From d64e220afb88dead03b4efdc756dd17eca0686a1 Mon Sep 17 00:00:00 2001 From: Sebastiaan van Stijn Date: Mon, 27 May 2024 16:25:18 +0200 Subject: [PATCH 1/7] api/types: NetworkCreate: add GoDoc GoDoc is mostly copied from NetworkResource, which is the equivalent for retrieving the information. Signed-off-by: Sebastiaan van Stijn --- api/types/types.go | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/api/types/types.go b/api/types/types.go index ca07162a20e07..583b9cbecfa2e 100644 --- a/api/types/types.go +++ b/api/types/types.go @@ -457,24 +457,24 @@ type EndpointResource struct { type NetworkCreate struct { // Deprecated: CheckDuplicate is deprecated since API v1.44, but it defaults to true when sent by the client // package to older daemons. - CheckDuplicate bool `json:",omitempty"` - Driver string - Scope string - EnableIPv6 bool - IPAM *network.IPAM - Internal bool - Attachable bool - Ingress bool - ConfigOnly bool - ConfigFrom *network.ConfigReference - Options map[string]string - Labels map[string]string + CheckDuplicate bool `json:",omitempty"` + Driver string // Driver is the driver-name used to create the network (e.g. `bridge`, `overlay`) + Scope string // Scope describes the level at which the network exists (e.g. `swarm` for cluster-wide or `local` for machine level). + EnableIPv6 bool // EnableIPv6 represents whether to enable IPv6. + IPAM *network.IPAM // IPAM is the network's IP Address Management. + Internal bool // Internal represents if the network is used internal only. + Attachable bool // Attachable represents if the global scope is manually attachable by regular containers from workers in swarm mode. + Ingress bool // Ingress indicates the network is providing the routing-mesh for the swarm cluster. + ConfigOnly bool // ConfigOnly creates a config-only network. Config-only networks are place-holder networks for network configurations to be used by other networks. ConfigOnly networks cannot be used directly to run containers or services. + ConfigFrom *network.ConfigReference // ConfigFrom specifies the source which will provide the configuration for this network. The specified network must be a config-only network; see [NetworkCreate.ConfigOnly]. + Options map[string]string // Options specifies the network-specific options to use for when creating the network. + Labels map[string]string // Labels holds metadata specific to the network being created. } // NetworkCreateRequest is the request message sent to the server for network create call. type NetworkCreateRequest struct { NetworkCreate - Name string + Name string // Name is the requested name of the network. } // NetworkCreateResponse is the response message sent by the server for network create call From 51885166b9ff4ce62b843e0d61e166cbd01fa7d2 Mon Sep 17 00:00:00 2001 From: Sebastiaan van Stijn Date: Mon, 27 May 2024 17:36:05 +0200 Subject: [PATCH 2/7] api: swagger: POST /networks/create: inline examples per-field Move the example values per-field to reduce the risk of the example given from diverging with the actual struct that's used for the request. Signed-off-by: Sebastiaan van Stijn --- api/swagger.yaml | 50 +++++++++++++++++++++--------------------------- 1 file changed, 22 insertions(+), 28 deletions(-) diff --git a/api/swagger.yaml b/api/swagger.yaml index 2aaae02447d5d..56360f8c51685 100644 --- a/api/swagger.yaml +++ b/api/swagger.yaml @@ -2252,6 +2252,7 @@ definitions: description: "Name of the IPAM driver to use." type: "string" default: "default" + example: "default" Config: description: | List of IPAM configuration options, specified as a map: @@ -2267,16 +2268,21 @@ definitions: type: "object" additionalProperties: type: "string" + example: + foo: "bar" IPAMConfig: type: "object" properties: Subnet: type: "string" + example: "172.20.0.0/16" IPRange: type: "string" + example: "172.20.10.0/24" Gateway: type: "string" + example: "172.20.10.11" AuxiliaryAddresses: type: "object" additionalProperties: @@ -10104,14 +10110,17 @@ paths: Name: description: "The network's name." type: "string" + example: "my_network" CheckDuplicate: description: | Deprecated: CheckDuplicate is now always enabled. type: "boolean" + example: true Driver: description: "Name of the network driver plugin to use." type: "string" default: "bridge" + example: "bridge" Internal: description: "Restrict external access to the network." type: "boolean" @@ -10120,55 +10129,40 @@ paths: Globally scoped network is manually attachable by regular containers from workers in swarm mode. type: "boolean" + example: true Ingress: description: | Ingress network is the network which provides the routing-mesh in swarm mode. type: "boolean" + example: false IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" EnableIPv6: description: "Enable IPv6 on the network." type: "boolean" + example: true Options: description: "Network specific options to be used by the drivers." type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "isolated_nw" - CheckDuplicate: false - Driver: "bridge" - EnableIPv6: true - IPAM: - Driver: "default" - Config: - - Subnet: "172.20.0.0/16" - IPRange: "172.20.10.0/24" - Gateway: "172.20.10.11" - - Subnet: "2001:db8:abcd::/64" - Gateway: "2001:db8:abcd::1011" - Options: - foo: "bar" - Internal: true - Attachable: false - Ingress: false - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" tags: ["Network"] /networks/{id}/connect: From 6cab6d0302573253cf89f0b66d4854892cfc8407 Mon Sep 17 00:00:00 2001 From: Sebastiaan van Stijn Date: Mon, 27 May 2024 17:49:06 +0200 Subject: [PATCH 3/7] docs/api: POST /networks/create: inline examples per-field (v1.41 - v1.45) Move the example values per-field to reduce the risk of the example given from diverging with the actual struct that's used for the request. This patch updates older API versions (went back to v1.41). Signed-off-by: Sebastiaan van Stijn --- docs/api/v1.41.yaml | 50 ++++++++++++++++++++------------------------- docs/api/v1.42.yaml | 50 ++++++++++++++++++++------------------------- docs/api/v1.43.yaml | 50 ++++++++++++++++++++------------------------- docs/api/v1.44.yaml | 50 ++++++++++++++++++++------------------------- docs/api/v1.45.yaml | 50 ++++++++++++++++++++------------------------- 5 files changed, 110 insertions(+), 140 deletions(-) diff --git a/docs/api/v1.41.yaml b/docs/api/v1.41.yaml index 6ae195554cea2..f441fd5cf21c8 100644 --- a/docs/api/v1.41.yaml +++ b/docs/api/v1.41.yaml @@ -2178,6 +2178,7 @@ definitions: description: "Name of the IPAM driver to use." type: "string" default: "default" + example: "default" Config: description: | List of IPAM configuration options, specified as a map: @@ -2193,16 +2194,21 @@ definitions: type: "object" additionalProperties: type: "string" + example: + foo: "bar" IPAMConfig: type: "object" properties: Subnet: type: "string" + example: "172.20.0.0/16" IPRange: type: "string" + example: "172.20.10.0/24" Gateway: type: "string" + example: "172.20.10.11" AuxiliaryAddresses: type: "object" additionalProperties: @@ -9536,6 +9542,7 @@ paths: Name: description: "The network's name." type: "string" + example: "my_network" CheckDuplicate: description: | Check for networks with duplicate names. Since Network is @@ -9546,10 +9553,12 @@ paths: a best effort checking of any networks which has the same name but it is not guaranteed to catch all name collisions. type: "boolean" + example: true Driver: description: "Name of the network driver plugin to use." type: "string" default: "bridge" + example: "bridge" Internal: description: "Restrict external access to the network." type: "boolean" @@ -9558,55 +9567,40 @@ paths: Globally scoped network is manually attachable by regular containers from workers in swarm mode. type: "boolean" + example: true Ingress: description: | Ingress network is the network which provides the routing-mesh in swarm mode. type: "boolean" + example: false IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" EnableIPv6: description: "Enable IPv6 on the network." type: "boolean" + example: true Options: description: "Network specific options to be used by the drivers." type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "isolated_nw" - CheckDuplicate: false - Driver: "bridge" - EnableIPv6: true - IPAM: - Driver: "default" - Config: - - Subnet: "172.20.0.0/16" - IPRange: "172.20.10.0/24" - Gateway: "172.20.10.11" - - Subnet: "2001:db8:abcd::/64" - Gateway: "2001:db8:abcd::1011" - Options: - foo: "bar" - Internal: true - Attachable: false - Ingress: false - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" tags: ["Network"] /networks/{id}/connect: diff --git a/docs/api/v1.42.yaml b/docs/api/v1.42.yaml index f20c9b40c5d2f..f63d541468b3b 100644 --- a/docs/api/v1.42.yaml +++ b/docs/api/v1.42.yaml @@ -2186,6 +2186,7 @@ definitions: description: "Name of the IPAM driver to use." type: "string" default: "default" + example: "default" Config: description: | List of IPAM configuration options, specified as a map: @@ -2201,16 +2202,21 @@ definitions: type: "object" additionalProperties: type: "string" + example: + foo: "bar" IPAMConfig: type: "object" properties: Subnet: type: "string" + example: "172.20.0.0/16" IPRange: type: "string" + example: "172.20.10.0/24" Gateway: type: "string" + example: "172.20.10.11" AuxiliaryAddresses: type: "object" additionalProperties: @@ -9914,6 +9920,7 @@ paths: Name: description: "The network's name." type: "string" + example: "my_network" CheckDuplicate: description: | Check for networks with duplicate names. Since Network is @@ -9924,10 +9931,12 @@ paths: a best effort checking of any networks which has the same name but it is not guaranteed to catch all name collisions. type: "boolean" + example: true Driver: description: "Name of the network driver plugin to use." type: "string" default: "bridge" + example: "bridge" Internal: description: "Restrict external access to the network." type: "boolean" @@ -9936,55 +9945,40 @@ paths: Globally scoped network is manually attachable by regular containers from workers in swarm mode. type: "boolean" + example: true Ingress: description: | Ingress network is the network which provides the routing-mesh in swarm mode. type: "boolean" + example: false IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" EnableIPv6: description: "Enable IPv6 on the network." type: "boolean" + example: true Options: description: "Network specific options to be used by the drivers." type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "isolated_nw" - CheckDuplicate: false - Driver: "bridge" - EnableIPv6: true - IPAM: - Driver: "default" - Config: - - Subnet: "172.20.0.0/16" - IPRange: "172.20.10.0/24" - Gateway: "172.20.10.11" - - Subnet: "2001:db8:abcd::/64" - Gateway: "2001:db8:abcd::1011" - Options: - foo: "bar" - Internal: true - Attachable: false - Ingress: false - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" tags: ["Network"] /networks/{id}/connect: diff --git a/docs/api/v1.43.yaml b/docs/api/v1.43.yaml index ff1e458ed95be..8927087c3ce22 100644 --- a/docs/api/v1.43.yaml +++ b/docs/api/v1.43.yaml @@ -2217,6 +2217,7 @@ definitions: description: "Name of the IPAM driver to use." type: "string" default: "default" + example: "default" Config: description: | List of IPAM configuration options, specified as a map: @@ -2232,16 +2233,21 @@ definitions: type: "object" additionalProperties: type: "string" + example: + foo: "bar" IPAMConfig: type: "object" properties: Subnet: type: "string" + example: "172.20.0.0/16" IPRange: type: "string" + example: "172.20.10.0/24" Gateway: type: "string" + example: "172.20.10.11" AuxiliaryAddresses: type: "object" additionalProperties: @@ -9932,6 +9938,7 @@ paths: Name: description: "The network's name." type: "string" + example: "my_network" CheckDuplicate: description: | Check for networks with duplicate names. Since Network is @@ -9942,10 +9949,12 @@ paths: a best effort checking of any networks which has the same name but it is not guaranteed to catch all name collisions. type: "boolean" + example: true Driver: description: "Name of the network driver plugin to use." type: "string" default: "bridge" + example: "bridge" Internal: description: "Restrict external access to the network." type: "boolean" @@ -9954,55 +9963,40 @@ paths: Globally scoped network is manually attachable by regular containers from workers in swarm mode. type: "boolean" + example: true Ingress: description: | Ingress network is the network which provides the routing-mesh in swarm mode. type: "boolean" + example: false IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" EnableIPv6: description: "Enable IPv6 on the network." type: "boolean" + example: true Options: description: "Network specific options to be used by the drivers." type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "isolated_nw" - CheckDuplicate: false - Driver: "bridge" - EnableIPv6: true - IPAM: - Driver: "default" - Config: - - Subnet: "172.20.0.0/16" - IPRange: "172.20.10.0/24" - Gateway: "172.20.10.11" - - Subnet: "2001:db8:abcd::/64" - Gateway: "2001:db8:abcd::1011" - Options: - foo: "bar" - Internal: true - Attachable: false - Ingress: false - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" tags: ["Network"] /networks/{id}/connect: diff --git a/docs/api/v1.44.yaml b/docs/api/v1.44.yaml index 350d37a96c470..95a63555afb94 100644 --- a/docs/api/v1.44.yaml +++ b/docs/api/v1.44.yaml @@ -2244,6 +2244,7 @@ definitions: description: "Name of the IPAM driver to use." type: "string" default: "default" + example: "default" Config: description: | List of IPAM configuration options, specified as a map: @@ -2259,16 +2260,21 @@ definitions: type: "object" additionalProperties: type: "string" + example: + foo: "bar" IPAMConfig: type: "object" properties: Subnet: type: "string" + example: "172.20.0.0/16" IPRange: type: "string" + example: "172.20.10.0/24" Gateway: type: "string" + example: "172.20.10.11" AuxiliaryAddresses: type: "object" additionalProperties: @@ -10102,14 +10108,17 @@ paths: Name: description: "The network's name." type: "string" + example: "my_network" CheckDuplicate: description: | Deprecated: CheckDuplicate is now always enabled. type: "boolean" + example: true Driver: description: "Name of the network driver plugin to use." type: "string" default: "bridge" + example: "bridge" Internal: description: "Restrict external access to the network." type: "boolean" @@ -10118,55 +10127,40 @@ paths: Globally scoped network is manually attachable by regular containers from workers in swarm mode. type: "boolean" + example: true Ingress: description: | Ingress network is the network which provides the routing-mesh in swarm mode. type: "boolean" + example: false IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" EnableIPv6: description: "Enable IPv6 on the network." type: "boolean" + example: true Options: description: "Network specific options to be used by the drivers." type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "isolated_nw" - CheckDuplicate: false - Driver: "bridge" - EnableIPv6: true - IPAM: - Driver: "default" - Config: - - Subnet: "172.20.0.0/16" - IPRange: "172.20.10.0/24" - Gateway: "172.20.10.11" - - Subnet: "2001:db8:abcd::/64" - Gateway: "2001:db8:abcd::1011" - Options: - foo: "bar" - Internal: true - Attachable: false - Ingress: false - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" tags: ["Network"] /networks/{id}/connect: diff --git a/docs/api/v1.45.yaml b/docs/api/v1.45.yaml index 5677340dbd53f..a123a810954e9 100644 --- a/docs/api/v1.45.yaml +++ b/docs/api/v1.45.yaml @@ -2252,6 +2252,7 @@ definitions: description: "Name of the IPAM driver to use." type: "string" default: "default" + example: "default" Config: description: | List of IPAM configuration options, specified as a map: @@ -2267,16 +2268,21 @@ definitions: type: "object" additionalProperties: type: "string" + example: + foo: "bar" IPAMConfig: type: "object" properties: Subnet: type: "string" + example: "172.20.0.0/16" IPRange: type: "string" + example: "172.20.10.0/24" Gateway: type: "string" + example: "172.20.10.11" AuxiliaryAddresses: type: "object" additionalProperties: @@ -10104,14 +10110,17 @@ paths: Name: description: "The network's name." type: "string" + example: "my_network" CheckDuplicate: description: | Deprecated: CheckDuplicate is now always enabled. type: "boolean" + example: true Driver: description: "Name of the network driver plugin to use." type: "string" default: "bridge" + example: "bridge" Internal: description: "Restrict external access to the network." type: "boolean" @@ -10120,55 +10129,40 @@ paths: Globally scoped network is manually attachable by regular containers from workers in swarm mode. type: "boolean" + example: true Ingress: description: | Ingress network is the network which provides the routing-mesh in swarm mode. type: "boolean" + example: false IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" EnableIPv6: description: "Enable IPv6 on the network." type: "boolean" + example: true Options: description: "Network specific options to be used by the drivers." type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "isolated_nw" - CheckDuplicate: false - Driver: "bridge" - EnableIPv6: true - IPAM: - Driver: "default" - Config: - - Subnet: "172.20.0.0/16" - IPRange: "172.20.10.0/24" - Gateway: "172.20.10.11" - - Subnet: "2001:db8:abcd::/64" - Gateway: "2001:db8:abcd::1011" - Options: - foo: "bar" - Internal: true - Attachable: false - Ingress: false - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" tags: ["Network"] /networks/{id}/connect: From 8b7a54f622ccdd8a284f34acaecc5b0fe25b5fd3 Mon Sep 17 00:00:00 2001 From: Sebastiaan van Stijn Date: Mon, 27 May 2024 20:45:13 +0200 Subject: [PATCH 4/7] api: swagger: Network: inline examples, and add ConfigOnly, ConfigFrom These fields were added in 9ee7b4dda926a1444dc0ea50c4ca6d90c8684060, but not documented in the API docs / swagger. Also move the example values per-field to reduce the risk of the example given from diverging with the actual struct that's used for the request. Signed-off-by: Sebastiaan van Stijn --- api/swagger.yaml | 121 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 87 insertions(+), 34 deletions(-) diff --git a/api/swagger.yaml b/api/swagger.yaml index 56360f8c51685..7a9c357ee8920 100644 --- a/api/swagger.yaml +++ b/api/swagger.yaml @@ -2179,72 +2179,120 @@ definitions: type: "object" properties: Name: + description: | + Name of the network. type: "string" + example: "my_network" Id: + description: | + ID that uniquely identifies a network on a single machine. type: "string" + example: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" Created: + description: | + Date and time at which the network was created in + [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format with nano-seconds. type: "string" format: "dateTime" + example: "2016-10-19T04:33:30.360899459Z" Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level) type: "string" + example: "local" Driver: + description: | + The name of the driver used to create the network (e.g. `bridge`, + `overlay`). type: "string" + example: "bridge" EnableIPv6: + description: | + Whether the network was created with IPv6 enabled. type: "boolean" + example: false IPAM: $ref: "#/definitions/IPAM" Internal: + description: | + Whether the network is created to only allow internal networking + connectivity. type: "boolean" + default: false + example: false Attachable: + description: | + Wheter a global / swarm scope network is manually attachable by regular + containers from workers in swarm mode. type: "boolean" + default: false + example: false Ingress: + description: | + Whether the network is providing the routing-mesh for the swarm cluster. type: "boolean" + default: false + example: false + ConfigFrom: + $ref: "#/definitions/ConfigReference" + ConfigOnly: + description: | + Whether the network is a config-only network. Config-only networks are + placeholder networks for network configurations to be used by other + networks. Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false Containers: + description: | + Contains endpoints attached to the network. type: "object" additionalProperties: $ref: "#/definitions/NetworkContainer" + example: + 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: + Name: "test" + EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" + MacAddress: "02:42:ac:13:00:02" + IPv4Address: "172.19.0.2/16" + IPv6Address: "" Options: + description: | + Network-specific options uses when creating the network. type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: + description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "net01" - Id: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" - Created: "2016-10-19T04:33:30.360899459Z" - Scope: "local" - Driver: "bridge" - EnableIPv6: false - IPAM: - Driver: "default" - Config: - - Subnet: "172.19.0.0/16" - Gateway: "172.19.0.1" - Options: - foo: "bar" - Internal: false - Attachable: false - Ingress: false - Containers: - 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: - Name: "test" - EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" - MacAddress: "02:42:ac:13:00:02" - IPv4Address: "172.19.0.2/16" - IPv6Address: "" - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" + + ConfigReference: + description: | + The config-only network source to provide the configuration for + this network. + type: "object" + properties: + Network: + description: | + The name of the config-only network that provides the network's + configuration. The specified network must be an existing config-only + network. Only network names are allowed, not network IDs. + type: "string" + example: "config_only_network_01" + IPAM: type: "object" properties: @@ -2293,14 +2341,19 @@ definitions: properties: Name: type: "string" + example: "container_1" EndpointID: type: "string" + example: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" MacAddress: type: "string" + example: "02:42:ac:13:00:02" IPv4Address: type: "string" + example: "172.19.0.2/16" IPv6Address: type: "string" + example: "" BuildInfo: type: "object" From 44125530bf0045e83cf216f4dfda91b4ee68f4de Mon Sep 17 00:00:00 2001 From: Sebastiaan van Stijn Date: Mon, 27 May 2024 20:47:26 +0200 Subject: [PATCH 5/7] api: swagger: POST /networks/create: document Scope, ConfigOnly, ConfigFrom Adds missing documentation for Scope, ConfigOnly, and ConfigFrom. The ConfigOnly and ConfigFrom fields were added in 9ee7b4dda926a1444dc0ea50c4ca6d90c8684060, but not documented in the API docs / swagger. Signed-off-by: Sebastiaan van Stijn --- api/swagger.yaml | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/api/swagger.yaml b/api/swagger.yaml index 7a9c357ee8920..ef76b3e412587 100644 --- a/api/swagger.yaml +++ b/api/swagger.yaml @@ -10174,6 +10174,11 @@ paths: type: "string" default: "bridge" example: "bridge" + Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level). + type: "string" Internal: description: "Restrict external access to the network." type: "boolean" @@ -10189,6 +10194,21 @@ paths: in swarm mode. type: "boolean" example: false + ConfigOnly: + description: | + Creates a config-only network. Config-only networks are placeholder + networks for network configurations to be used by other networks. + Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false + example: false + ConfigFrom: + description: | + Specifies the source which will provide the configuration for + this network. The specified network must be an existing + config-only network; see ConfigOnly. + $ref: "#/definitions/ConfigReference" IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" From 53542fefd57bae3c92075209647ac7ecd3ea0fc7 Mon Sep 17 00:00:00 2001 From: Sebastiaan van Stijn Date: Mon, 27 May 2024 21:09:04 +0200 Subject: [PATCH 6/7] api: swagger: Network: add Peers Add documentation for the Peers field. Signed-off-by: Sebastiaan van Stijn --- api/swagger.yaml | 27 ++++++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/api/swagger.yaml b/api/swagger.yaml index ef76b3e412587..29c645c59da7f 100644 --- a/api/swagger.yaml +++ b/api/swagger.yaml @@ -2206,7 +2206,7 @@ definitions: The name of the driver used to create the network (e.g. `bridge`, `overlay`). type: "string" - example: "bridge" + example: "overlay" EnableIPv6: description: | Whether the network was created with IPv6 enabled. @@ -2278,6 +2278,15 @@ definitions: example: com.example.some-label: "some-value" com.example.some-other-label: "some-other-value" + Peers: + description: | + List of peer nodes for an overlay network. This field is only present + for overlay networks, and omitted for other network types. + type: "array" + items: + $ref: "#/definitions/PeerInfo" + x-nullable: true + # TODO: Add Services (only present when "verbose" is set). ConfigReference: description: | @@ -2355,6 +2364,22 @@ definitions: type: "string" example: "" + PeerInfo: + description: | + PeerInfo represents one peer of an overlay network. + type: "object" + properties: + Name: + description: + ID of the peer-node in the Swarm cluster. + type: "string" + example: "6869d7c1732b" + IP: + description: + IP-address of the peer-node in the Swarm cluster. + type: "string" + example: "10.133.77.91" + BuildInfo: type: "object" properties: From 69f1e2a9239bc62232d457fbbfe3008b3098beed Mon Sep 17 00:00:00 2001 From: Sebastiaan van Stijn Date: Mon, 27 May 2024 21:26:18 +0200 Subject: [PATCH 7/7] docs/api: add Scope, ConfigOnly, ConfigFrom, Peers (v1.41 - v1.45) - api: swagger: Network: inline examples, and add ConfigOnly, ConfigFrom These fields were added in 9ee7b4dda926a1444dc0ea50c4ca6d90c8684060, but not documented in the API docs / swagger. Also move the example values per-field to reduce the risk of the example given from diverging with the actual struct that's used for the request. - api: swagger: POST /networks/create: document Scope, ConfigOnly, ConfigFrom Adds missing documentation for Scope, ConfigOnly, and ConfigFrom. The ConfigOnly and ConfigFrom fields were added in 9ee7b4dda926a1444dc0ea50c4ca6d90c8684060, but not documented in the API docs / swagger. - api: swagger: Network: add Peers Add documentation for the Peers field. Signed-off-by: Sebastiaan van Stijn --- docs/api/v1.41.yaml | 166 ++++++++++++++++++++++++++++++++++--------- docs/api/v1.42.yaml | 168 +++++++++++++++++++++++++++++++++++--------- docs/api/v1.43.yaml | 168 +++++++++++++++++++++++++++++++++++--------- docs/api/v1.44.yaml | 166 ++++++++++++++++++++++++++++++++++--------- docs/api/v1.45.yaml | 166 ++++++++++++++++++++++++++++++++++--------- 5 files changed, 662 insertions(+), 172 deletions(-) diff --git a/docs/api/v1.41.yaml b/docs/api/v1.41.yaml index f441fd5cf21c8..98487136f9d4c 100644 --- a/docs/api/v1.41.yaml +++ b/docs/api/v1.41.yaml @@ -2105,72 +2105,129 @@ definitions: type: "object" properties: Name: + description: | + Name of the network. type: "string" + example: "my_network" Id: + description: | + ID that uniquely identifies a network on a single machine. type: "string" + example: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" Created: + description: | + Date and time at which the network was created in + [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format with nano-seconds. type: "string" format: "dateTime" + example: "2016-10-19T04:33:30.360899459Z" Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level) type: "string" + example: "local" Driver: + description: | + The name of the driver used to create the network (e.g. `bridge`, + `overlay`). type: "string" + example: "overlay" EnableIPv6: + description: | + Whether the network was created with IPv6 enabled. type: "boolean" + example: false IPAM: $ref: "#/definitions/IPAM" Internal: + description: | + Whether the network is created to only allow internal networking + connectivity. type: "boolean" + default: false + example: false Attachable: + description: | + Wheter a global / swarm scope network is manually attachable by regular + containers from workers in swarm mode. type: "boolean" + default: false + example: false Ingress: + description: | + Whether the network is providing the routing-mesh for the swarm cluster. type: "boolean" + default: false + example: false + ConfigFrom: + $ref: "#/definitions/ConfigReference" + ConfigOnly: + description: | + Whether the network is a config-only network. Config-only networks are + placeholder networks for network configurations to be used by other + networks. Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false Containers: + description: | + Contains endpoints attached to the network. type: "object" additionalProperties: $ref: "#/definitions/NetworkContainer" + example: + 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: + Name: "test" + EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" + MacAddress: "02:42:ac:13:00:02" + IPv4Address: "172.19.0.2/16" + IPv6Address: "" Options: + description: | + Network-specific options uses when creating the network. type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: + description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "net01" - Id: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" - Created: "2016-10-19T04:33:30.360899459Z" - Scope: "local" - Driver: "bridge" - EnableIPv6: false - IPAM: - Driver: "default" - Config: - - Subnet: "172.19.0.0/16" - Gateway: "172.19.0.1" - Options: - foo: "bar" - Internal: false - Attachable: false - Ingress: false - Containers: - 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: - Name: "test" - EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" - MacAddress: "02:42:ac:13:00:02" - IPv4Address: "172.19.0.2/16" - IPv6Address: "" - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" + Peers: + description: | + List of peer nodes for an overlay network. This field is only present + for overlay networks, and omitted for other network types. + type: "array" + items: + $ref: "#/definitions/PeerInfo" + x-nullable: true + # TODO: Add Services (only present when "verbose" is set). + + ConfigReference: + description: | + The config-only network source to provide the configuration for + this network. + type: "object" + properties: + Network: + description: | + The name of the config-only network that provides the network's + configuration. The specified network must be an existing config-only + network. Only network names are allowed, not network IDs. + type: "string" + example: "config_only_network_01" + IPAM: type: "object" properties: @@ -2219,14 +2276,35 @@ definitions: properties: Name: type: "string" + example: "container_1" EndpointID: type: "string" + example: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" MacAddress: type: "string" + example: "02:42:ac:13:00:02" IPv4Address: type: "string" + example: "172.19.0.2/16" IPv6Address: type: "string" + example: "" + + PeerInfo: + description: | + PeerInfo represents one peer of an overlay network. + type: "object" + properties: + Name: + description: + ID of the peer-node in the Swarm cluster. + type: "string" + example: "6869d7c1732b" + IP: + description: + IP-address of the peer-node in the Swarm cluster. + type: "string" + example: "10.133.77.91" BuildInfo: type: "object" @@ -9559,6 +9637,11 @@ paths: type: "string" default: "bridge" example: "bridge" + Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level). + type: "string" Internal: description: "Restrict external access to the network." type: "boolean" @@ -9574,6 +9657,21 @@ paths: in swarm mode. type: "boolean" example: false + ConfigOnly: + description: | + Creates a config-only network. Config-only networks are placeholder + networks for network configurations to be used by other networks. + Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false + example: false + ConfigFrom: + description: | + Specifies the source which will provide the configuration for + this network. The specified network must be an existing + config-only network; see ConfigOnly. + $ref: "#/definitions/ConfigReference" IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" diff --git a/docs/api/v1.42.yaml b/docs/api/v1.42.yaml index f63d541468b3b..57876d5436c30 100644 --- a/docs/api/v1.42.yaml +++ b/docs/api/v1.42.yaml @@ -2113,72 +2113,129 @@ definitions: type: "object" properties: Name: + description: | + Name of the network. type: "string" + example: "my_network" Id: + description: | + ID that uniquely identifies a network on a single machine. type: "string" + example: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" Created: + description: | + Date and time at which the network was created in + [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format with nano-seconds. type: "string" format: "dateTime" + example: "2016-10-19T04:33:30.360899459Z" Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level) type: "string" + example: "local" Driver: + description: | + The name of the driver used to create the network (e.g. `bridge`, + `overlay`). type: "string" + example: "overlay" EnableIPv6: + description: | + Whether the network was created with IPv6 enabled. type: "boolean" + example: false IPAM: $ref: "#/definitions/IPAM" Internal: + description: | + Whether the network is created to only allow internal networking + connectivity. type: "boolean" + default: false + example: false Attachable: + description: | + Wheter a global / swarm scope network is manually attachable by regular + containers from workers in swarm mode. type: "boolean" + default: false + example: false Ingress: + description: | + Whether the network is providing the routing-mesh for the swarm cluster. type: "boolean" + default: false + example: false + ConfigFrom: + $ref: "#/definitions/ConfigReference" + ConfigOnly: + description: | + Whether the network is a config-only network. Config-only networks are + placeholder networks for network configurations to be used by other + networks. Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false Containers: + description: | + Contains endpoints attached to the network. type: "object" additionalProperties: $ref: "#/definitions/NetworkContainer" + example: + 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: + Name: "test" + EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" + MacAddress: "02:42:ac:13:00:02" + IPv4Address: "172.19.0.2/16" + IPv6Address: "" Options: + description: | + Network-specific options uses when creating the network. type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: + description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "net01" - Id: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" - Created: "2016-10-19T04:33:30.360899459Z" - Scope: "local" - Driver: "bridge" - EnableIPv6: false - IPAM: - Driver: "default" - Config: - - Subnet: "172.19.0.0/16" - Gateway: "172.19.0.1" - Options: - foo: "bar" - Internal: false - Attachable: false - Ingress: false - Containers: - 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: - Name: "test" - EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" - MacAddress: "02:42:ac:13:00:02" - IPv4Address: "172.19.0.2/16" - IPv6Address: "" - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" + Peers: + description: | + List of peer nodes for an overlay network. This field is only present + for overlay networks, and omitted for other network types. + type: "array" + items: + $ref: "#/definitions/PeerInfo" + x-nullable: true + # TODO: Add Services (only present when "verbose" is set). + + ConfigReference: + description: | + The config-only network source to provide the configuration for + this network. + type: "object" + properties: + Network: + description: | + The name of the config-only network that provides the network's + configuration. The specified network must be an existing config-only + network. Only network names are allowed, not network IDs. + type: "string" + example: "config_only_network_01" + IPAM: type: "object" properties: @@ -2227,14 +2284,35 @@ definitions: properties: Name: type: "string" + example: "container_1" EndpointID: type: "string" + example: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" MacAddress: type: "string" + example: "02:42:ac:13:00:02" IPv4Address: type: "string" + example: "172.19.0.2/16" IPv6Address: type: "string" + example: "" + + PeerInfo: + description: | + PeerInfo represents one peer of an overlay network. + type: "object" + properties: + Name: + description: + ID of the peer-node in the Swarm cluster. + type: "string" + example: "6869d7c1732b" + IP: + description: + IP-address of the peer-node in the Swarm cluster. + type: "string" + example: "10.133.77.91" BuildInfo: type: "object" @@ -6534,7 +6612,7 @@ paths: StopSignal: "SIGTERM" StopTimeout: 10 Created: "2015-01-06T15:47:31.485331387Z" - Driver: "devicemapper" + Driver: "overlay2" ExecIDs: - "b35395de42bc8abd327f9dd65d913b9ba28c74d2f0734eeeae84fa1c616a0fca" - "3fc1232e5cd20c8de182ed81178503dc6437f4e7ef12b52cc5e8de020652f1c4" @@ -9937,6 +10015,11 @@ paths: type: "string" default: "bridge" example: "bridge" + Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level). + type: "string" Internal: description: "Restrict external access to the network." type: "boolean" @@ -9952,6 +10035,21 @@ paths: in swarm mode. type: "boolean" example: false + ConfigOnly: + description: | + Creates a config-only network. Config-only networks are placeholder + networks for network configurations to be used by other networks. + Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false + example: false + ConfigFrom: + description: | + Specifies the source which will provide the configuration for + this network. The specified network must be an existing + config-only network; see ConfigOnly. + $ref: "#/definitions/ConfigReference" IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" diff --git a/docs/api/v1.43.yaml b/docs/api/v1.43.yaml index 8927087c3ce22..5816567960bfe 100644 --- a/docs/api/v1.43.yaml +++ b/docs/api/v1.43.yaml @@ -2144,72 +2144,129 @@ definitions: type: "object" properties: Name: + description: | + Name of the network. type: "string" + example: "my_network" Id: + description: | + ID that uniquely identifies a network on a single machine. type: "string" + example: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" Created: + description: | + Date and time at which the network was created in + [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format with nano-seconds. type: "string" format: "dateTime" + example: "2016-10-19T04:33:30.360899459Z" Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level) type: "string" + example: "local" Driver: + description: | + The name of the driver used to create the network (e.g. `bridge`, + `overlay`). type: "string" + example: "overlay" EnableIPv6: + description: | + Whether the network was created with IPv6 enabled. type: "boolean" + example: false IPAM: $ref: "#/definitions/IPAM" Internal: + description: | + Whether the network is created to only allow internal networking + connectivity. type: "boolean" + default: false + example: false Attachable: + description: | + Wheter a global / swarm scope network is manually attachable by regular + containers from workers in swarm mode. type: "boolean" + default: false + example: false Ingress: + description: | + Whether the network is providing the routing-mesh for the swarm cluster. type: "boolean" + default: false + example: false + ConfigFrom: + $ref: "#/definitions/ConfigReference" + ConfigOnly: + description: | + Whether the network is a config-only network. Config-only networks are + placeholder networks for network configurations to be used by other + networks. Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false Containers: + description: | + Contains endpoints attached to the network. type: "object" additionalProperties: $ref: "#/definitions/NetworkContainer" + example: + 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: + Name: "test" + EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" + MacAddress: "02:42:ac:13:00:02" + IPv4Address: "172.19.0.2/16" + IPv6Address: "" Options: + description: | + Network-specific options uses when creating the network. type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: + description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "net01" - Id: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" - Created: "2016-10-19T04:33:30.360899459Z" - Scope: "local" - Driver: "bridge" - EnableIPv6: false - IPAM: - Driver: "default" - Config: - - Subnet: "172.19.0.0/16" - Gateway: "172.19.0.1" - Options: - foo: "bar" - Internal: false - Attachable: false - Ingress: false - Containers: - 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: - Name: "test" - EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" - MacAddress: "02:42:ac:13:00:02" - IPv4Address: "172.19.0.2/16" - IPv6Address: "" - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" + Peers: + description: | + List of peer nodes for an overlay network. This field is only present + for overlay networks, and omitted for other network types. + type: "array" + items: + $ref: "#/definitions/PeerInfo" + x-nullable: true + # TODO: Add Services (only present when "verbose" is set). + + ConfigReference: + description: | + The config-only network source to provide the configuration for + this network. + type: "object" + properties: + Network: + description: | + The name of the config-only network that provides the network's + configuration. The specified network must be an existing config-only + network. Only network names are