch #4 adds IPv6 support while retaining backward compatibility. Three new attributes allows to declare an IPv6 GTP tunnel GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6 as well as IFLA_GTP_LOCAL6 to declare the IPv6 GTP UDP socket. Up to this patch, only IPv6 outer in IPv6 inner is supported. Patch #5 uses IPv6 address /64 prefix for UE/MS in the inner headers. Unlike IPv4, which provides a 1:1 mapping between UE/MS, IPv6 tunnel encapsulates traffic for /64 address as specified by 3GPP TS. Patch has been split from Patch #4 to highlight this behaviour. Patch #6 passes up IPv6 link-local traffic, such as IPv6 SLAAC, for handling to userspace so they are handled as control packets. Patch #7 prepares to allow for GTP IPv4 over IPv6 and vice-versa by moving IP specific debugging out of the function to build IPv4 and IPv6 GTP packets. Patch #8 generalizes TOS/DSCP handling following similar approach as in the existing iptunnel infrastructure. Patch #9 adds a helper function to build an IPv4 GTP packet in the outer header. Patch #10 adds a helper function to build an IPv6 GTP packet in the outer header. Patch #11 adds support for GTP IPv4-over-IPv6 and vice-versa. Patch #12 allows to use the same TID/TEID (tunnel identifier) for inner IPv4 and IPv6 packets for better UE/MS dual stack integration. This series integrates with the osmocom.org project CI and TTCN-3 test infrastructure (Oliver Smith) as well as the userspace libgtpnl library. Thanks to Harald Welte, Oliver Smith and Pau Espin for reviewing and providing feedback through the osmocom.org redmine platform to make this happen. ==================== Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
May 15, 2024
Puranjay Mohan says: ==================== bpf: Inline helpers in arm64 and riscv JITs Changes in v5 -> v6: arm64 v5: https://lore.kernel.org/all/[email protected]/ riscv v2: https://lore.kernel.org/all/[email protected]/ - Combine riscv and arm64 changes in single series - Some coding style fixes Changes in v4 -> v5: v4: https://lore.kernel.org/all/[email protected]/ - Implement the inlining of the bpf_get_smp_processor_id() in the JIT. NOTE: This needs to be based on: https://lore.kernel.org/all/[email protected]/ to be built. Manual run of bpf-ci with this series rebased on above: kernel-patches/bpf#6929 Changes in v3 -> v4: v3: https://lore.kernel.org/all/[email protected]/ - Fix coding style issue related to C89 standards. Changes in v2 -> v3: v2: https://lore.kernel.org/all/[email protected]/ - Fixed the xlated dump of percpu mov to "r0 = &(void __percpu *)(r0)" - Made ARM64 and x86-64 use the same code for inlining. The only difference that remains is the per-cpu address of the cpu_number. Changes in v1 -> v2: v1: https://lore.kernel.org/all/[email protected]/ - Add a patch to inline bpf_get_smp_processor_id() - Fix an issue in MRS instruction encoding as pointed out by Will - Remove CONFIG_SMP check because arm64 kernel always compiles with CONFIG_SMP This series adds the support of internal only per-CPU instructions and inlines the bpf_get_smp_processor_id() helper call for ARM64 and RISC-V BPF JITs. Here is an example of calls to bpf_get_smp_processor_id() and percpu_array_map_lookup_elem() before and after this series on ARM64. BPF ===== BEFORE AFTER -------- ------- int cpu = bpf_get_smp_processor_id(); int cpu = bpf_get_smp_processor_id(); (85) call bpf_get_smp_processor_id#229032 (85) call bpf_get_smp_processor_id#8 p = bpf_map_lookup_elem(map, &zero); p = bpf_map_lookup_elem(map, &zero); (18) r1 = map[id:78] (18) r1 = map[id:153] (18) r2 = map[id:82][0]+65536 (18) r2 = map[id:157][0]+65536 (85) call percpu_array_map_lookup_elem#313512 (07) r1 += 496 (61) r0 = *(u32 *)(r2 +0) (35) if r0 >= 0x1 goto pc+5 (67) r0 <<= 3 (0f) r0 += r1 (79) r0 = *(u64 *)(r0 +0) (bf) r0 = &(void __percpu *)(r0) (05) goto pc+1 (b7) r0 = 0 ARM64 JIT =========== BEFORE AFTER -------- ------- int cpu = bpf_get_smp_processor_id(); int cpu = bpf_get_smp_processor_id(); mov x10, #0xfffffffffffff4d0 mrs x10, sp_el0 movk x10, #0x802b, lsl #16 ldr w7, [x10, #24] movk x10, #0x8000, lsl #32 blr x10 add x7, x0, #0x0 p = bpf_map_lookup_elem(map, &zero); p = bpf_map_lookup_elem(map, &zero); mov x0, #0xffff0003ffffffff mov x0, #0xffff0003ffffffff movk x0, #0xce5c, lsl #16 movk x0, #0xe0f3, lsl #16 movk x0, #0xca00 movk x0, #0x7c00 mov x1, #0xffff8000ffffffff mov x1, #0xffff8000ffffffff movk x1, #0x8bdb, lsl #16 movk x1, #0xb0c7, lsl #16 movk x1, #0x6000 movk x1, #0xe000 mov x10, #0xffffffffffff3ed0 add x0, x0, #0x1f0 movk x10, #0x802d, lsl #16 ldr w7, [x1] movk x10, #0x8000, lsl #32 cmp x7, #0x1 blr x10 b.cs 0x0000000000000090 add x7, x0, #0x0 lsl x7, x7, #3 add x7, x7, x0 ldr x7, [x7] mrs x10, tpidr_el1 add x7, x7, x10 b 0x0000000000000094 mov x7, #0x0 Performance improvement found using benchmark[1] ./benchs/run_bench_trigger.sh glob-arr-inc arr-inc hash-inc +---------------+-------------------+-------------------+--------------+ | Name | Before | After | % change | |---------------+-------------------+-------------------+--------------| | glob-arr-inc | 23.380 ± 1.675M/s | 25.893 ± 0.026M/s | + 10.74% | | arr-inc | 23.928 ± 0.034M/s | 25.213 ± 0.063M/s | + 5.37% | | hash-inc | 12.352 ± 0.005M/s | 12.609 ± 0.013M/s | + 2.08% | +---------------+-------------------+-------------------+--------------+ [1] anakryiko/linux@8dec900975ef RISCV64 JIT output for `call bpf_get_smp_processor_id` ======================================================= Before After -------- ------- auipc t1,0x848c ld a5,32(tp) jalr 604(t1) mv a5,a0 Benchmark using [1] on Qemu. ./benchs/run_bench_trigger.sh glob-arr-inc arr-inc hash-inc +---------------+------------------+------------------+--------------+ | Name | Before | After | % change | |---------------+------------------+------------------+--------------| | glob-arr-inc | 1.077 ± 0.006M/s | 1.336 ± 0.010M/s | + 24.04% | | arr-inc | 1.078 ± 0.002M/s | 1.332 ± 0.015M/s | + 23.56% | | hash-inc | 0.494 ± 0.004M/s | 0.653 ± 0.001M/s | + 32.18% | +---------------+------------------+------------------+--------------+ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
May 15, 2024
…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 skips transaction if object type provides no .update interface. Patch #2 skips NETDEV_CHANGENAME which is unused. Patch #3 enables conntrack to handle Multicast Router Advertisements and Multicast Router Solicitations from the Multicast Router Discovery protocol (RFC4286) as untracked opposed to invalid packets. From Linus Luessing. Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of dropping them, from Jason Xing. Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0, also from Jason. Patch #6 removes reference in netfilter's sysctl documentation on pickup entries which were already removed by Florian Westphal. Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which allows to evict entries from the conntrack table, also from Florian. Patches #8 to #16 updates nf_tables pipapo set backend to allocate the datastructure copy on-demand from preparation phase, to better deal with OOM situations where .commit step is too late to fail. Series from Florian Westphal. Patch #17 adds a selftest with packetdrill to cover conntrack TCP state transitions, also from Florian. Patch #18 use GFP_KERNEL to clone elements from control plane to avoid quick atomic reserves exhaustion with large sets, reporter refers to million entries magnitude. * tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: allow clone callbacks to sleep selftests: netfilter: add packetdrill based conntrack tests netfilter: nft_set_pipapo: remove dirty flag netfilter: nft_set_pipapo: move cloning of match info to insert/removal path netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone netfilter: nft_set_pipapo: merge deactivate helper into caller netfilter: nft_set_pipapo: prepare walk function for on-demand clone netfilter: nft_set_pipapo: prepare destroy function for on-demand clone netfilter: nft_set_pipapo: make pipapo_clone helper return NULL netfilter: nft_set_pipapo: move prove_locking helper around netfilter: conntrack: remove flowtable early-drop test netfilter: conntrack: documentation: remove reference to non-existent sysctl netfilter: use NF_DROP instead of -NF_DROP netfilter: conntrack: dccp: try not to drop skb in conntrack netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler netfilter: nf_tables: skip transaction if update object is not implemented ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 20, 2024
With commit c4cb231 ("iommu/amd: Add support for enable/disable IOPF") we are hitting below issue. This happens because in IOPF enablement path it holds spin lock with irq disable and then tries to take mutex lock. dmesg: ----- [ 0.938739] ============================= [ 0.938740] [ BUG: Invalid wait context ] [ 0.938742] 6.10.0-rc1+ #1 Not tainted [ 0.938745] ----------------------------- [ 0.938746] swapper/0/1 is trying to lock: [ 0.938748] ffffffff8c9f01d8 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x78/0x4a0 [ 0.938767] other info that might help us debug this: [ 0.938768] context-{5:5} [ 0.938769] 7 locks held by swapper/0/1: [ 0.938772] #0: ffff888101a91310 (&group->mutex){+.+.}-{4:4}, at: bus_iommu_probe+0x70/0x160 [ 0.938790] #1: ffff888101d1f1b8 (&domain->lock){....}-{3:3}, at: amd_iommu_attach_device+0xa5/0x700 [ 0.938799] #2: ffff888101cc3d18 (&dev_data->lock){....}-{3:3}, at: amd_iommu_attach_device+0xc5/0x700 [ 0.938806] #3: ffff888100052830 (&iommu->lock){....}-{2:2}, at: amd_iommu_iopf_add_device+0x3f/0xa0 [ 0.938813] #4: ffffffff8945a340 (console_lock){+.+.}-{0:0}, at: _printk+0x48/0x50 [ 0.938822] #5: ffffffff8945a390 (console_srcu){....}-{0:0}, at: console_flush_all+0x58/0x4e0 [ 0.938867] #6: ffffffff82459f80 (console_owner){....}-{0:0}, at: console_flush_all+0x1f0/0x4e0 [ 0.938872] stack backtrace: [ 0.938874] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.10.0-rc1+ #1 [ 0.938877] Hardware name: HP HP EliteBook 745 G3/807E, BIOS N73 Ver. 01.39 04/16/2019 Fix above issue by re-arranging code in attach device path: - move device PASID/IOPF enablement outside lock in AMD IOMMU driver. This is safe as core layer holds group->mutex lock before calling iommu_ops->attach_dev. Reported-by: Borislav Petkov <[email protected]> Reported-by: Mikhail Gavrilov <[email protected]> Reported-by: Chris Bainbridge <[email protected]> Fixes: c4cb231 ("iommu/amd: Add support for enable/disable IOPF") Tested-by: Borislav Petkov <[email protected]> Tested-by: Chris Bainbridge <[email protected]> Tested-by: Mikhail Gavrilov <[email protected]> Signed-off-by: Vasant Hegde <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 20, 2024
