Skip to content

Latest commit

 

History

History
34 lines (23 loc) · 1.95 KB

README.md

File metadata and controls

34 lines (23 loc) · 1.95 KB
Raw

RISC-V Debug System Wrapper Technical Specification

rv_dm:

Overview

This document specifies the RISC-V Debug System wrapper functionality.

Features

The debug system follows the execution-based debug approach described in the RISC-V Debug Specification 0.13.2 and provides the following features.

  • JTAG Test Access Port (TAP)
  • Run-control debug features (in cooperation with the CPU core), including breakpoints, single-stepping through code, and reading core registers
  • System Bus Access (SBA): Access to arbitrary bus-attached peripherals through JTAG
  • Compatible with RISC-V Debug Specification 0.13-compliant debug software, including OpenOCD and GDB
  • TileLink Uncached Light (TL-UL) bus interfaces

Description

This module provides a RISC-V Debug Specification-compliant debug system with TileLink Uncached Light bus interfaces. The main functionality is provided by the PULP RISC-V Debug System, which is instantiated by this module. All bus interfaces are converted into TL-UL.

See the PULP RISC-V Debug System Documentation for a full list of features and further design documentation. This document only describes the additional logic provided on top of the PULP RISC-V Debug System.

Compatibility

The debug system is compliant with the RISC-V Debug Specification 0.13.2.