diff --git a/Documentation/filesystems/fsverity.rst b/Documentation/filesystems/fsverity.rst index ede672dedf110d..cb845e8e543530 100644 --- a/Documentation/filesystems/fsverity.rst +++ b/Documentation/filesystems/fsverity.rst @@ -38,20 +38,14 @@ fail at runtime. Use cases ========= -By itself, the base fs-verity feature only provides integrity -protection, i.e. detection of accidental (non-malicious) corruption. +By itself, fs-verity only provides integrity protection, i.e. +detection of accidental (non-malicious) corruption. However, because fs-verity makes retrieving the file hash extremely efficient, it's primarily meant to be used as a tool to support authentication (detection of malicious modifications) or auditing (logging file hashes before use). -Trusted userspace code (e.g. operating system code running on a -read-only partition that is itself authenticated by dm-verity) can -authenticate the contents of an fs-verity file by using the -`FS_IOC_MEASURE_VERITY`_ ioctl to retrieve its hash, then verifying a -digital signature of it. - A standard file hash could be used instead of fs-verity. However, this is inefficient if the file is large and only a small portion may be accessed. This is often the case for Android application package @@ -69,24 +63,31 @@ still be used on read-only filesystems. fs-verity is for files that must live on a read-write filesystem because they are independently updated and potentially user-installed, so dm-verity cannot be used. -The base fs-verity feature is a hashing mechanism only; actually -authenticating the files may be done by: - -* Userspace-only - -* Builtin signature verification + userspace policy - - fs-verity optionally supports a simple signature verification - mechanism where users can configure the kernel to require that - all fs-verity files be signed by a key loaded into a keyring; - see `Built-in signature verification`_. - -* Integrity Measurement Architecture (IMA) - - IMA supports including fs-verity file digests and signatures in the - IMA measurement list and verifying fs-verity based file signatures - stored as security.ima xattrs, based on policy. - +fs-verity does not mandate a particular scheme for authenticating its +file hashes. (Similarly, dm-verity does not mandate a particular +scheme for authenticating its block device root hashes.) Options for +authenticating fs-verity file hashes include: + +- Trusted userspace code. Often, the userspace code that accesses + files can be trusted to authenticate them. Consider e.g. an + application that wants to authenticate data files before using them, + or an application loader that is part of the operating system (which + is already authenticated in a different way, such as by being loaded + from a read-only partition that uses dm-verity) and that wants to + authenticate applications before loading them. In these cases, this + trusted userspace code can authenticate a file's contents by + retrieving its fs-verity digest using `FS_IOC_MEASURE_VERITY`_, then + verifying a signature of it using any userspace cryptographic + library that supports digital signatures. + +- Integrity Measurement Architecture (IMA). IMA supports fs-verity + file digests as an alternative to its traditional full file digests. + "IMA appraisal" enforces that files contain a valid, matching + signature in their "security.ima" extended attribute, as controlled + by the IMA policy. For more information, see the IMA documentation. + +- Trusted userspace code in combination with `Built-in signature + verification`_. This approach should be used only with great care. User API ======== @@ -111,8 +112,7 @@ follows:: }; This structure contains the parameters of the Merkle tree to build for -the file, and optionally contains a signature. It must be initialized -as follows: +the file. It must be initialized as follows: - ``version`` must be 1. - ``hash_algorithm`` must be the identifier for the hash algorithm to @@ -129,12 +129,14 @@ as follows: file or device. Currently the maximum salt size is 32 bytes. - ``salt_ptr`` is the pointer to the salt, or NULL if no salt is provided. -- ``sig_size`` is the size of the signature in bytes, or 0 if no - signature is provided. Currently the signature is (somewhat - arbitrarily) limited to 16128 bytes. See `Built-in signature - verification`_ for more information. -- ``sig_ptr`` is the pointer to the signature, or NULL if no - signature is provided. +- ``sig_size`` is the size of the builtin signature in bytes, or 0 if no + builtin signature is provided. Currently the builtin signature is + (somewhat arbitrarily) limited to 16128 bytes. +- ``sig_ptr`` is the pointer to the builtin signature, or NULL if no + builtin signature is provided. A builtin signature is only needed + if the `Built-in signature verification`_ feature is being