…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <[email protected]> Tested-by: Milian Wolff <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 20, 2024
We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
Petr Machata says: ==================== mlxsw: ACL fixes Ido Schimmel writes: Patches #1-#3 fix various spelling mistakes I noticed while working on the code base. Patch #4 fixes a general protection fault by bailing out when the error occurs and warning. Patch #5 fixes the warning. Patch #6 fixes ACL scale regression and firmware errors. See the commit messages for more info. ==================== Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes insufficient sanitization of netlink attributes for the inner expression which can trigger nul-pointer dereference, from Davide Ornaghi. Patch #2 address a report that there is a race condition between namespace cleanup and the garbage collection of the list:set type. This patch resolves this issue with other minor issues as well, from Jozsef Kadlecsik. Patch #3 ip6_route_me_harder() ignores flowlabel/dsfield when ip dscp has been mangled, this unbreaks ip6 dscp set $v, from Florian Westphal. All of these patches address issues that are present in several releases. * tag 'nf-24-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: Use flowlabel flow key when re-routing mangled packets netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type netfilter: nft_inner: validate mandatory meta and payload ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
Petr Machata says: ==================== Allow configuration of multipath hash seed Let me just quote the commit message of patch #2 here to inform the motivation and some of the implementation: When calculating hashes for the purpose of multipath forwarding, both IPv4 and IPv6 code currently fall back on flow_hash_from_keys(). That uses a randomly-generated seed. That's a fine choice by default, but unfortunately some deployments may need a tighter control over the seed used. In this patchset, make the seed configurable by adding a new sysctl key, net.ipv4.fib_multipath_hash_seed to control the seed. This seed is used specifically for multipath forwarding and not for the other concerns that flow_hash_from_keys() is used for, such as queue selection. Expose the knob as sysctl because other such settings, such as headers to hash, are also handled that way. Despite being placed in the net.ipv4 namespace, the multipath seed sysctl is used for both IPv4 and IPv6, similarly to e.g. a number of TCP variables. Like those, the multipath hash seed is a per-netns variable. The seed used by flow_hash_from_keys() is a 128-bit quantity. However it seems that usually the seed is a much more modest value. 32 bits seem typical (Cisco, Cumulus), some systems go even lower. For that reason, and to decouple the user interface from implementation details, go with a 32-bit quantity, which is then quadruplicated to form the siphash key. One example of use of this interface is avoiding hash polarization, where two ECMP routers, one behind the other, happen to make consistent hashing decisions, and as a result, part of the ECMP space of the latter router is never used. Another is a load balancer where several machines forward traffic to one of a number of leaves, and the forwarding decisions need to be made consistently. (This is a case of a desired hash polarization, mentioned e.g. in chapter 6.3 of [0].) There has already been a proposal to include a hash seed control interface in the past[1]. - Patches #1-#2 contain the substance of the work - Patch #3 is an mlxsw offload - Patches #4 and #5 are a selftest [0] https://www.usenix.org/system/files/conference/nsdi18/nsdi18-araujo.pdf [1] https://lore.kernel.org/netdev/YIlVpYMCn%2F8WfE1P@rnd/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
Nikolay Aleksandrov says: ==================== net: bridge: mst: fix suspicious rcu usage warning This set fixes a suspicious RCU usage warning triggered by syzbot[1] in the bridge's MST code. After I converted br_mst_set_state to RCU, I forgot to update the vlan group dereference helper. Fix it by using the proper helper, in order to do that we need to pass the vlan group which is already obtained correctly by the callers for their respective context. Patch 01 is a requirement for the fix in patch 02. Note I did consider rcu_dereference_rtnl() but the churn is much bigger and in every part of the bridge. We can do that as a cleanup in net-next. [1] https://syzkaller.appspot.com/bug?extid=9bbe2de1bc9d470eb5fe ============================= WARNING: suspicious RCU usage 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Not tainted ----------------------------- net/bridge/br_private.h:1599 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by syz-executor.1/5374: #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: mmap_read_lock include/linux/mmap_lock.h:144 [inline] #0: ffff888022d50b18 (&mm->mmap_lock){++++}-{3:3}, at: __mm_populate+0x1b0/0x460 mm/gup.c:2111 #1: ffffc90000a18c00 ((&p->forward_delay_timer)){+.-.}-{0:0}, at: call_timer_fn+0xc0/0x650 kernel/time/timer.c:1789 #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #2: ffff88805fb2ccb8 (&br->lock){+.-.}-{2:2}, at: br_forward_delay_timer_expired+0x50/0x440 net/bridge/br_stp_timer.c:86 #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:781 [inline] #3: ffffffff8e333fa0 (rcu_read_lock){....}-{1:2}, at: br_mst_set_state+0x171/0x7a0 net/bridge/br_mst.c:105 stack backtrace: CPU: 1 PID: 5374 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00235-g8a92980606e3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nbp_vlan_group net/bridge/br_private.h:1599 [inline] br_mst_set_state+0x29e/0x7a0 net/bridge/br_mst.c:106 br_set_state+0x28a/0x7b0 net/bridge/br_stp.c:47 br_forward_delay_timer_expired+0x176/0x440 net/bridge/br_stp_timer.c:88 call_timer_fn+0x18e/0x650 kernel/time/timer.c:1792 expire_timers kernel/time/timer.c:1843 [inline] __run_timers kernel/time/timer.c:2417 [inline] __run_timer_base+0x66a/0x8e0 kernel/time/timer.c:2428 run_timer_base kernel/time/timer.c:2437 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2447 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
The syzbot fuzzer found that the interrupt-URB completion callback in the cdc-wdm driver was taking too long, and the driver's immediate resubmission of interrupt URBs with -EPROTO status combined with the dummy-hcd emulation to cause a CPU lockup: cdc_wdm 1-1:1.0: nonzero urb status received: -71 cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625] CPU#0 Utilization every 4s during lockup: #1: 98% system, 0% softirq, 3% hardirq, 0% idle #2: 98% system, 0% softirq, 3% hardirq, 0% idle #3: 98% system, 0% softirq, 3% hardirq, 0% idle #4: 98% system, 0% softirq, 3% hardirq, 0% idle #5: 98% system, 1% softirq, 3% hardirq, 0% idle Modules linked in: irq event stamp: 73096 hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline] hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994 hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline] hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551 softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline] softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582 softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588 CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Testing showed that the problem did not occur if the two error messages -- the first two lines above -- were removed; apparently adding material to the kernel log takes a surprisingly large amount of time. In any case, the best approach for preventing these lockups and to avoid spamming the log with thousands of error messages per second is to ratelimit the two dev_err() calls. Therefore we replace them with dev_err_ratelimited(). Signed-off-by: Alan Stern <[email protected]> Suggested-by: Greg KH <[email protected]> Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 9908a32 ("USB: remove err() macro from usb class drivers") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
Petr Machata says: ==================== mlxsw: Handle MTU values Amit Cohen writes: The driver uses two values for maximum MTU, but neither is accurate. In addition, the value which is configured to hardware is not calculated correctly. Handle these issues and expose accurate values for minimum and maximum MTU per netdevice. Add test cases to check that the exposed values are really supported. Patch set overview: Patches #1-#3 set the driver to use accurate values for MTU Patch #4 aligns the driver to always use the same value for maximum MTU Patch #5 adds a test ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
