Registers

Summary

Name	Offset	Length	Description
adc_ctrl.`INTR_STATE`	0x0	4	Interrupt State Register
adc_ctrl.`INTR_ENABLE`	0x4	4	Interrupt Enable Register
adc_ctrl.`INTR_TEST`	0x8	4	Interrupt Test Register
adc_ctrl.`ALERT_TEST`	0xc	4	Alert Test Register
adc_ctrl.`adc_en_ctl`	0x10	4	ADC enable control register
adc_ctrl.`adc_pd_ctl`	0x14	4	ADC PowerDown(PD) control register
adc_ctrl.`adc_lp_sample_ctl`	0x18	4	ADC Low-Power(LP) sample control register
adc_ctrl.`adc_sample_ctl`	0x1c	4	ADC sample control register
adc_ctrl.`adc_fsm_rst`	0x20	4	ADC FSM reset control
adc_ctrl.`adc_chn0_filter_ctl_0`	0x24	4	ADC channel0 filter range
adc_ctrl.`adc_chn0_filter_ctl_1`	0x28	4	ADC channel0 filter range
adc_ctrl.`adc_chn0_filter_ctl_2`	0x2c	4	ADC channel0 filter range
adc_ctrl.`adc_chn0_filter_ctl_3`	0x30	4	ADC channel0 filter range
adc_ctrl.`adc_chn0_filter_ctl_4`	0x34	4	ADC channel0 filter range
adc_ctrl.`adc_chn0_filter_ctl_5`	0x38	4	ADC channel0 filter range
adc_ctrl.`adc_chn0_filter_ctl_6`	0x3c	4	ADC channel0 filter range
adc_ctrl.`adc_chn0_filter_ctl_7`	0x40	4	ADC channel0 filter range
adc_ctrl.`adc_chn1_filter_ctl_0`	0x44	4	ADC channel1 filter range
adc_ctrl.`adc_chn1_filter_ctl_1`	0x48	4	ADC channel1 filter range
adc_ctrl.`adc_chn1_filter_ctl_2`	0x4c	4	ADC channel1 filter range
adc_ctrl.`adc_chn1_filter_ctl_3`	0x50	4	ADC channel1 filter range
adc_ctrl.`adc_chn1_filter_ctl_4`	0x54	4	ADC channel1 filter range
adc_ctrl.`adc_chn1_filter_ctl_5`	0x58	4	ADC channel1 filter range
adc_ctrl.`adc_chn1_filter_ctl_6`	0x5c	4	ADC channel1 filter range
adc_ctrl.`adc_chn1_filter_ctl_7`	0x60	4	ADC channel1 filter range
adc_ctrl.`adc_chn_val_0`	0x64	4	ADC value sampled on channel
adc_ctrl.`adc_chn_val_1`	0x68	4	ADC value sampled on channel
adc_ctrl.`adc_wakeup_ctl`	0x6c	4	Enable filter matches as wakeups
adc_ctrl.`filter_status`	0x70	4	Adc filter match status
adc_ctrl.`adc_intr_ctl`	0x74	4	Interrupt enable controls.
adc_ctrl.`adc_intr_status`	0x78	4	Debug cable internal status

INTR_STATE

Interrupt State Register

Offset: 0x0
Reset default: 0x0
Reset mask: 0x1

Fields

{"reg": [{"name": "match_done", "bits": 1, "attr": ["rw1c"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 120}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw1c	0x0	match_done	ADC match or measurement event done

INTR_ENABLE

Interrupt Enable Register

Offset: 0x4
Reset default: 0x0
Reset mask: 0x1

Fields

{"reg": [{"name": "match_done", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 120}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw	0x0	match_done	Enable interrupt when `INTR_STATE.match_done` is set.

INTR_TEST

Interrupt Test Register

Offset: 0x8
Reset default: 0x0
Reset mask: 0x1

Fields

{"reg": [{"name": "match_done", "bits": 1, "attr": ["wo"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 120}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	wo	0x0	match_done	Write 1 to force `INTR_STATE.match_done` to 1.

ALERT_TEST

Alert Test Register

Offset: 0xc
Reset default: 0x0
Reset mask: 0x1

Fields

{"reg": [{"name": "fatal_fault", "bits": 1, "attr": ["wo"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 130}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	wo	0x0	fatal_fault	Write 1 to trigger one alert event of this kind.

adc_en_ctl

ADC enable control register

Offset: 0x10
Reset default: 0x0
Reset mask: 0x3

Fields

{"reg": [{"name": "adc_enable", "bits": 1, "attr": ["rw"], "rotate": -90}, {"name": "oneshot_mode", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 30}], "config": {"lanes": 1, "fontsize": 10, "vspace": 140}}