allowed, not network IDs. + type: "string" + example: "config_only_network_01" + IPAM: type: "object" properties: @@ -2258,14 +2315,35 @@ definitions: properties: Name: type: "string" + example: "container_1" EndpointID: type: "string" + example: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" MacAddress: type: "string" + example: "02:42:ac:13:00:02" IPv4Address: type: "string" + example: "172.19.0.2/16" IPv6Address: type: "string" + example: "" + + PeerInfo: + description: | + PeerInfo represents one peer of an overlay network. + type: "object" + properties: + Name: + description: + ID of the peer-node in the Swarm cluster. + type: "string" + example: "6869d7c1732b" + IP: + description: + IP-address of the peer-node in the Swarm cluster. + type: "string" + example: "10.133.77.91" BuildInfo: type: "object" @@ -6567,7 +6645,7 @@ paths: StopSignal: "SIGTERM" StopTimeout: 10 Created: "2015-01-06T15:47:31.485331387Z" - Driver: "devicemapper" + Driver: "overlay2" ExecIDs: - "b35395de42bc8abd327f9dd65d913b9ba28c74d2f0734eeeae84fa1c616a0fca" - "3fc1232e5cd20c8de182ed81178503dc6437f4e7ef12b52cc5e8de020652f1c4" @@ -9955,6 +10033,11 @@ paths: type: "string" default: "bridge" example: "bridge" + Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level). + type: "string" Internal: description: "Restrict external access to the network." type: "boolean" @@ -9970,6 +10053,21 @@ paths: in swarm mode. type: "boolean" example: false + ConfigOnly: + description: | + Creates a config-only network. Config-only networks are placeholder + networks for network configurations to be used by other networks. + Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false + example: false + ConfigFrom: + description: | + Specifies the source which will provide the configuration for + this network. The specified network must be an existing + config-only network; see ConfigOnly. + $ref: "#/definitions/ConfigReference" IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" diff --git a/docs/api/v1.44.yaml b/docs/api/v1.44.yaml index 95a63555afb94..9144a0c8bbd89 100644 --- a/docs/api/v1.44.yaml +++ b/docs/api/v1.44.yaml @@ -2171,72 +2171,129 @@ definitions: type: "object" properties: Name: + description: | + Name of the network. type: "string" + example: "my_network" Id: + description: | + ID that uniquely identifies a network on a single machine. type: "string" + example: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" Created: + description: | + Date and time at which the network was created in + [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format with nano-seconds. type: "string" format: "dateTime" + example: "2016-10-19T04:33:30.360899459Z" Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level) type: "string" + example: "local" Driver: + description: | + The name of the driver used to create the network (e.g. `bridge`, + `overlay`). type: "string" + example: "overlay" EnableIPv6: + description: | + Whether the network was created with IPv6 enabled. type: "boolean" + example: false IPAM: $ref: "#/definitions/IPAM" Internal: + description: | + Whether the network is created to only allow internal networking + connectivity. type: "boolean" + default: false + example: false Attachable: + description: | + Wheter a global / swarm scope network is manually attachable by regular + containers from workers in swarm mode. type: "boolean" + default: false + example: false Ingress: + description: | + Whether the network is providing the routing-mesh for the swarm cluster. type: "boolean" + default: false + example: false + ConfigFrom: + $ref: "#/definitions/ConfigReference" + ConfigOnly: + description: | + Whether the network is a config-only network. Config-only networks are + placeholder networks for network configurations to be used by other + networks. Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false Containers: + description: | + Contains endpoints attached to the network. type: "object" additionalProperties: $ref: "#/definitions/NetworkContainer" + example: + 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: + Name: "test" + EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" + MacAddress: "02:42:ac:13:00:02" + IPv4Address: "172.19.0.2/16" + IPv6Address: "" Options: + description: | + Network-specific options uses when creating the network. type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: + description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "net01" - Id: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" - Created: "2016-10-19T04:33:30.360899459Z" - Scope: "local" - Driver: "bridge" - EnableIPv6: false - IPAM: - Driver: "default" - Config: - - Subnet: "172.19.0.0/16" - Gateway: "172.19.0.1" - Options: - foo: "bar" - Internal: false - Attachable: false - Ingress: false - Containers: - 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: - Name: "test" - EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" - MacAddress: "02:42:ac:13:00:02" - IPv4Address: "172.19.0.2/16" - IPv6Address: "" - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" + Peers: + description: | + List of peer nodes for an overlay network. This field is only present + for overlay networks, and omitted for other network types. + type: "array" + items: + $ref: "#/definitions/PeerInfo" + x-nullable: true + # TODO: Add Services (only present when "verbose" is set). + + ConfigReference: + description: | + The config-only network source to provide the configuration for + this network. + type: "object" + properties: + Network: + description: | + The name of the config-only network that provides the network's + configuration. The specified network must be an existing config-only + network. Only network names are allowed, not network IDs. + type: "string" + example: "config_only_network_01" + IPAM: type: "object" properties: @@ -2285,14 +2342,35 @@ definitions: properties: Name: type: "string" + example: "container_1" EndpointID: type: "string" + example: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" MacAddress: type: "string" + example: "02:42:ac:13:00:02" IPv4Address: type: "string" + example: "172.19.0.2/16" IPv6Address: type: "string" + example: "" + + PeerInfo: + description: | + PeerInfo represents one peer of an overlay network. + type: "object" + properties: + Name: + description: + ID of the peer-node in the Swarm cluster. + type: "string" + example: "6869d7c1732b" + IP: + description: + IP-address of the peer-node in the Swarm cluster. + type: "string" + example: "10.133.77.91" BuildInfo: type: "object" @@ -10119,6 +10197,11 @@ paths: type: "string" default: "bridge" example: "bridge" + Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level). + type: "string" Internal: description: "Restrict external access to the network." type: "boolean" @@ -10134,6 +10217,21 @@ paths: in swarm mode. type: "boolean" example: false + ConfigOnly: + description: | + Creates a config-only