Petr Machata says: ==================== mlxsw: Use page pool for Rx buffers allocation Amit Cohen writes: After using NAPI to process events from hardware, the next step is to use page pool for Rx buffers allocation, which is also enhances performance. To simplify this change, first use page pool to allocate one continuous buffer for each packet, later memory consumption can be improved by using fragmented buffers. This set significantly enhances mlxsw driver performance, CPU can handle about 370% of the packets per second it previously handled. The next planned improvement is using XDP to optimize telemetry. Patch set overview: Patches #1-#2 are small preparations for page pool usage Patch #3 initializes page pool, but do not use it Patch #4 converts the driver to use page pool for buffers allocations Patch #5 is an optimization for buffer access Patch #6 cleans up an unused structure Patch #7 uses napi_consume_skb() as part of Tx completion ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 fixes the suspicious RCU usage warning that resulted from the recent fix for the race between namespace cleanup and gc in ipset left out checking the pernet exit phase when calling rcu_dereference_protected(), from Jozsef Kadlecsik. Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting hooks, from Jianguo Wu. Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core. The connection tracking system is loaded on-demand, this ensures availability of this knob regardless. Patch #4-#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu. netfilter pull request 24-06-19 * tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: selftests: add selftest for the SRv6 End.DX6 behavior with netfilter selftests: add selftest for the SRv6 End.DX4 behavior with netfilter netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors netfilter: ipset: Fix suspicious rcu_dereference_protected() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
Danielle Ratson says: ==================== Add ability to flash modules' firmware CMIS compliant modules such as QSFP-DD might be running a firmware that can be updated in a vendor-neutral way by exchanging messages between the host and the module as described in section 7.2.2 of revision 4.0 of the CMIS standard. According to the CMIS standard, the firmware update process is done using a CDB commands sequence. CDB (Command Data Block Message Communication) reads and writes are performed on memory map pages 9Fh-AFh according to the CMIS standard, section 8.12 of revision 4.0. Add a pair of new ethtool messages that allow: * User space to trigger firmware update of transceiver modules * The kernel to notify user space about the progress of the process The user interface is designed to be asynchronous in order to avoid RTNL being held for too long and to allow several modules to be updated simultaneously. The interface is designed with CMIS compliant modules in mind, but kept generic enough to accommodate future use cases, if these arise. The kernel interface that will implement the firmware update using CDB command will include 2 layers that will be added under ethtool: * The upper layer that will be triggered from the module layer, is cmis_ fw_update. * The lower one is cmis_cdb. In the future there might be more operations to implement using CDB commands. Therefore, the idea is to keep the cmis_cdb interface clean and the cmis_fw_update specific to the cdb commands handling it. The communication between the kernel and the driver will be done using two ethtool operations that enable reading and writing the transceiver module EEPROM. The operation ethtool_ops::get_module_eeprom_by_page, that is already implemented, will be used for reading from the EEPROM the CDB reply, e.g. reading module setting, state, etc. The operation ethtool_ops::set_module_eeprom_by_page, that is added in the current patchset, will be used for writing to the EEPROM the CDB command such as start firmware image, run firmware image, etc. Therefore in order for a driver to implement module flashing, that driver needs to implement the two functions mentioned above. Patchset overview: Patch #1-#2: Implement the EEPROM writing in mlxsw. Patch #3: Define the interface between the kernel and user space. Patch #4: Add ability to notify the flashing firmware progress. Patch #5: Veto operations during flashing. Patch #6: Add extended compliance codes. Patch #7: Add the cdb layer. Patch #8: Add the fw_update layer. Patch #9: Add ability to flash transceiver modules' firmware. v8: Patch #7: * In the ethtool_cmis_wait_for_cond() evaluate the condition once more to decide if the error code should be -ETIMEDOUT or something else. * s/netdev_err/netdev_err_once. v7: Patch #4: * Return -ENOMEM instead of PTR_ERR(attr) on ethnl_module_fw_flash_ntf_put_err(). Patch #9: * Fix Warning for not unlocking the spin_lock in the error flow on module_flash_fw_work_list_add(). * Avoid the fall-through on ethnl_sock_priv_destroy(). v6: * Squash some of the last patch to patch #5 and patch #9. Patch #3: * Add paragraph in .rst file. Patch #4: * Reserve '1' more place on SKB for NUL terminator in the error message string. * Add more prints on error flow, re-write the printing function and add ethnl_module_fw_flash_ntf_put_err(). * Change the communication method so notification will be sent in unicast instead of multicast. * Add new 'struct ethnl_module_fw_flash_ntf_params' that holds the relevant info for unicast communication and use it to send notification to the specific socket. * s/nla_put_u64_64bit/nla_put_uint/ Patch #7: * In ethtool_cmis_cdb_init(), Use 'const' for the 'params' parameter. Patch #8: * Add a list field to struct ethtool_module_fw_flash for module_fw_flash_work_list that will be presented in the next patch. * Move ethtool_cmis_fw_update() cleaning to a new function that will be represented in the next patch. * Move some of the fields in struct ethtool_module_fw_flash to a separate struct, so ethtool_cmis_fw_update() will get only the relevant parameters for it. * Edit the relevant functions to get the relevant params for them. * s/CMIS_MODULE_READY_MAX_DURATION_USEC/CMIS_MODULE_READY_MAX_DURATION_MSEC Patch #9: * Add a paragraph in the commit message. * Rename labels in module_flash_fw_schedule(). * Add info to genl_sk_priv_*() and implement the relevant callbacks, in order to handle properly a scenario of closing the socket from user space before the work item was ended. * Add a list the holds all the ethtool_module_fw_flash struct that corresponds to the in progress work items. * Add a new enum for the socket types. * Use both above to identify a flashing socket, add it to the list and when closing socket affect only the flashing type. * Create a new function that will get the work item instead of ethtool_cmis_fw_update(). * Edit the relevant functions to get the relevant params for them. * The new function will call the old ethtool_cmis_fw_update(), and do the cleaning, so the existence of the list should be completely isolated in module.c. =================== Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jun 28, 2024
Petr Machata says: ==================== selftest: Clean-up and stabilize mirroring tests The mirroring selftests work by sending ICMP traffic between two hosts. Along the way, this traffic is mirrored to a gretap netdevice, and counter taps are then installed strategically along the path of the mirrored traffic to verify the mirroring took place. The problem with this is that besides mirroring the primary traffic, any other service traffic is mirrored as well. At the same time, because the tests need to work in HW-offloaded scenarios, the ability of the device to do arbitrary packet inspection should not be taken for granted. Most tests therefore simply use matchall, one uses flower to match on IP address. As a result, the selftests are noisy. mirror_test() accommodated this noisiness by giving the counters an allowance of several packets. But that only works up to a point, and on busy systems won't be always enough. In this patch set, clean up and stabilize the mirroring selftests. The original intention was to port the tests over to UDP, but the logic of ICMP ends up being so entangled in the mirroring selftests that the changes feel overly invasive. Instead, ICMP is kept, but where possible, we match on ICMP message type, thus filtering out hits by other ICMP messages. Where this is not practical (where the counter tap is put on a device that carries encapsulated packets), switch the counter condition to _at least_ X observed packets. This is less robust, but barely so -- probably the only scenario that this would not catch is something like erroneous packet duplication, which would hopefully get caught by the numerous other tests in this extensive suite. - Patches #1 to #3 clean up parameters at various helpers. - Patches #4 to #6 stabilize the mirroring selftests as described above. - Mirroring tests currently allow testing SW datapath even on HW netdevices by trapping traffic to the SW datapath. This complicates the tests a bit without a good reason: to test SW datapath, just run the selftests on the veth topology. Thus in patch #7, drop support for this dual SW/HW testing. - At this point, some cleanups were either made possible by the previous patches, or were always possible. In patches #8 to #11, realize these cleanups. - In patch #12, fix mlxsw mirror_gre selftest to respect setting TESTS. ==================== Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jul 10, 2024
…play
During inode logging (and log replay too), we are holding a transaction
handle and we often need to call btrfs_iget(), which will read an inode
from its subvolume btree if it's not loaded in memory and that results in
allocating an inode with GFP_KERNEL semantics at the btrfs_alloc_inode()
callback - and this may recurse into the filesystem in case we are under
memory pressure and attempt to commit the current transaction, resulting
in a deadlock since the logging (or log replay) task is holding a
transaction handle open.