used. It + is not needed for IMA appraisal, and it is not needed if the file + signature is being handled entirely in userspace. - All reserved fields must be zeroed. FS_IOC_ENABLE_VERITY causes the filesystem to build a Merkle tree for @@ -158,7 +160,7 @@ fatal signal), no changes are made to the file. FS_IOC_ENABLE_VERITY can fail with the following errors: - ``EACCES``: the process does not have write access to the file -- ``EBADMSG``: the signature is malformed +- ``EBADMSG``: the builtin signature is malformed - ``EBUSY``: this ioctl is already running on the file - ``EEXIST``: the file already has verity enabled - ``EFAULT``: the caller provided inaccessible memory @@ -168,10 +170,10 @@ FS_IOC_ENABLE_VERITY can fail with the following errors: reserved bits are set; or the file descriptor refers to neither a regular file nor a directory. - ``EISDIR``: the file descriptor refers to a directory -- ``EKEYREJECTED``: the signature doesn't match the file -- ``EMSGSIZE``: the salt or signature is too long -- ``ENOKEY``: the fs-verity keyring doesn't contain the certificate - needed to verify the signature +- ``EKEYREJECTED``: the builtin signature doesn't match the file +- ``EMSGSIZE``: the salt or builtin signature is too long +- ``ENOKEY``: the ".fs-verity" keyring doesn't contain the certificate + needed to verify the builtin signature - ``ENOPKG``: fs-verity recognizes the hash algorithm, but it's not available in the kernel's crypto API as currently configured (e.g. for SHA-512, missing CONFIG_CRYPTO_SHA512). @@ -180,8 +182,8 @@ FS_IOC_ENABLE_VERITY can fail with the following errors: support; or the filesystem superblock has not had the 'verity' feature enabled on it; or the filesystem does not support fs-verity on this file. (See `Filesystem support`_.) -- ``EPERM``: the file is append-only; or, a signature is required and - one was not provided. +- ``EPERM``: the file is append-only; or, a builtin signature is + required and one was not provided. - ``EROFS``: the filesystem is read-only - ``ETXTBSY``: someone has the file open for writing. This can be the caller's file descriptor, another open file descriptor, or the file @@ -270,9 +272,9 @@ This ioctl takes in a pointer to the following structure:: - ``FS_VERITY_METADATA_TYPE_DESCRIPTOR`` reads the fs-verity descriptor. See `fs-verity descriptor`_. -- ``FS_VERITY_METADATA_TYPE_SIGNATURE`` reads the signature which was - passed to FS_IOC_ENABLE_VERITY, if any. See `Built-in signature - verification`_. +- ``FS_VERITY_METADATA_TYPE_SIGNATURE`` reads the builtin signature + which was passed to FS_IOC_ENABLE_VERITY, if any. See `Built-in + signature verification`_. The semantics are similar to those of ``pread()``. ``offset`` specifies the offset in bytes into the metadata item to read from, and @@ -299,7 +301,7 @@ FS_IOC_READ_VERITY_METADATA can fail with the following errors: overflowed - ``ENODATA``: the file is not a verity file, or FS_VERITY_METADATA_TYPE_SIGNATURE was requested but the file doesn't - have a built-in signature + have a builtin signature - ``ENOTTY``: this type of filesystem does not implement fs-verity, or this ioctl is not yet implemented on it - ``EOPNOTSUPP``: the kernel was not configured with fs-verity @@ -347,8 +349,8 @@ non-verity one, with the following exceptions: with EIO (for read()) or SIGBUS (for mmap() reads). - If the sysctl "fs.verity.require_signatures" is set to 1 and the - file is not signed by a key in the fs-verity keyring, then opening - the file will fail. See `Built-in signature verification`_. + file is not signed by a key in the ".fs-verity" keyring, then + opening the file will fail. See `Built-in signature verification`_. Direct access to the Merkle tree is not supported. Therefore, if a verity file is copied, or is backed up and restored, then it will lose @@ -433,20 +435,25 @@ root hash as well as other fields such as the file size:: Built-in signature verification =============================== -With CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y, fs-verity supports putting -a portion of an authentication policy (see `Use cases`_) in the -kernel. Specifically, it adds support for: +CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y adds supports for in-kernel +verification of fs-verity builtin signatures. + +**IMPORTANT**! Please take great care before using this feature. +It is not the only way to do signatures with fs-verity, and the +alternatives (such as userspace signature verification, and IMA +appraisal) can be much better. It's also easy to fall into a trap +of thinking this feature solves more problems than it actually does. + +Enabling this option adds the following: -1. At fs-verity module initialization time, a keyring ".fs-verity" is - created. The root user can add trusted X.509 certificates to this - keyring