Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

No WLAN when setting a secure (password protected) WLAN network in AP+Client mode #285

Open
2 of 6 tasks
TheMZ2 opened this issue Jun 2, 2024 · 2 comments
Open
2 of 6 tasks

Comments

@TheMZ2
Copy link

TheMZ2 commented Jun 2, 2024

  1. Stratux version:

  2. Stratux config:

    SDR

    • single
    • dual

    GPS

    • yes
    • no
      type:

    AHRS

    • yes
    • no

    power source:
    12V to USB converter

  3. EFB app and version: (e.g., WingX Pro7 8.6.2)
    Skydemon
    EFB platform: (e.g., iOS 9.2)
    IOS 15.8.2
    EFB hardware: (e.g., iPad Mini 2)
    ipad mini 4

  4. Description of your issue:
    With the new release v1.6r1-eu030 of 7th of April Stratux started showing an abnormal behaviour.
    The problem starts when in AP+Client mode i add a hotspot with a password and then set a password to the Stratux own WLAN.
    As long as I don't set a password on Stratux WLAN network everything works as expected.
    As soon as this password is set the Stratux stops providing the WLAN.
    Apparently it keeps on working as it stays connected to the hotspot but I can't access the Stratux WLAN and I can't see what the thing is doing or even get a hold on the Logs.
    I've tried rebooting the system but the only solution i've found is to reflash it.
    Hope this gives you some hints on what went wrong.
    Looking forward to a new release.
    Thank you for providing the software for this mighty little system.
    Cheers

@b3nn0
Copy link
Owner

b3nn0 commented Jun 3, 2024

Unfortunately, I can't seem to reproduce that. Just tried to set it up, set a simple password (12345678) and enabled AP+Client mode.
It is now connected to my home network and offers an AP with the given password just fine.
Not sure what's going wrong for you.. any other info that might be helpful?

@TheMZ2
Copy link
Author

TheMZ2 commented Jun 4, 2024

Unfortunately no further infos. :(
Without the ability to get the logs I can only describe the problem like I did.
I just saw you released a new version of the SW.
I'm going to flash it and see if the problem goes away like it came.
version eu029 (original, pre-hotfix1) was working like a dream. The hotfix1 i haven't updated.
Then I flashed the eu030 and the problem was there all of a sudden.
I'll keep you posted as soon as I flash the eu031.
Thanks for the help!! :)
Cheers

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

2 participants