Syzbot reported this with the following stack traces:
WARNING: possible circular locking dependency detected
6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0 Not tainted
------------------------------------------------------
syz-executor.1/9919 is trying to acquire lock:
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: might_alloc include/linux/sched/mm.h:334 [inline]
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_pre_alloc_hook mm/slub.c:3891 [inline]
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: slab_alloc_node mm/slub.c:3981 [inline]
ffffffff8dd3aac0 (fs_reclaim){+.+.}-{0:0}, at: kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020
but task is already holding lock:
ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&ei->log_mutex){+.+.}-{3:3}:
__mutex_lock_common kernel/locking/mutex.c:608 [inline]
__mutex_lock+0x175/0x9c0 kernel/locking/mutex.c:752
btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481
btrfs_log_inode_parent+0x8cb/0x2a90 fs/btrfs/tree-log.c:7079
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180
btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959
vfs_fsync_range+0x141/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2794 [inline]
btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0x6b6/0x1140 fs/read_write.c:590
ksys_write+0x12f/0x260 fs/read_write.c:643
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #2 (btrfs_trans_num_extwriters){++++}-{0:0}:
join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315
start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700
btrfs_commit_super+0xa1/0x110 fs/btrfs/disk-io.c:4170
close_ctree+0xcb0/0xf90 fs/btrfs/disk-io.c:4324
generic_shutdown_super+0x159/0x3d0 fs/super.c:642
kill_anon_super+0x3a/0x60 fs/super.c:1226
btrfs_kill_super+0x3b/0x50 fs/btrfs/super.c:2096
deactivate_locked_super+0xbe/0x1a0 fs/super.c:473
deactivate_super+0xde/0x100 fs/super.c:506
cleanup_mnt+0x222/0x450 fs/namespace.c:1267
task_work_run+0x14e/0x250 kernel/task_work.c:180
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x278/0x2a0 kernel/entry/common.c:218
__do_fast_syscall_32+0x80/0x120 arch/x86/entry/common.c:389
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #1 (btrfs_trans_num_writers){++++}-{0:0}:
__lock_release kernel/locking/lockdep.c:5468 [inline]
lock_release+0x33e/0x6c0 kernel/locking/lockdep.c:5774
percpu_up_read include/linux/percpu-rwsem.h:99 [inline]
__sb_end_write include/linux/fs.h:1650 [inline]
sb_end_intwrite include/linux/fs.h:1767 [inline]
__btrfs_end_transaction+0x5ca/0x920 fs/btrfs/transaction.c:1071
btrfs_commit_inode_delayed_inode+0x228/0x330 fs/btrfs/delayed-inode.c:1301
btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291
evict+0x2ed/0x6c0 fs/inode.c:667
iput_final fs/inode.c:1741 [inline]
iput.part.0+0x5a8/0x7f0 fs/inode.c:1767
iput+0x5c/0x80 fs/inode.c:1757
dentry_unlink_inode+0x295/0x480 fs/dcache.c:400
__dentry_kill+0x1d0/0x600 fs/dcache.c:603
dput.part.0+0x4b1/0x9b0 fs/dcache.c:845
dput+0x1f/0x30 fs/dcache.c:835
ovl_stack_put+0x60/0x90 fs/overlayfs/util.c:132
ovl_destroy_inode+0xc6/0x190 fs/overlayfs/super.c:182
destroy_inode+0xc4/0x1b0 fs/inode.c:311
iput_final fs/inode.c:1741 [inline]
iput.part.0+0x5a8/0x7f0 fs/inode.c:1767
iput+0x5c/0x80 fs/inode.c:1757
dentry_unlink_inode+0x295/0x480 fs/dcache.c:400
__dentry_kill+0x1d0/0x600 fs/dcache.c:603
shrink_kill fs/dcache.c:1048 [inline]
shrink_dentry_list+0x140/0x5d0 fs/dcache.c:1075
prune_dcache_sb+0xeb/0x150 fs/dcache.c:1156
super_cache_scan+0x32a/0x550 fs/super.c:221
do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435
shrink_slab_memcg mm/shrinker.c:548 [inline]
shrink_slab+0xa87/0x1310 mm/shrinker.c:626
shrink_one+0x493/0x7c0 mm/vmscan.c:4790
shrink_many mm/vmscan.c:4851 [inline]
lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951
shrink_node mm/vmscan.c:5910 [inline]
kswapd_shrink_node mm/vmscan.c:6720 [inline]
balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911
kswapd+0x5ea/0xbf0 mm/vmscan.c:7180
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
-> #0 (fs_reclaim){+.+.}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain kernel/locking/lockdep.c:3869 [inline]
__lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
__fs_reclaim_acquire mm/page_alloc.c:3801 [inline]
fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3891 [inline]
slab_alloc_node mm/slub.c:3981 [inline]
kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020
btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411
alloc_inode+0x5d/0x230 fs/inode.c:261
iget5_locked fs/inode.c:1235 [inline]
iget5_locked+0x1c9/0x2c0 fs/inode.c:1228
btrfs_iget_locked fs/btrfs/inode.c:5590 [inline]
btrfs_iget_path fs/btrfs/inode.c:5607 [inline]
btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636
add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline]
copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928
btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592
log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline]
btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718
btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline]
btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180
btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959
vfs_fsync_range+0x141/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2794 [inline]
btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705
do_iter_readv_writev+0x504/0x780 fs/read_write.c:741
vfs_writev+0x36f/0xde0 fs/read_write.c:971
do_pwritev+0x1b2/0x260 fs/read_write.c:1072
__do_compat_sys_pwritev2 fs/read_write.c:1218 [inline]
__se_compat_sys_pwritev2 fs/read_write.c:1210 [inline]
__ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
other info that might help us debug this:
Chain exists of:
fs_reclaim --> btrfs_trans_num_extwriters --> &ei->log_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ei->log_mutex);
lock(btrfs_trans_num_extwriters);
lock(&ei->log_mutex);
lock(fs_reclaim);
*** DEADLOCK ***
7 locks held by syz-executor.1/9919:
#0: ffff88802be20420 (sb_writers#23){.+.+}-{0:0}, at: do_pwritev+0x1b2/0x260 fs/read_write.c:1072
#1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: inode_lock include/linux/fs.h:791 [inline]
#1: ffff888065c0f8f0 (&sb->s_type->i_mutex_key#33){++++}-{3:3}, at: btrfs_inode_lock+0xc8/0x110 fs/btrfs/inode.c:385
#2: ffff888065c0f778 (&ei->i_mmap_lock){++++}-{3:3}, at: btrfs_inode_lock+0xee/0x110 fs/btrfs/inode.c:388
#3: ffff88802be20610 (sb_internal#4){.+.+}-{0:0}, at: btrfs_sync_file+0x95b/0xe10 fs/btrfs/file.c:1952
#4: ffff8880546323f0 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290
#5: ffff888054632418 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x430/0xf40 fs/btrfs/transaction.c:290
#6: ffff88804b569358 (&ei->log_mutex){+.+.}-{3:3}, at: btrfs_log_inode+0x39c/0x4660 fs/btrfs/tree-log.c:6481
stack backtrace:
CPU: 2 PID: 9919 Comm: syz-executor.1 Not tainted 6.10.0-rc2-syzkaller-00361-g061d1af7b030 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain kernel/locking/lockdep.c:3869 [inline]
__lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
__fs_reclaim_acquire mm/page_alloc.c:3801 [inline]
fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3815
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3891 [inline]
slab_alloc_node mm/slub.c:3981 [inline]
kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4020
btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411
alloc_inode+0x5d/0x230 fs/inode.c:261
iget5_locked fs/inode.c:1235 [inline]
iget5_locked+0x1c9/0x2c0 fs/inode.c:1228
btrfs_iget_locked fs/btrfs/inode.c:5590 [inline]
btrfs_iget_path fs/btrfs/inode.c:5607 [inline]
btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636
add_conflicting_inode fs/btrfs/tree-log.c:5657 [inline]
copy_inode_items_to_log+0x1039/0x1e30 fs/btrfs/tree-log.c:5928
btrfs_log_inode+0xa48/0x4660 fs/btrfs/tree-log.c:6592
log_new_delayed_dentries fs/btrfs/tree-log.c:6363 [inline]
btrfs_log_inode+0x27dd/0x4660 fs/btrfs/tree-log.c:6718
btrfs_log_all_parents fs/btrfs/tree-log.c:6833 [inline]
btrfs_log_inode_parent+0x22ba/0x2a90 fs/btrfs/tree-log.c:7141
btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7180
btrfs_sync_file+0x9c1/0xe10 fs/btrfs/file.c:1959
vfs_fsync_range+0x141/0x230 fs/sync.c:188
generic_write_sync include/linux/fs.h:2794 [inline]
btrfs_do_write_iter+0x584/0x10c0 fs/btrfs/file.c:1705
do_iter_readv_writev+0x504/0x780 fs/read_write.c:741
vfs_writev+0x36f/0xde0 fs/read_write.c:971
do_pwritev+0x1b2/0x260 fs/read_write.c:1072
__do_compat_sys_pwritev2 fs/read_write.c:1218 [inline]
__se_compat_sys_pwritev2 fs/read_write.c:1210 [inline]
__ia32_compat_sys_pwritev2+0x121/0x1b0 fs/read_write.c:1210
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
RIP: 0023:0xf7334579
Code: b8 01 10 06 03 (...)
RSP: 002b:00000000f5f265ac EFLAGS: 00000292 ORIG_RAX: 000000000000017b
RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000200002c0
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000292 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Fix this by ensuring we are under a NOFS scope whenever we call
btrfs_iget() during inode logging and log replay.