using the add_key() system call, then (when done) - optionally use keyctl_restrict_keyring() to prevent additional - certificates from being added. +1. At boot time, the kernel creates a keyring named ".fs-verity". The + root user can add trusted X.509 certificates to this keyring using + the add_key() system call. 2. `FS_IOC_ENABLE_VERITY`_ accepts a pointer to a PKCS#7 formatted detached signature in DER format of the file's fs-verity digest. - On success, this signature is persisted alongside the Merkle tree. - Then, any time the file is opened, the kernel will verify the + On success, the ioctl persists the signature alongside the Merkle + tree. Then, any time the file is opened, the kernel verifies the file's actual digest against this signature, using the certificates in the ".fs-verity" keyring. @@ -454,8 +461,8 @@ kernel. Specifically, it adds support for: When set to 1, the kernel requires that all verity files have a correctly signed digest as described in (2). -fs-verity file digests must be signed in the following format, which -is similar to the structure used by `FS_IOC_MEASURE_VERITY`_:: +The data that the signature as described in (2) must be a signature of +is the fs-verity file digest in the following format:: struct fsverity_formatted_digest { char magic[8]; /* must be "FSVerity" */ @@ -464,13 +471,66 @@ is similar to the structure used by `FS_IOC_MEASURE_VERITY`_:: __u8 digest[]; }; -fs-verity's built-in signature verification support is meant as a -relatively simple mechanism that can be used to provide some level of -authenticity protection for verity files, as an alternative to doing -the signature verification in userspace or using IMA-appraisal. -However, with this mechanism, userspace programs still need to check -that the verity bit is set, and there is no protection against verity -files being swapped around. +That's it. It should be emphasized again that fs-verity builtin +signatures are not the only way to do signatures with fs-verity. See +`Use cases`_ for an overview of ways in which fs-verity can be used. +fs-verity builtin signatures have some major limitations that should +be carefully considered before using them: + +- Builtin signature verification does *not* make the kernel enforce + that any files actually have fs-verity enabled. Thus, it is not a + complete authentication policy. Currently, if it is used, the only + way to complete the authentication policy is for trusted userspace + code to explicitly check whether files have fs-verity enabled with a + signature before they are accessed. (With + fs.verity.require_signatures=1, just checking whether fs-verity is + enabled suffices.) But, in this case the trusted userspace code + could just store the signature alongside the file and verify it + itself using a cryptographic library, instead of using this feature. + +- A file's builtin signature can only be set at the same time that + fs-verity is being enabled on the file. Changing or deleting the + builtin signature later requires re-creating the file. + +- Builtin signature verification uses the same set of public keys for + all fs-verity enabled files on the system. Different keys cannot be + trusted for different files; each key is all or nothing. + +- The sysctl fs.verity.require_signatures applies system-wide. + Setting it to 1 only works when all users of fs-verity on the system + agree that it should be set to 1. This limitation can prevent + fs-verity from being used in cases where it would be helpful. + +- Builtin signature verification can only use signature algorithms + that are supported by the kernel. For example, the kernel does not + yet support Ed25519, even though this is often the signature + algorithm that is recommended for new cryptographic designs. + +- fs-verity builtin signatures are in PKCS#7 format, and the public + keys are in X.509 format. These formats are commonly used, + including by some other kernel features (which is why the fs-verity + builtin signatures use them), and are very feature rich. + Unfortunately, history has shown that code that parses and handles + these formats (which are from the 1990s and are based on ASN.1) + often has vulnerabilities as a result of their complexity. This + complexity is not inherent to the cryptography itself. + + fs-verity users who do not need advanced features of X.509 and + PKCS#7 should strongly consider using simpler formats, such as plain + Ed25519 keys and signatures, and verifying signatures in userspace. + + fs-verity users who choose to use X.509 and PKCS#7 anyway should + still consider that verifying those signatures in userspace is more + flexible (for other reasons mentioned earlier in this document) and + eliminates the need to enable CONFIG_FS_VERITY_BUILTIN_SIGNATURES + and its associated increase in kernel attack