Bits	Type	Reset	Name	Description
31:2				Reserved
1	rw	0x0	oneshot_mode	Oneshot mode does not care about the filter value. 1'b0: disable; 1'b1: enable
0	rw	0x0	adc_enable	1'b0: to power down ADC and ADC_CTRL FSM will enter the reset state; 1'b1: to power up ADC and ADC_CTRL FSM will start

adc_pd_ctl

ADC PowerDown(PD) control register

Offset: 0x14
Reset default: 0x64070
Reset mask: 0xfffffff1

Fields

{"reg": [{"name": "lp_mode", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 3}, {"name": "pwrup_time", "bits": 4, "attr": ["rw"], "rotate": -90}, {"name": "wakeup_time", "bits": 24, "attr": ["rw"], "rotate": 0}], "config": {"lanes": 1, "fontsize": 10, "vspace": 120}}

Bits	Type	Reset	Name	Description
31:8	rw	0x640	wakeup_time	How often FSM wakes up from ADC PD mode to take a sample, measured in always on clock cycles.
7:4	rw	0x7	pwrup_time	ADC power up time, measured in always on clock cycles. After power up time is reached, the ADC controller needs one additional cycle before an ADC channel is selected for access.
3:1				Reserved
0	rw	0x0	lp_mode	1'b0: adc_pd is disabled, use adc_sample_ctl. 1'b1: adc_pd is enabled, use both adc_lp_sample_ctl & adc_sample_ctl

adc_lp_sample_ctl

ADC Low-Power(LP) sample control register

Offset: 0x18
Reset default: 0x4
Reset mask: 0xff

Fields

{"reg": [{"name": "lp_sample_cnt", "bits": 8, "attr": ["rw"], "rotate": 0}, {"bits": 24}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:8				Reserved
7:0	rw	0x4	lp_sample_cnt	The number of samples in low-power mode when the low-power mode is enabled. After the programmed number is met, ADC won't be powered down any more. This value must be 1 or larger.

adc_sample_ctl

ADC sample control register

Offset: 0x1c
Reset default: 0x9b
Reset mask: 0xffff

Fields

{"reg": [{"name": "np_sample_cnt", "bits": 16, "attr": ["rw"], "rotate": 0}, {"bits": 16}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:16				Reserved
15:0	rw	0x9b	np_sample_cnt	The number of samples in normal-power mode to meet the debounce spec. Used after the low-power mode condition is met or in the normal power mode. This value must be 1 or larger.

adc_fsm_rst

ADC FSM reset control

Offset: 0x20
Reset default: 0x0
Reset mask: 0x1

Fields

{"reg": [{"name": "rst_en", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 31}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:1				Reserved
0	rw	0x0	rst_en	1'b0: Normal functional mode. 1'b1: SW to reset all the FSMs and timers

adc_chn0_filter_ctl

ADC channel0 filter range

Up to 8 filters can be configured per channel and each filter has an associated [min, max] range. The condition bit then defines whether the sample values of that channel need to lie within the range or outside to create a match. The filter range bounds can be configured with a granularity of 2.148mV.

Reset default: 0x0
Reset mask: 0x8ffc1ffc

Instances

Name	Offset
adc_chn0_filter_ctl_0	0x24
adc_chn0_filter_ctl_1	0x28
adc_chn0_filter_ctl_2	0x2c
adc_chn0_filter_ctl_3	0x30
adc_chn0_filter_ctl_4	0x34
adc_chn0_filter_ctl_5	0x38
adc_chn0_filter_ctl_6	0x3c
adc_chn0_filter_ctl_7	0x40

Fields

{"reg": [{"bits": 2}, {"name": "min_v", "bits": 10, "attr": ["rw"], "rotate": 0}, {"name": "cond", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 5}, {"name": "max_v", "bits": 10, "attr": ["rw"], "rotate": 0}, {"bits": 3}, {"name": "EN", "bits": 1, "attr": ["rw"], "rotate": -90}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31	rw	0x0	EN	Enable for filter
30:28				Reserved
27:18	rw	0x0	max_v	10-bit for chn0 filter max value
17:13				Reserved
12	rw	0x0	cond	1-bit for the condition; 1'b0 means min<=ADC<=max, 1'b1 means ADC>max or ADC<min
11:2	rw	0x0	min_v	10-bit for chn0 filter min value
1:0				Reserved

adc_chn1_filter_ctl

ADC channel1 filter range

Up to 8 filters can be configured per channel and each filter has an associated [min, max] range. The condition bit then defines whether the sample values of that channel need to lie within the range or outside to create a match. The filter range bounds can be configured with a granularity of 2.148mV.