Reported-by: [email protected]
Link: https://lore.kernel.org/linux-btrfs/[email protected]/
Fixes: 712e36c ("btrfs: use GFP_KERNEL in btrfs_alloc_inode")
Reviewed-by: Johannes Thumshirn <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jul 10, 2024
Sebastian Andrzej Siewior says: ==================== net: bpf_net_context cleanups. a small series with bpf_net_context cleanups/ improvements. Jakub asked for #1 and #2 and while looking around I made #3. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jul 18, 2024
Since f663a03 ("bpf, x64: Remove tail call detection"), tail_call_reachable won't be detected in x86 JIT. And, tail_call_reachable is provided by verifier. Therefore, in test_bpf, the tail_call_reachable must be provided in test cases before running. Fix and test: [ 174.828662] test_bpf: #0 Tail call leaf jited:1 170 PASS [ 174.829574] test_bpf: #1 Tail call 2 jited:1 244 PASS [ 174.830363] test_bpf: #2 Tail call 3 jited:1 296 PASS [ 174.830924] test_bpf: #3 Tail call 4 jited:1 719 PASS [ 174.831863] test_bpf: #4 Tail call load/store leaf jited:1 197 PASS [ 174.832240] test_bpf: #5 Tail call load/store jited:1 326 PASS [ 174.832240] test_bpf: #6 Tail call error path, max count reached jited:1 2214 PASS [ 174.835713] test_bpf: #7 Tail call count preserved across function calls jited:1 609751 PASS [ 175.446098] test_bpf: #8 Tail call error path, NULL target jited:1 472 PASS [ 175.447597] test_bpf: #9 Tail call error path, index out of range jited:1 206 PASS [ 175.448833] test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Fixes: f663a03 ("bpf, x64: Remove tail call detection") Signed-off-by: Leon Hwang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Jul 18, 2024
Bos can be put with multiple unrelated dma-resv locks held. But imported bos attempt to grab the bo dma-resv during dma-buf detach that typically happens during cleanup. That leads to lockde splats similar to the below and a potential ABBA deadlock. Fix this by always taking the delayed workqueue cleanup path for imported bos. Requesting stable fixes from when the Xe driver was introduced, since its usage of drm_exec and wide vm dma_resvs appear to be the first reliable trigger of this. [22982.116427] ============================================ [22982.116428] WARNING: possible recursive locking detected [22982.116429] 6.10.0-rc2+ #10 Tainted: G U W [22982.116430] -------------------------------------------- [22982.116430] glxgears:sh0/5785 is trying to acquire lock: [22982.116431] ffff8c2bafa539a8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: dma_buf_detach+0x3b/0xf0 [22982.116438] but task is already holding lock: [22982.116438] ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116442] other info that might help us debug this: [22982.116442] Possible unsafe locking scenario: [22982.116443] CPU0 [22982.116444] ---- [22982.116444] lock(reservation_ww_class_mutex); [22982.116445] lock(reservation_ww_class_mutex); [22982.116447] *** DEADLOCK *** [22982.116447] May be due to missing lock nesting notation [22982.116448] 5 locks held by glxgears:sh0/5785: [22982.116449] #0: ffff8c2d9aba58c8 (&xef->vm.lock){+.+.}-{3:3}, at: xe_file_close+0xde/0x1c0 [xe] [22982.116507] #1: ffff8c2e28cc8480 (&vm->lock){++++}-{3:3}, at: xe_vm_close_and_put+0x161/0x9b0 [xe] [22982.116578] #2: ffff8c2e31982970 (&val->lock){.+.+}-{3:3}, at: xe_validation_ctx_init+0x6d/0x70 [xe] [22982.116647] #3: ffffacdc469478a8 (reservation_ww_class_acquire){+.+.}-{0:0}, at: xe_vma_destroy_unlocked+0x7f/0xe0 [xe] [22982.116716] #4: ffff8c2d9aba6da8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: drm_exec_lock_obj+0x49/0x2b0 [drm_exec] [22982.116719] stack backtrace: [22982.116720] CPU: 8 PID: 5785 Comm: glxgears:sh0 Tainted: G U W 6.10.0-rc2+ #10 [22982.116721] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [22982.116723] Call Trace: [22982.116724] <TASK> [22982.116725] dump_stack_lvl+0x77/0xb0 [22982.116727] __lock_acquire+0x1232/0x2160 [22982.116730] lock_acquire+0xcb/0x2d0 [22982.116732] ? dma_buf_detach+0x3b/0xf0 [22982.116734] ? __lock_acquire+0x417/0x2160 [22982.116736] __ww_mutex_lock.constprop.0+0xd0/0x13b0 [22982.116738] ? dma_buf_detach+0x3b/0xf0 [22982.116741] ? dma_buf_detach+0x3b/0xf0 [22982.116743] ? ww_mutex_lock+0x2b/0x90 [22982.116745] ww_mutex_lock+0x2b/0x90 [22982.116747] dma_buf_detach+0x3b/0xf0 [22982.116749] drm_prime_gem_destroy+0x2f/0x40 [drm] [22982.116775] xe_ttm_bo_destroy+0x32/0x220 [xe] [22982.116818] ? __mutex_unlock_slowpath+0x3a/0x290 [22982.116821] drm_exec_unlock_all+0xa1/0xd0 [drm_exec] [22982.116823] drm_exec_fini+0x12/0xb0 [drm_exec] [22982.116824] xe_validation_ctx_fini+0x15/0x40 [xe] [22982.116892] xe_vma_destroy_unlocked+0xb1/0xe0 [xe] [22982.116959] xe_vm_close_and_put+0x41a/0x9b0 [xe] [22982.117025] ? xa_find+0xe3/0x1e0 [22982.117028] xe_file_close+0x10a/0x1c0 [xe] [22982.117074] drm_file_free+0x22a/0x280 [drm] [22982.117099] drm_release_noglobal+0x22/0x70 [drm] [22982.117119] __fput+0xf1/0x2d0 [22982.117122] task_work_run+0x59/0x90 [22982.117125] do_exit+0x330/0xb40 [22982.117127] do_group_exit+0x36/0xa0 [22982.117129] get_signal+0xbd2/0xbe0 [22982.117131] arch_do_signal_or_restart+0x3e/0x240 [22982.117134] syscall_exit_to_user_mode+0x1e7/0x290 [22982.117137] do_syscall_64+0xa1/0x180 [22982.117139] ? lock_acquire+0xcb/0x2d0 [22982.117140] ? __set_task_comm+0x28/0x1e0 [22982.117141] ? find_held_lock+0x2b/0x80 [22982.117144] ? __set_task_comm+0xe1/0x1e0 [22982.117145] ? lock_release+0xca/0x290 [22982.117147] ? __do_sys_prctl+0x245/0xab0 [22982.117149] ? lockdep_hardirqs_on_prepare+0xde/0x190 [22982.117150] ? syscall_exit_to_user_mode+0xb0/0x290 [22982.117152] ? do_syscall_64+0xa1/0x180 [22982.117154] ? __lock_acquire+0x417/0x2160 [22982.117155] ? reacquire_held_locks+0xd1/0x1f0 [22982.117156] ? do_user_addr_fault+0x30c/0x790 [22982.117158] ? lock_acquire+0xcb/0x2d0 [22982.117160] ? find_held_lock+0x2b/0x80 [22982.117162] ? do_user_addr_fault+0x357/0x790 [22982.117163] ? lock_release+0xca/0x290 [22982.117164] ? do_user_addr_fault+0x361/0x790 [22982.117166] ? trace_hardirqs_off+0x4b/0xc0 [22982.117168] ? clear_bhb_loop+0x45/0xa0 [22982.117170] ? clear_bhb_loop+0x45/0xa0 [22982.117172] ? clear_bhb_loop+0x45/0xa0 [22982.117174] entry_SYSCALL_64_after_hwframe+0x76/0x7e [22982.117176] RIP: 0033:0x7f943d267169 [22982.117192] Code: Unable to access opcode bytes at 0x7f943d26713f. [22982.117193] RSP: 002b:00007f9430bffc80 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca [22982.117195] RAX: fffffffffffffe00 RBX: 0000000000000000 RCX: 00007f943d267169 [22982.117196] RDX: 0000000000000000 RSI: 0000000000000189 RDI: 00005622f89579d0 [22982.117197] RBP: 00007f9430bffcb0 R08: 0000000000000000 R09: 00000000ffffffff [22982.117198] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [22982.117199] R13: 0000000000000000 R14: 0000000000000000 R15: 00005622f89579d0 [22982.117202] </TASK> Fixes: dd08ebf ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Christian König <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v6.8+ Signed-off-by: Thomas Hellström <[email protected]> Reviewed-by: Matthew Brost <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
BluezTestBot
pushed a commit
that referenced
this issue
Jul 18, 2024
When putting an inode during extent map shrinking we're doing a standard
iput() but that may take a long time in case the inode is dirty and we are
doing the final iput that triggers eviction - the VFS will have to wait
for writeback before calling the btrfs evict callback (see
fs/inode.c:evict()).
This slows down the task running the shrinker which may have been
triggered while updating some tree for example, meaning locks are held
as well as an open transaction handle.
Also if the iput() ends up triggering eviction and the inode has no links
anymore, then we trigger item truncation which requires flushing delayed
items, space reservation to start a transaction and that may trigger the
space reclaim task and wait for it, resulting in deadlocks in case the
reclaim task needs for example to commit a transaction and the shrinker
is being triggered from a path holding a transaction handle.