surface. In some cases + it can even be necessary, since advanced X.509 and PKCS#7 features + do not always work as intended with the kernel. For example, the + kernel does not check X.509 certificate validity times. + + Note: IMA appraisal, which supports fs-verity, does not use PKCS#7 + for its signatures, so it partially avoids the issues discussed + here. IMA appraisal does use X.509. Filesystem support ================== diff --git a/fs/verity/Kconfig b/fs/verity/Kconfig index a7ffd718f1719e..e1036e53535215 100644 --- a/fs/verity/Kconfig +++ b/fs/verity/Kconfig @@ -39,14 +39,14 @@ config FS_VERITY_BUILTIN_SIGNATURES depends on FS_VERITY select SYSTEM_DATA_VERIFICATION help - Support verifying signatures of verity files against the X.509 - certificates that have been loaded into the ".fs-verity" - kernel keyring. + This option adds support for in-kernel verification of + fs-verity builtin signatures. - This is meant as a relatively simple mechanism that can be - used to provide an authenticity guarantee for verity files, as - an alternative to IMA appraisal. Userspace programs still - need to check that the verity bit is set in order to get an - authenticity guarantee. + Please take great care before using this feature. It is not + the only way to do signatures with fs-verity, and the + alternatives (such as userspace signature verification, and + IMA appraisal) can be much better. For details about the + limitations of this feature, see + Documentation/filesystems/fsverity.rst. If unsure, say N. diff --git a/fs/verity/enable.c b/fs/verity/enable.c index bd86b25ac084b5..c284f46d1b535e 100644 --- a/fs/verity/enable.c +++ b/fs/verity/enable.c @@ -208,7 +208,7 @@ static int enable_verity(struct file *filp, } desc->salt_size = arg->salt_size; - /* Get the signature if the user provided one */ + /* Get the builtin signature if the user provided one */ if (arg->sig_size && copy_from_user(desc->signature, u64_to_user_ptr(arg->sig_ptr), arg->sig_size)) { diff --git a/fs/verity/open.c b/fs/verity/open.c index f0383bef86eaa8..1db5106a9c3856 100644 --- a/fs/verity/open.c +++ b/fs/verity/open.c @@ -156,7 +156,7 @@ int fsverity_init_merkle_tree_params(struct merkle_tree_params *params, /* * Compute the file digest by hashing the fsverity_descriptor excluding the - * signature and with the sig_size field set to 0. + * builtin signature and with the sig_size field set to 0. */ static int compute_file_digest(const struct fsverity_hash_alg *hash_alg, struct fsverity_descriptor *desc, @@ -174,7 +174,7 @@ static int compute_file_digest(const struct fsverity_hash_alg *hash_alg, /* * Create a new fsverity_info from the given fsverity_descriptor (with optional - * appended signature), and check the signature if present. The + * appended builtin signature), and check the signature if present. The * fsverity_descriptor must have already undergone basic validation. */ struct fsverity_info *fsverity_create_info(const struct inode *inode, @@ -319,8 +319,8 @@ static bool validate_fsverity_descriptor(struct inode *inode, } /* - * Read the inode's fsverity_descriptor (with optional appended signature) from - * the filesystem, and do basic validation of it. + * Read the inode's fsverity_descriptor (with optional appended builtin + * signature) from the filesystem, and do basic validation of it. */ int fsverity_get_descriptor(struct inode *inode, struct fsverity_descriptor **desc_ret) diff --git a/fs/verity/read_metadata.c b/fs/verity/read_metadata.c index 2aefc5565152ad..f58432772d9ea2 100644 --- a/fs/verity/read_metadata.c +++ b/fs/verity/read_metadata.c @@ -105,7 +105,7 @@ static int fsverity_read_descriptor(struct inode *inode, if (res) return res; - /* don't include the signature */ + /* don't include the builtin signature */ desc_size = offsetof(struct fsverity_descriptor, signature); desc->sig_size = 0; @@ -131,7 +131,7 @@ static int fsverity_read_signature(struct inode *inode, } /* - * Include only the signature. Note that fsverity_get_descriptor() + * Include only the builtin signature. fsverity_get_descriptor() * already verified that sig_size is in-bounds. */ res = fsverity_read_buffer(buf, offset, length, desc->signature, diff --git a/fs/verity/signature.c b/fs/verity/signature.c index b8c51ad40d3a3a..72034bc71c9d9b 100644 --- a/fs/verity/signature.c +++ b/fs/verity/signature.c @@ -5,6 +5,14 @@ * Copyright 2019 Google LLC */ +/* + * This file implements verification of fs-verity builtin signatures. Please + * take great care before using this feature. It is not the only way to do + * signatures with fs-verity, and the alternatives (such as userspace signature + * verification, and IMA appraisal) can be much better. For details about the + * limitations of this feature, see Documentation/filesystems/fsverity.rst. + */ + #include "fsverity_private.h" #include