Reset default: 0x0
Reset mask: 0x8ffc1ffc

Instances

Name	Offset
adc_chn1_filter_ctl_0	0x44
adc_chn1_filter_ctl_1	0x48
adc_chn1_filter_ctl_2	0x4c
adc_chn1_filter_ctl_3	0x50
adc_chn1_filter_ctl_4	0x54
adc_chn1_filter_ctl_5	0x58
adc_chn1_filter_ctl_6	0x5c
adc_chn1_filter_ctl_7	0x60

Fields

{"reg": [{"bits": 2}, {"name": "min_v", "bits": 10, "attr": ["rw"], "rotate": 0}, {"name": "cond", "bits": 1, "attr": ["rw"], "rotate": -90}, {"bits": 5}, {"name": "max_v", "bits": 10, "attr": ["rw"], "rotate": 0}, {"bits": 3}, {"name": "EN", "bits": 1, "attr": ["rw"], "rotate": -90}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31	rw	0x0	EN	Enable for filter
30:28				Reserved
27:18	rw	0x0	max_v	10-bit for chn0 filter max value
17:13				Reserved
12	rw	0x0	cond	1-bit for the condition; 1'b0 means min<=ADC<=max, 1'b1 means ADC>max or ADC<min
11:2	rw	0x0	min_v	10-bit for chn0 filter min value
1:0				Reserved

adc_chn_val

ADC value sampled on channel

Reset default: 0x0
Reset mask: 0xfff0fff

Instances

Name	Offset
adc_chn_val_0	0x64
adc_chn_val_1	0x68

Fields

{"reg": [{"name": "adc_chn_value_ext", "bits": 2, "attr": ["ro"], "rotate": -90}, {"name": "adc_chn_value", "bits": 10, "attr": ["ro"], "rotate": 0}, {"bits": 4}, {"name": "adc_chn_value_intr_ext", "bits": 2, "attr": ["ro"], "rotate": -90}, {"name": "adc_chn_value_intr", "bits": 10, "attr": ["ro"], "rotate": 0}, {"bits": 4}], "config": {"lanes": 1, "fontsize": 10, "vspace": 240}}

Bits	Type	Reset	Name	Description
31:28				Reserved
27:18	ro	0x0	adc_chn_value_intr	ADC value sampled on channel when the interrupt is raised(debug cable is attached or disconnected), each step is 2.148mV
17:16	ro	0x0	adc_chn_value_intr_ext	2-bit extension; RO 0
15:12				Reserved
11:2	ro	0x0	adc_chn_value	Latest ADC value sampled on channel. each step is 2.148mV
1:0	ro	0x0	adc_chn_value_ext	2-bit extension; RO 0

adc_wakeup_ctl

Enable filter matches as wakeups

Offset: 0x6c
Reset default: 0x0
Reset mask: 0xff

Fields

{"reg": [{"name": "EN", "bits": 8, "attr": ["rw"], "rotate": 0}, {"bits": 24}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:8				Reserved
7:0	rw	0x0	EN	0: filter match wil not generate wakeupe; 1: filter match will generate wakeup

filter_status

Adc filter match status

Indicates whether a particular filter has matched on all channels.

Offset: 0x70
Reset default: 0x0
Reset mask: 0xff

Fields

{"reg": [{"name": "COND", "bits": 8, "attr": ["rw1c"], "rotate": 0}, {"bits": 24}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:8				Reserved
7:0	rw1c	0x0	COND	0: filter condition is not met; 1: filter condition is met

adc_intr_ctl

Interrupt enable controls.

adc_ctrl sends out only 1 interrupt, so this register controls which internal sources are actually registered.

This register uses the same bit enumeration as ADC_INTR_STATUS

Offset: 0x74
Reset default: 0x0
Reset mask: 0x1ff

Fields

{"reg": [{"name": "EN", "bits": 9, "attr": ["rw"], "rotate": 0}, {"bits": 23}], "config": {"lanes": 1, "fontsize": 10, "vspace": 80}}

Bits	Type	Reset	Name	Description
31:9				Reserved
8:0	rw	0x0	EN	0: interrupt source is not enabled; 1: interrupt source is enabled

adc_intr_status

Debug cable internal status

Offset: 0x78
Reset default: 0x0
Reset mask: 0x1ff

Fields

{"reg": [{"name": "filter_match", "bits": 8, "attr": ["rw1c"], "rotate": 0}, {"name": "oneshot", "bits": 1, "attr": ["rw1c"], "rotate": -90}, {"bits": 23}], "config": {"lanes": 1, "fontsize": 10, "vspace": 90}}

Bits	Type	Reset	Name	Description
31:9				Reserved
8	rw1c	0x0	oneshot	0: oneshot sample is not done ; 1: oneshot sample is done
7:0	rw1c	0x0	filter_match	0: filter condition is not met; 1: filter condition is met

Files

registers.md

Latest commit

History

registers.md

File metadata and controls

Registers

Summary

INTR_STATE

Fields

INTR_ENABLE

Fields

INTR_TEST

Fields

ALERT_TEST

Fields

adc_en_ctl

Fields

adc_pd_ctl

Fields

adc_lp_sample_ctl

Fields

adc_sample_ctl

Fields

adc_fsm_rst

Fields

adc_chn0_filter_ctl

Instances

Fields

adc_chn1_filter_ctl

Instances

Fields

adc_chn_val

Instances

Fields

adc_wakeup_ctl

Fields

filter_status

Fields

adc_intr_ctl

Fields

adc_intr_status

Fields