Syzbot reported such a case with the following stack traces:
======================================================
WARNING: possible circular locking dependency detected
6.10.0-rc2-syzkaller-00010-g2ab795141095 #0 Not tainted
------------------------------------------------------
kswapd0/111 is trying to acquire lock:
ffff88801eae4610 (sb_internal#3){.+.+}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275
but task is already holding lock:
ffffffff8dd3a9a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xa88/0x1970 mm/vmscan.c:6924
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (fs_reclaim){+.+.}-{0:0}:
__fs_reclaim_acquire mm/page_alloc.c:3783 [inline]
fs_reclaim_acquire+0x102/0x160 mm/page_alloc.c:3797
might_alloc include/linux/sched/mm.h:334 [inline]
slab_pre_alloc_hook mm/slub.c:3890 [inline]
slab_alloc_node mm/slub.c:3980 [inline]
kmem_cache_alloc_lru_noprof+0x58/0x2f0 mm/slub.c:4019
btrfs_alloc_inode+0x118/0xb20 fs/btrfs/inode.c:8411
alloc_inode+0x5d/0x230 fs/inode.c:261
iget5_locked fs/inode.c:1235 [inline]
iget5_locked+0x1c9/0x2c0 fs/inode.c:1228
btrfs_iget_locked fs/btrfs/inode.c:5590 [inline]
btrfs_iget_path fs/btrfs/inode.c:5607 [inline]
btrfs_iget+0xfb/0x230 fs/btrfs/inode.c:5636
create_reloc_inode+0x403/0x820 fs/btrfs/relocation.c:3911
btrfs_relocate_block_group+0x471/0xe60 fs/btrfs/relocation.c:4114
btrfs_relocate_chunk+0x143/0x450 fs/btrfs/volumes.c:3373
__btrfs_balance fs/btrfs/volumes.c:4157 [inline]
btrfs_balance+0x211a/0x3f00 fs/btrfs/volumes.c:4534
btrfs_ioctl_balance fs/btrfs/ioctl.c:3675 [inline]
btrfs_ioctl+0x12ed/0x8290 fs/btrfs/ioctl.c:4742
__do_compat_sys_ioctl+0x2c3/0x330 fs/ioctl.c:1007
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #2 (btrfs_trans_num_extwriters){++++}-{0:0}:
join_transaction+0x164/0xf40 fs/btrfs/transaction.c:315
start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700
btrfs_rebuild_free_space_tree+0xaa/0x480 fs/btrfs/free-space-tree.c:1323
btrfs_start_pre_rw_mount+0x218/0xf60 fs/btrfs/disk-io.c:2999
open_ctree+0x41ab/0x52e0 fs/btrfs/disk-io.c:3554
btrfs_fill_super fs/btrfs/super.c:946 [inline]
btrfs_get_tree_super fs/btrfs/super.c:1863 [inline]
btrfs_get_tree+0x11e9/0x1b90 fs/btrfs/super.c:2089
vfs_get_tree+0x8f/0x380 fs/super.c:1780
fc_mount+0x16/0xc0 fs/namespace.c:1125
btrfs_get_tree_subvol fs/btrfs/super.c:2052 [inline]
btrfs_get_tree+0xa53/0x1b90 fs/btrfs/super.c:2090
vfs_get_tree+0x8f/0x380 fs/super.c:1780
do_new_mount fs/namespace.c:3352 [inline]
path_mount+0x6e1/0x1f10 fs/namespace.c:3679
do_mount fs/namespace.c:3692 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount fs/namespace.c:3875 [inline]
__ia32_sys_mount+0x295/0x320 fs/namespace.c:3875
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #1 (btrfs_trans_num_writers){++++}-{0:0}:
join_transaction+0x148/0xf40 fs/btrfs/transaction.c:314
start_transaction+0x427/0x1a70 fs/btrfs/transaction.c:700
btrfs_rebuild_free_space_tree+0xaa/0x480 fs/btrfs/free-space-tree.c:1323
btrfs_start_pre_rw_mount+0x218/0xf60 fs/btrfs/disk-io.c:2999
open_ctree+0x41ab/0x52e0 fs/btrfs/disk-io.c:3554
btrfs_fill_super fs/btrfs/super.c:946 [inline]
btrfs_get_tree_super fs/btrfs/super.c:1863 [inline]
btrfs_get_tree+0x11e9/0x1b90 fs/btrfs/super.c:2089
vfs_get_tree+0x8f/0x380 fs/super.c:1780
fc_mount+0x16/0xc0 fs/namespace.c:1125
btrfs_get_tree_subvol fs/btrfs/super.c:2052 [inline]
btrfs_get_tree+0xa53/0x1b90 fs/btrfs/super.c:2090
vfs_get_tree+0x8f/0x380 fs/super.c:1780
do_new_mount fs/namespace.c:3352 [inline]
path_mount+0x6e1/0x1f10 fs/namespace.c:3679
do_mount fs/namespace.c:3692 [inline]
__do_sys_mount fs/namespace.c:3898 [inline]
__se_sys_mount fs/namespace.c:3875 [inline]
__ia32_sys_mount+0x295/0x320 fs/namespace.c:3875
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
-> #0 (sb_internal#3){.+.+}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain kernel/locking/lockdep.c:3869 [inline]
__lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write include/linux/fs.h:1655 [inline]
sb_start_intwrite include/linux/fs.h:1838 [inline]
start_transaction+0xbc1/0x1a70 fs/btrfs/transaction.c:694
btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275
btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291
evict+0x2ed/0x6c0 fs/inode.c:667
iput_final fs/inode.c:1741 [inline]
iput.part.0+0x5a8/0x7f0 fs/inode.c:1767
iput+0x5c/0x80 fs/inode.c:1757
btrfs_scan_root fs/btrfs/extent_map.c:1118 [inline]
btrfs_free_extent_maps+0xbd3/0x1320 fs/btrfs/extent_map.c:1189
super_cache_scan+0x409/0x550 fs/super.c:227
do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435
shrink_slab+0x18a/0x1310 mm/shrinker.c:662
shrink_one+0x493/0x7c0 mm/vmscan.c:4790
shrink_many mm/vmscan.c:4851 [inline]
lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951
shrink_node mm/vmscan.c:5910 [inline]
kswapd_shrink_node mm/vmscan.c:6720 [inline]
balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911
kswapd+0x5ea/0xbf0 mm/vmscan.c:7180
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
other info that might help us debug this:
Chain exists of:
sb_internal#3 --> btrfs_trans_num_extwriters --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(btrfs_trans_num_extwriters);
lock(fs_reclaim);
rlock(sb_internal#3);
*** DEADLOCK ***
2 locks held by kswapd0/111:
#0: ffffffff8dd3a9a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0xa88/0x1970 mm/vmscan.c:6924
#1: ffff88801eae40e0 (&type->s_umount_key#62){++++}-{3:3}, at: super_trylock_shared fs/super.c:562 [inline]
#1: ffff88801eae40e0 (&type->s_umount_key#62){++++}-{3:3}, at: super_cache_scan+0x96/0x550 fs/super.c:196
stack backtrace:
CPU: 0 PID: 111 Comm: kswapd0 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
check_noncircular+0x31a/0x400 kernel/locking/lockdep.c:2187
check_prev_add kernel/locking/lockdep.c:3134 [inline]
check_prevs_add kernel/locking/lockdep.c:3253 [inline]
validate_chain kernel/locking/lockdep.c:3869 [inline]
__lock_acquire+0x2478/0x3b30 kernel/locking/lockdep.c:5137
lock_acquire kernel/locking/lockdep.c:5754 [inline]
lock_acquire+0x1b1/0x560 kernel/locking/lockdep.c:5719
percpu_down_read include/linux/percpu-rwsem.h:51 [inline]
__sb_start_write include/linux/fs.h:1655 [inline]
sb_start_intwrite include/linux/fs.h:1838 [inline]
start_transaction+0xbc1/0x1a70 fs/btrfs/transaction.c:694
btrfs_commit_inode_delayed_inode+0x110/0x330 fs/btrfs/delayed-inode.c:1275
btrfs_evict_inode+0x960/0xe80 fs/btrfs/inode.c:5291
evict+0x2ed/0x6c0 fs/inode.c:667
iput_final fs/inode.c:1741 [inline]
iput.part.0+0x5a8/0x7f0 fs/inode.c:1767
iput+0x5c/0x80 fs/inode.c:1757
btrfs_scan_root fs/btrfs/extent_map.c:1118 [inline]
btrfs_free_extent_maps+0xbd3/0x1320 fs/btrfs/extent_map.c:1189
super_cache_scan+0x409/0x550 fs/super.c:227
do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435
shrink_slab+0x18a/0x1310 mm/shrinker.c:662
shrink_one+0x493/0x7c0 mm/vmscan.c:4790
shrink_many mm/vmscan.c:4851 [inline]
lru_gen_shrink_node+0x89f/0x1750 mm/vmscan.c:4951
shrink_node mm/vmscan.c:5910 [inline]
kswapd_shrink_node mm/vmscan.c:6720 [inline]
balance_pgdat+0x1105/0x1970 mm/vmscan.c:6911
kswapd+0x5ea/0xbf0 mm/vmscan.c:7180
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
So fix this by using btrfs_add_delayed_iput() so that the final iput is
delegated to the cleaner kthread.
