Skip to content

Latest commit

 

History

History
238 lines (191 loc) · 9.5 KB

CompileHowto.md

File metadata and controls

238 lines (191 loc) · 9.5 KB
Raw

With Docker

If you are using Docker, you can compile Hyperion inside a docker container. This keeps your system clean and with a simple script it's easy to use. Supported is also cross compiling for Raspberry Pi (Debian Stretch or higher). To compile Hyperion just execute one of the following commands.

The compiled binaries and packages will be available at the deploy folder next to the script.
Note: call the script with ./docker-compile.sh -h for more options.

Native compilation on Raspberry Pi for:

Raspbian Stretch

wget -qN https://raw.github.com/hyperion-project/hyperion.ng/master/bin/scripts/docker-compile.sh && chmod +x *.sh && ./docker-compile.sh -i rpi-raspbian

Raspbian Buster/Raspberry Pi OS

wget -qN https://raw.github.com/hyperion-project/hyperion.ng/master/bin/scripts/docker-compile.sh && chmod +x *.sh && ./docker-compile.sh -i rpi-raspbian -t buster

Cross compilation on x86_64 for:

x86_64 (Debian Stretch):

wget -qN https://raw.github.com/hyperion-project/hyperion.ng/master/bin/scripts/docker-compile.sh && chmod +x *.sh && ./docker-compile.sh -i x86_64

x86_64 (Debian Buster):

wget -qN https://raw.github.com/hyperion-project/hyperion.ng/master/bin/scripts/docker-compile.sh && chmod +x *.sh && ./docker-compile.sh -i x86_64 -t buster

Raspberry Pi v1 & ZERO (Debian Stretch)

wget -qN https://raw.github.com/hyperion-project/hyperion.ng/master/bin/scripts/docker-compile.sh && chmod +x *.sh && ./docker-compile.sh -i armv6l

Raspberry Pi v1 & ZERO (Debian Buster)

wget -qN https://raw.github.com/hyperion-project/hyperion.ng/master/bin/scripts/docker-compile.sh && chmod +x *.sh && ./docker-compile.sh -i armv6l -t buster

Raspberry Pi 2/3/4 (Debian Stretch)

wget -qN https://raw.github.com/hyperion-project/hyperion.ng/master/bin/scripts/docker-compile.sh && chmod +x *.sh && ./docker-compile.sh -i armv7l

Raspberry Pi 2/3/4 (Debian Buster)

wget -qN https://raw.github.com/hyperion-project/hyperion.ng/master/bin/scripts/docker-compile.sh && chmod +x *.sh && ./docker-compile.sh -i armv7l -t buster

Cross compilation on x86_64 for developers

Using additional options you can cross compile locally -l: use a local hyperion source code directory rather than cloning from GitHub -c: do incremental compiles, Note: you need to keep the image and tag stable

Compile code in $HYPERION_HOME incrementally for Raspberry Pi 2/3/4 (Debian Buster)

cd $HYPERION_HOME
./bin/scripts/docker-compile.sh -l -c -i armv7l -t buster

The usual way

Debian/Ubuntu/Win10LinuxSubsystem

sudo apt-get update
sudo apt-get install git cmake build-essential qtbase5-dev libqt5serialport5-dev libqt5sql5-sqlite libqt5svg5-dev libqt5x11extras5-dev libusb-1.0-0-dev python3-dev libcec-dev libxcb-image0-dev libxcb-util0-dev libxcb-shm0-dev libxcb-render0-dev libxcb-randr0-dev libxrandr-dev libxrender-dev libavahi-core-dev libavahi-compat-libdnssd-dev libturbojpeg0-dev libssl-dev zlib1g-dev

on RPI you need the videocore IV headers

sudo apt-get install libraspberrypi-dev

OSMC on Raspberry Pi

sudo apt-get install rbp-userland-dev-osmc

ATTENTION Win10LinuxSubsystem we do not (/we can't) support using hyperion in linux subsystem of MS Windows 10, albeit some users tested it with success. Keep in mind to disable all linux specific led and grabber hardware via cmake. Because we use QT as framework in hyperion, serialport leds and network driven devices could work.

Arch

See AUR for PKGBUILDs on arch. If the PKGBUILD does not work ask questions there please.

Fedora

The following dependencies are needed to build hyperion.ng on fedora.

sudo dnf -y groupinstall "Development Tools"
sudo dnf install python3-devel qt-devel qt5-qtbase-devel qt5-qtserialport-devel xrandr xcb-util-image-devel qt5-qtx11extras-devel turbojpeg-devel libusb-devel avahi-libs avahi-compat-libdns_sd-devel xcb-util-devel dbus-devel openssl-devel fedora-packager rpmdevtools gcc libcec-devel

After installing the dependencies, you can continue with the compile instructions later on this page (the more detailed way..).

OSX

To install on OS X you either need Homebrew or Macport but Homebrew is the recommended way to install the packages. To use Homebrew XCode is required as well, use brew doctor to check your install.

First you need to install the dependencies:

brew install qt5 python3 cmake libusb doxygen zlib

Windows (WIP)

We assume a 64bit Windows 10. Install the following;

Optional:

Compiling and installing Hyperion

The general quick way (without big comments)

complete automated process for Mac/Linux:

wget -qO- https://raw.githubusercontent.com/hyperion-project/hyperion.ng/master/bin/compile.sh | sh

some more detailed way: (or more or less the content of the script above)

# be sure you fulfill the prerequisites above
git clone --recursive https://github.com/hyperion-project/hyperion.ng.git hyperion
cd hyperion
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release ..
make -j $(nproc)
if this get stucked and dmesg says out of memory try:
make -j 2
# optional: install into your system
sudo make install/strip
# to uninstall (not very well tested, please keep that in mind)
sudo make uninstall
# ... or run it from compile directory
bin/hyperiond
# webui is located on localhost:8090 or 8091

The detailed way (with many comments)

Download: Creates hyperion directory and checkout the code from github

export HYPERION_DIR="hyperion"
git clone --recursive --depth 1 https://github.com/hyperion-project/hyperion.ng.git "$HYPERION_DIR"

Preparations: Change into hyperion folder and create a build folder

cd "$HYPERION_DIR"
mkdir build
cd build

Generate the make files: To generate make files with automatic platform detection and default settings: This should fit to *RPI, x86, amlogic/wetek:

cmake -DCMAKE_BUILD_TYPE=Release ..

Developers on x86 linux should use:

cmake -DPLATFORM=x11-dev -DCMAKE_BUILD_TYPE=Release ..

To use framebuffer instead of dispmanx (for example on the cubox-i):

cmake -DENABLE_FB=ON -DCMAKE_BUILD_TYPE=Release ..

To generate make files on OS X:

Platform should be auto detected and refer to osx, you can also force osx:

cmake -DPLATFORM=osx -DCMAKE_BUILD_TYPE=Release ..

In case you would like to build with a dedicated Qt version, provide the version's location via the CMAKE_PREFIX_PATH:

cmake -DCMAKE_PREFIX_PATH=/opt/Qt/5.15.2/gcc_64 -DCMAKE_BUILD_TYPE=Release ..

To generate files on Windows (Release+Debug capable):

Platform should be auto detected and refer to windows, you can also force windows:

# You might need to setup MSVC env first
call "C:\Program Files (x86)\Microsoft Visual Studio\2019\BuildTools\VC\Auxiliary\Build\vcvars64.bat"
cmake -DPLATFORM=windows -G "Visual Studio 16 2019" ..

Run make to build Hyperion: The -j $(nproc) specifies the amount of CPU cores to use.

make -j $(nproc)

On a mac you can use sysctl -n hw.ncpu to get the number of available CPU cores to use.

make -j $(sysctl -n hw.ncpu)

On Windows run:

cmake --build . --config Release -- -maxcpucount

Maintainer: To build installer, install NSIS and set env VCINSTALLDIR="C:\Program Files (x86)\Microsoft Visual Studio\2019\BuildTools\VC"

Install hyperion into your system: Copy all necessary files to /usr/local/share/hyperion

sudo make install/strip

If you want to install into another location call this before installing

cmake -DCMAKE_INSTALL_PREFIX=/home/pi/apps ..

This will install to /home/pi/apps/share/hyperion

Integrating hyperion into your system:

... ToDo