network. Config-only networks are placeholder + networks for network configurations to be used by other networks. + Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false + example: false + ConfigFrom: + description: | + Specifies the source which will provide the configuration for + this network. The specified network must be an existing + config-only network; see ConfigOnly. + $ref: "#/definitions/ConfigReference" IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM" diff --git a/docs/api/v1.45.yaml b/docs/api/v1.45.yaml index a123a810954e9..43a780e994684 100644 --- a/docs/api/v1.45.yaml +++ b/docs/api/v1.45.yaml @@ -2179,72 +2179,129 @@ definitions: type: "object" properties: Name: + description: | + Name of the network. type: "string" + example: "my_network" Id: + description: | + ID that uniquely identifies a network on a single machine. type: "string" + example: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" Created: + description: | + Date and time at which the network was created in + [RFC 3339](https://www.ietf.org/rfc/rfc3339.txt) format with nano-seconds. type: "string" format: "dateTime" + example: "2016-10-19T04:33:30.360899459Z" Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level) type: "string" + example: "local" Driver: + description: | + The name of the driver used to create the network (e.g. `bridge`, + `overlay`). type: "string" + example: "overlay" EnableIPv6: + description: | + Whether the network was created with IPv6 enabled. type: "boolean" + example: false IPAM: $ref: "#/definitions/IPAM" Internal: + description: | + Whether the network is created to only allow internal networking + connectivity. type: "boolean" + default: false + example: false Attachable: + description: | + Wheter a global / swarm scope network is manually attachable by regular + containers from workers in swarm mode. type: "boolean" + default: false + example: false Ingress: + description: | + Whether the network is providing the routing-mesh for the swarm cluster. type: "boolean" + default: false + example: false + ConfigFrom: + $ref: "#/definitions/ConfigReference" + ConfigOnly: + description: | + Whether the network is a config-only network. Config-only networks are + placeholder networks for network configurations to be used by other + networks. Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false Containers: + description: | + Contains endpoints attached to the network. type: "object" additionalProperties: $ref: "#/definitions/NetworkContainer" + example: + 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: + Name: "test" + EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" + MacAddress: "02:42:ac:13:00:02" + IPv4Address: "172.19.0.2/16" + IPv6Address: "" Options: + description: | + Network-specific options uses when creating the network. type: "object" additionalProperties: type: "string" + example: + com.docker.network.bridge.default_bridge: "true" + com.docker.network.bridge.enable_icc: "true" + com.docker.network.bridge.enable_ip_masquerade: "true" + com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" + com.docker.network.bridge.name: "docker0" + com.docker.network.driver.mtu: "1500" Labels: + description: "User-defined key/value metadata." type: "object" additionalProperties: type: "string" - example: - Name: "net01" - Id: "7d86d31b1478e7cca9ebed7e73aa0fdeec46c5ca29497431d3007d2d9e15ed99" - Created: "2016-10-19T04:33:30.360899459Z" - Scope: "local" - Driver: "bridge" - EnableIPv6: false - IPAM: - Driver: "default" - Config: - - Subnet: "172.19.0.0/16" - Gateway: "172.19.0.1" - Options: - foo: "bar" - Internal: false - Attachable: false - Ingress: false - Containers: - 19a4d5d687db25203351ed79d478946f861258f018fe384f229f2efa4b23513c: - Name: "test" - EndpointID: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" - MacAddress: "02:42:ac:13:00:02" - IPv4Address: "172.19.0.2/16" - IPv6Address: "" - Options: - com.docker.network.bridge.default_bridge: "true" - com.docker.network.bridge.enable_icc: "true" - com.docker.network.bridge.enable_ip_masquerade: "true" - com.docker.network.bridge.host_binding_ipv4: "0.0.0.0" - com.docker.network.bridge.name: "docker0" - com.docker.network.driver.mtu: "1500" - Labels: - com.example.some-label: "some-value" - com.example.some-other-label: "some-other-value" + example: + com.example.some-label: "some-value" + com.example.some-other-label: "some-other-value" + Peers: + description: | + List of peer nodes for an overlay network. This field is only present + for overlay networks, and omitted for other network types. + type: "array" + items: + $ref: "#/definitions/PeerInfo" + x-nullable: true + # TODO: Add Services (only present when "verbose" is set). + + ConfigReference: + description: | + The config-only network source to provide the configuration for + this network. + type: "object" + properties: + Network: + description: | + The name of the config-only network that provides the network's + configuration. The specified network must be an existing config-only + network. Only network names are allowed, not network IDs. + type: "string" + example: "config_only_network_01" + IPAM: type: "object" properties: @@ -2293,14 +2350,35 @@ definitions: properties: Name: type: "string" + example: "container_1" EndpointID: type: "string" + example: "628cadb8bcb92de107b2a1e516cbffe463e321f548feb37697cce00ad694f21a" MacAddress: type: "string" + example: "02:42:ac:13:00:02" IPv4Address: type: "string" + example: "172.19.0.2/16" IPv6Address: type: "string" + example: "" + + PeerInfo: + description: | + PeerInfo represents one peer of an overlay network. + type: "object" + properties: + Name: + description: + ID of the peer-node in the Swarm cluster. + type: "string" + example: "6869d7c1732b" + IP: + description: + IP-address of the peer-node in the Swarm cluster. + type: "string" + example: "10.133.77.91" BuildInfo: type: "object" @@ -10121,6 +10199,11 @@ paths: type: "string" default: "bridge" example: "bridge" + Scope: + description: | + The level at which the network exists (e.g. `swarm` for cluster-wide + or `local` for machine level). + type: "string" Internal: description: "Restrict external access to the network." type: "boolean" @@ -10136,6 +10219,21 @@ paths: in swarm mode. type: "boolean" example: false + ConfigOnly: + description: | + Creates a config-only network. Config-only networks are placeholder + networks for network configurations to be used by other networks. + Config-only networks cannot be used directly to run containers + or services. + type: "boolean" + default: false + example: false + ConfigFrom: + description: | + Specifies the source which will provide the configuration for + this network. The specified network must be an existing + config-only network; see ConfigOnly. + $ref: "#/definitions/ConfigReference" IPAM: description: "Optional custom IP scheme for the network." $ref: "#/definitions/IPAM"