Link: https://lore.kernel.org/linux-btrfs/[email protected]/
Reported-by: [email protected]
Fixes: 956a17d ("btrfs: add a shrinker for extent maps")
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Aug 23, 2024
Lockdep reported a warning in Linux version 6.6: [ 414.344659] ================================ [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.356863] scsi_io_completion+0x177/0x1610 [ 414.357379] scsi_complete+0x12f/0x260 [ 414.357856] blk_complete_reqs+0xba/0xf0 [ 414.358338] __do_softirq+0x1b0/0x7a2 [ 414.358796] irq_exit_rcu+0x14b/0x1a0 [ 414.359262] sysvec_call_function_single+0xaf/0xc0 [ 414.359828] asm_sysvec_call_function_single+0x1a/0x20 [ 414.360426] default_idle+0x1e/0x30 [ 414.360873] default_idle_call+0x9b/0x1f0 [ 414.361390] do_idle+0x2d2/0x3e0 [ 414.361819] cpu_startup_entry+0x55/0x60 [ 414.362314] start_secondary+0x235/0x2b0 [ 414.362809] secondary_startup_64_no_verify+0x18f/0x19b [ 414.363413] irq event stamp: 428794 [ 414.363825] hardirqs last enabled at (428793): [<ffffffff816bfd1c>] ktime_get+0x1dc/0x200 [ 414.364694] hardirqs last disabled at (428794): [<ffffffff85470177>] _raw_spin_lock_irq+0x47/0x50 [ 414.365629] softirqs last enabled at (428444): [<ffffffff85474780>] __do_softirq+0x540/0x7a2 [ 414.366522] softirqs last disabled at (428419): [<ffffffff813f65ab>] irq_exit_rcu+0x14b/0x1a0 [ 414.367425] other info that might help us debug this: [ 414.368194] Possible unsafe locking scenario: [ 414.368900] CPU0 [ 414.369225] ---- [ 414.369548] lock(&sbq->ws[i].wait); [ 414.370000] <Interrupt> [ 414.370342] lock(&sbq->ws[i].wait); [ 414.370802] *** DEADLOCK *** [ 414.371569] 5 locks held by kworker/u10:3/1152: [ 414.372088] #0: ffff88810130e938 ((wq_completion)writeback){+.+.}-{0:0}, at: process_scheduled_works+0x357/0x13f0 [ 414.373180] #1: ffff88810201fdb8 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x3a3/0x13f0 [ 414.374384] #2: ffffffff86ffbdc0 (rcu_read_lock){....}-{1:2}, at: blk_mq_run_hw_queue+0x637/0xa00 [ 414.375342] #3: ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.376377] #4: ffff888106205a08 (&hctx->dispatch_wait_lock){+.-.}-{2:2}, at: blk_mq_dispatch_rq_list+0x1337/0x1ee0 [ 414.378607] stack backtrace: [ 414.379177] CPU: 0 PID: 1152 Comm: kworker/u10:3 Not tainted 6.6.0-07439-gba2303cacfda #6 [ 414.380032] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 414.381177] Workqueue: writeback wb_workfn (flush-253:0) [ 414.381805] Call Trace: [ 414.382136] <TASK> [ 414.382429] dump_stack_lvl+0x91/0xf0 [ 414.382884] mark_lock_irq+0xb3b/0x1260 [ 414.383367] ? __pfx_mark_lock_irq+0x10/0x10 [ 414.383889] ? stack_trace_save+0x8e/0xc0 [ 414.384373] ? __pfx_stack_trace_save+0x10/0x10 [ 414.384903] ? graph_lock+0xcf/0x410 [ 414.385350] ? save_trace+0x3d/0xc70 [ 414.385808] mark_lock.part.20+0x56d/0xa90 [ 414.386317] mark_held_locks+0xb0/0x110 [ 414.386791] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.387320] lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.387901] ? _raw_spin_unlock_irq+0x28/0x50 [ 414.388422] trace_hardirqs_on+0x58/0x100 [ 414.388917] _raw_spin_unlock_irq+0x28/0x50 [ 414.389422] __blk_mq_tag_busy+0x1d6/0x2a0 [ 414.389920] __blk_mq_get_driver_tag+0x761/0x9f0 [ 414.390899] blk_mq_dispatch_rq_list+0x1780/0x1ee0 [ 414.391473] ? __pfx_blk_mq_dispatch_rq_list+0x10/0x10 [ 414.392070] ? sbitmap_get+0x2b8/0x450 [ 414.392533] ? __blk_mq_get_driver_tag+0x210/0x9f0 [ 414.393095] __blk_mq_sched_dispatch_requests+0xd99/0x1690 [ 414.393730] ? elv_attempt_insert_merge+0x1b1/0x420 [ 414.394302] ? __pfx___blk_mq_sched_dispatch_requests+0x10/0x10 [ 414.394970] ? lock_acquire+0x18d/0x460 [ 414.395456] ? blk_mq_run_hw_queue+0x637/0xa00 [ 414.395986] ? __pfx_lock_acquire+0x10/0x10 [ 414.396499] blk_mq_sched_dispatch_requests+0x109/0x190 [ 414.397100] blk_mq_run_hw_queue+0x66e/0xa00 [ 414.397616] blk_mq_flush_plug_list.part.17+0x614/0x2030 [ 414.398244] ? __pfx_blk_mq_flush_plug_list.part.17+0x10/0x10 [ 414.398897] ? writeback_sb_inodes+0x241/0xcc0 [ 414.399429] blk_mq_flush_plug_list+0x65/0x80 [ 414.399957] __blk_flush_plug+0x2f1/0x530 [ 414.400458] ? __pfx___blk_flush_plug+0x10/0x10 [ 414.400999] blk_finish_plug+0x59/0xa0 [ 414.401467] wb_writeback+0x7cc/0x920 [ 414.401935] ? __pfx_wb_writeback+0x10/0x10 [ 414.402442] ? mark_held_locks+0xb0/0x110 [ 414.402931] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.403462] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.404062] wb_workfn+0x2b3/0xcf0 [ 414.404500] ? __pfx_wb_workfn+0x10/0x10 [ 414.404989] process_scheduled_works+0x432/0x13f0 [ 414.405546] ? __pfx_process_scheduled_works+0x10/0x10 [ 414.406139] ? do_raw_spin_lock+0x101/0x2a0 [ 414.406641] ? assign_work+0x19b/0x240 [ 414.407106] ? lock_is_held_type+0x9d/0x110 [ 414.407604] worker_thread+0x6f2/0x1160 [ 414.408075] ? __kthread_parkme+0x62/0x210 [ 414.408572] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.409168] ? __kthread_parkme+0x13c/0x210 [ 414.409678] ? __pfx_worker_thread+0x10/0x10 [ 414.410191] kthread+0x33c/0x440 [ 414.410602] ? __pfx_kthread+0x10/0x10 [ 414.411068] ret_from_fork+0x4d/0x80 [ 414.411526] ? __pfx_kthread+0x10/0x10 [ 414.411993] ret_from_fork_asm+0x1b/0x30 [ 414.412489] </TASK> When interrupt is turned on while a lock holding by spin_lock_irq it throws a warning because of potential deadlock. blk_mq_prep_dispatch_rq blk_mq_get_driver_tag __blk_mq_get_driver_tag __blk_mq_alloc_driver_tag blk_mq_tag_busy -> tag is already busy // failed to get driver tag blk_mq_mark_tag_wait spin_lock_irq(&wq->lock) -> lock A (&sbq->ws[i].wait) __add_wait_queue(wq, wait) -> wait queue active blk_mq_get_driver_tag __blk_mq_tag_busy -> 1) tag must be idle, which means there can't be inflight IO spin_lock_irq(&tags->lock) -> lock B (hctx->tags) spin_unlock_irq(&tags->lock) -> unlock B, turn on interrupt accidentally -> 2) context must be preempt by IO interrupt to trigger deadlock. As shown above, the deadlock is not possible in theory, but the warning still need to be fixed. Fix it by using spin_lock_irqsave to get lockB instead of spin_lock_irq. Fixes: 4f1731d ("blk-mq: fix potential io hang by wrong 'wake_batch'") Signed-off-by: Li Lingfeng <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Yu Kuai <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Aug 23, 2024
Ido Schimmel says: ==================== Preparations for FIB rule DSCP selector This patchset moves the masking of the upper DSCP bits in 'flowi4_tos' to the core instead of relying on callers of the FIB lookup API to do it. This will allow us to start changing users of the API to initialize the 'flowi4_tos' field with all six bits of the DSCP field. In turn, this will allow us to extend FIB rules with a new DSCP selector. By masking the upper DSCP bits in the core we are able to maintain the behavior of the TOS selector in FIB rules and routes to only match on the lower DSCP bits. While working on this I found two users of the API that do not mask the upper DSCP bits before performing the lookup. The first is an ancient netlink family that is unlikely to be used. It is adjusted in patch #1 to mask both the upper DSCP bits and the ECN bits before calling the API. The second user is a nftables module that differs in this regard from its equivalent iptables module. It is adjusted in patch #2 to invoke the API with the upper DSCP bits masked, like all other callers. The relevant selftest passed, but in the unlikely case that regressions are reported because of this change, we can restore the existing behavior using a new flow information flag as discussed here [1]. The last patch moves the masking of the upper DSCP bits to the core, making the first two patches redundant, but I wanted to post them separately to call attention to the behavior change for these two users of the FIB lookup API. Future patchsets (around 3) will start unmasking the upper DSCP bits throughout the networking stack before adding support for the new FIB rule DSCP selector. Changes from v1 [2]: Patch #3: Include <linux/ip.h> in <linux/in_route.h> instead of including it in net/ip_fib.h [1] https://lore.kernel.org/netdev/ZpqpB8vJU%2FQ6LSqa@debian/ [2] https://lore.kernel.org/netdev/[email protected]/ ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Aug 23, 2024
…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 disable BH when collecting stats via hardware offload to ensure concurrent updates from packet path do not result in losing stats. From Sebastian Andrzej Siewior. Patch #2 uses write seqcount to reset counters serialize against reader. Also from Sebastian Andrzej Siewior. Patch #3 ensures vlan header is in place before accessing its fields, according to KMSAN splat triggered by syzbot. * tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: flowtable: validate vlan header netfilter: nft_counter: Synchronize nft_counter_reset() against reader. netfilter: nft_counter: Disable BH in nft_counter_offload_stats(). ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Sep 12, 2024
…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following batch contains Netfilter updates for net-next: Patch #1 fix checksum calculation in nfnetlink_queue with SCTP, segment GSO packet since skb_zerocopy() does not support GSO_BY_FRAGS, from Antonio Ojea. Patch #2 extend nfnetlink_queue coverage to handle SCTP packets, from Antonio Ojea. Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink, from Donald Hunter. Patch #4 adds a dedicate commit list for sets to speed up intra-transaction lookups, from Florian Westphal. Patch #5 skips removal of element from abort path for the pipapo backend, ditching the shadow copy of this datastructure is sufficient. Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to let users of conncoiunt decide when to enable conntrack, this is needed by openvswitch, from Xin Long. Patch #7 pass context to all nft_parse_register_load() in preparation for the next patch. Patches #8 and #9 reject loads from uninitialized registers from control plane to remove register initialization from datapath. From Florian Westphal. * tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: don't initialize registers in nft_do_chain() netfilter: nf_tables: allow loads only when register is initialized netfilter: nf_tables: pass context structure to nft_parse_register_load netfilter: move nf_ct_netns_get out of nf_conncount_init netfilter: nf_tables: do not remove elements if set backend implements .abort netfilter: nf_tables: store new sets in dedicated list netfilter: nfnetlink: convert kfree_skb to consume_skb selftests: netfilter: nft_queue.sh: sctp coverage netfilter: nfnetlink_queue: unbreak SCTP traffic ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Sep 12, 2024
Ido Schimmel says:
====================
Unmask upper DSCP bits - part 2
tl;dr - This patchset continues to unmask the upper DSCP bits in the
IPv4 flow key in preparation for allowing IPv4 FIB rules to match on
DSCP. No functional changes are expected. Part 1 was merged in commit
("Merge branch 'unmask-upper-dscp-bits-part-1'").
The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB
lookup to match against the TOS selector in FIB rules and routes.
It is currently impossible for user space to configure FIB rules that
match on the DSCP value as the upper DSCP bits are either masked in the
various call sites that initialize the IPv4 flow key or along the path
to the FIB core.
In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we
need to make sure the entire DSCP value is present in the IPv4 flow key.
This patchset continues to unmask the upper DSCP bits, but this time in
the output route path.
Patches #1-#3 unmask the upper DSCP bits in the various places that
invoke the core output route lookup functions directly.
Patches #4-#6 do the same in three helpers that are widely used in the
output path to initialize the TOS field in the IPv4 flow key.
The rest of the patches continue to unmask these bits in call sites that
invoke the following wrappers around the core lookup functions:
Patch #7 - __ip_route_output_key()
Patches #8-#12 - ip_route_output_flow()
The next patchset will handle the callers of ip_route_output_ports() and
ip_route_output_key().
No functional changes are expected as commit 1fa3314 ("ipv4:
Centralize TOS matching") moved the masking of the upper DSCP bits to
the core where 'flowi4_tos' is matched against the TOS selector.
Changes since v1 [1]:
* Remove IPTOS_RT_MASK in patch #7 instead of in patch #6
[1] https://lore.kernel.org/netdev/[email protected]/
====================
Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Sep 12, 2024
Daniel Machon says: ==================== net: microchip: add FDMA library and use it for Sparx5 This patch series is the first of a 2-part series, that adds a new common FDMA library for Microchip switch chips Sparx5 and lan966x. These chips share the same FDMA engine, and as such will benefit from a common library with a common implementation. This also has the benefit of removing a lot open-coded bookkeeping and duplicate code for the two drivers. Additionally, upstreaming efforts for a third chip, lan969x, will begin in the near future. This chip will use the new library too. In this first series, the FDMA library is introduced and used by the Sparx5 switch driver. ################### # Example of use: # ################### - Initialize the rx and tx fdma structs with values for: number of DCB's, number of DB's, channel ID, DB size (data buffer size), and total size of the requested memory. Also provide two callbacks: nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr. - Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent(). - Initialize the DCB's with fdma_dcb_init(). - Add new DCB's with fdma_dcb_add(). - Free memory with fdma_free_phys() or fdma_free_coherent(). ##################### # Patch breakdown: # ##################### Patch #1: introduces library and selects it for Sparx5. Patch #2: includes the fdma_api.h header and removes old symbols. Patch #3: replaces old rx and tx variables with equivalent ones from the fdma struct. Only the variables that can be changed without breaking traffic is changed in this patch. Patch #4: uses the library for allocation of rx buffers. This requires quite a bit of refactoring in this single patch. Patch #5: uses the library for adding DCB's in the rx path. Patch #6: uses the library for freeing rx buffers. Patch #7: uses the library helpers in the rx path. Patch #8: uses the library for allocation of tx buffers. This requires quite a bit of refactoring in this single patch. Patch #9: uses the library for adding DCB's in the tx path. Patch #10: uses the library helpers in the tx path. Patch #11: ditches the existing linked list for storing buffer addresses, and instead uses offsets into contiguous memory. Patch #12: modifies existing rx and tx functions to be direction independent. ==================== Signed-off-by: David S. Miller <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Sep 12, 2024
…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 adds ctnetlink support for kernel side filtering for deletions, from Changliang Wu. Patch #2 updates nft_counter support to Use u64_stats_t, from Sebastian Andrzej Siewior. Patch #3 uses kmemdup_array() in all xtables frontends, from Yan Zhen. Patch #4 is a oneliner to use ERR_CAST() in nf_conntrack instead opencoded casting, from Shen Lichuan. Patch #5 removes unused argument in nftables .validate interface, from Florian Westphal. Patch #6 is a oneliner to correct a typo in nftables kdoc, from Simon Horman. Patch #7 fixes missing kdoc in nftables, also from Simon. Patch #8 updates nftables to handle timeout less than CONFIG_HZ. Patch #9 rejects element expiration if timeout is zero, otherwise it is silently ignored. Patch #10 disallows element expiration larger than timeout. Patch #11 removes unnecessary READ_ONCE annotation while mutex is held. Patch #12 adds missing READ_ONCE/WRITE_ONCE annotation in dynset. Patch #13 annotates data-races around element expiration. Patch #14 allocates timeout and expiration in one single set element extension, they are tighly couple, no reason to keep them separated anymore. Patch #15 updates nftables to interpret zero timeout element as never times out. Note that it is already possible to declare sets with elements that never time out but this generalizes to all kind of set with timeouts. Patch #16 supports for element timeout and expiration updates. * tag 'nf-next-24-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: set element timeout update support netfilter: nf_tables: zero timeout means element never times out netfilter: nf_tables: consolidate timeout extension for elements netfilter: nf_tables: annotate data-races around element expiration netfilter: nft_dynset: annotate data-races around set timeout netfilter: nf_tables: remove annotation to access set timeout while holding lock netfilter: nf_tables: reject expiration higher than timeout netfilter: nf_tables: reject element expiration with no timeout netfilter: nf_tables: elements with timeout below CONFIG_HZ never expire netfilter: nf_tables: Add missing Kernel doc netfilter: nf_tables: Correct spelling in nf_tables.h netfilter: nf_tables: drop unused 3rd argument from validate callback ops netfilter: conntrack: Convert to use ERR_CAST() netfilter: Use kmemdup_array instead of kmemdup for multiple allocation netfilter: nft_counter: Use u64_stats_t for statistic. netfilter: ctnetlink: support CTA_FILTER for flush ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
BluezTestBot
pushed a commit
that referenced
this issue
Sep 12, 2024
Daniel Machon says: ==================== net: lan966x: use the newly introduced FDMA library This patch series is the second of a 2-part series [1], that adds a new common FDMA library for Microchip switch chips Sparx5 and lan966x. These chips share the same FDMA engine, and as such will benefit from a common library with a common implementation. This also has the benefit of removing a lot of open-coded bookkeeping and duplicate code for the two drivers. In this second series, the FDMA library will be taken into use by the lan966x switch driver. ################### # Example of use: # ################### - Initialize the rx and tx fdma structs with values for: number of DCB's, number of DB's, channel ID, DB size (data buffer size), and total size of the requested memory. Also provide two callbacks: nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr. - Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent(). - Initialize the DCB's with fdma_dcb_init(). - Add new DCB's with fdma_dcb_add(). - Free memory with fdma_free_phys() or fdma_free_coherent(). ##################### # Patch breakdown: # ##################### Patch #1: select FDMA library for lan966x. Patch #2: includes the fdma_api.h header and removes old symbols. Patch #3: replaces old rx and tx variables with equivalent ones from the fdma struct. Only the variables that can be changed without breaking traffic is changed in this patch. Patch #4: uses the library for allocation of rx buffers. This requires quite a bit of refactoring in this single patch. Patch #5: uses the library for adding DCB's in the rx path. Patch #6: uses the library for freeing rx buffers. Patch #7: uses the library for allocation of tx buffers. This requires quite a bit of refactoring in this single patch. Patch #8: uses the library for adding DCB's in the tx path. Patch #9: uses the library helpers in the tx path. Patch #10: ditch last_in_use variable and use library instead. Patch #11: uses library helpers throughout. Patch #12: refactor lan966x_fdma_reload() function. [1] https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Daniel Machon <[email protected]> ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hello,
syzbot found the following issue on:
HEAD commit: 280d542 Merge tag 'drm-fixes-2021-03-05' of git://anongit..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=14f818a2d00000
kernel config: https://syzkaller.appspot.com/x/.config?x=2d28ee81eb70698
dashboard link: https://syzkaller.appspot.com/bug?extid=1e678fbc60167d46f2a5
compiler: Debian clang version 11.0.1-2
Unfortunately, I don't have any reproducer for this issue yet.
IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: [email protected]
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at [email protected].
syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
The text was updated successfully, but these errors were encountered: