请教多台M1设备连接HA的方法。

[luz83o]

发现以一下代码添加多台后，有错误提示。MAC地址已经修改，但还是一直提示名字冲突。

第一台代码：
light:
name: zm1_b0f89326ff10_brightness
unique_id: zm1_b0f89326ff10_brightness
schema: template
command_topic: "device/zm1/b0f89326ff10/set"
state_topic: "device/zm1/b0f89326ff10/state"
command_on_template: >
{"mac": "b0f89326ff10"
{%- if brightness is defined -%}
, "brightness": {{ ((brightness-1) / 64 )|int +1 }}
{%- else -%}
, "brightness": 4
{%- endif -%}
}
command_off_template: '{"mac": "b0f89326ff10", "brightness": 0}'
state_template: >
{%- if value_json.brightness == 0 -%}
off
{%- else -%}
on
{%- endif -%}
brightness_template: >
{%- if value_json.brightness is defined -%}
{{ ( value_json.brightness *64 )|int }}
{%- endif -%}

第二台代码：
light:
name: zm1_b0f89323adaa_brightness
unique_id: zm1_b0f89323adaa_brightness
schema: template
command_topic: "device/zm1/b0f89323adaa/set"
state_topic: "device/zm1/b0f89323adaa/state"
command_on_template: >
{"mac": "b0f89323adaa"
{%- if brightness is defined -%}
, "brightness": {{ ((brightness-1) / 64 )|int +1 }}
{%- else -%}
, "brightness": 4
{%- endif -%}
}
command_off_template: '{"mac": "b0f89323adaa", "brightness": 0}'
state_template: >
{%- if value_json.brightness == 0 -%}
off
{%- else -%}
on
{%- endif -%}
brightness_template: >
{%- if value_json.brightness is defined -%}
{{ ( value_json.brightness *64 )|int }}
{%- endif -%}

请教还需要修改哪里？

[a2633063]

请贴错误提示,正常不会有重复的提示

[luz83o]

请贴错误提示,正常不会有重复的提示

感谢你的回复，已经发现问题了。有同样问题的朋友可以参考下面的代码。

第一台代码：

• name: zm1_b0f89326ff10_brightness
  unique_id: zm1_b0f89326ff10_brightness
  第二台代码：
• name: zm1_b0f89323adaa_brightness
  unique_id: zm1_b0f89323adaa_brightness

[Darkcat222151]

light:
#第一台设备
name: zm1_b0f89321a1d6_brightness
unique_id: zm1_b0f89321a1d6_brightness
schema: template
command_topic: "device/zm1/b0f89321a1d6/set"
state_topic: "device/zm1/b0f89321a1d6/state"
command_on_template: >
{"mac": "b0f89321a1d6"
{%- if brightness is defined -%}
, "brightness": {{ ((brightness-1) / 64 )|int +1 }}
{%- else -%}
, "brightness": 4
{%- endif -%}
}
command_off_template: '{"mac": "b0f89321a1d6", "brightness": 0}'
state_template: >
{%- if value_json.brightness == 0 -%}
off
{%- else -%}
on
{%- endif -%}
brightness_template: >
{%- if value_json.brightness is defined -%}
{{ ( value_json.brightness *64 )|int }}
{%- endif -%}
#第二台设备
name: zm1_b0f8931ea081_brightness
unique_id: zm1_b0f8931ea081_brightness
schema: template
command_topic: "device/zm1/b0f8931ea081/set"
state_topic: "device/zm1/b0f8931ea081/state"
command_on_template: >
{"mac": "b0f8931ea081"
{%- if brightness is defined -%}
, "brightness": {{ ((brightness-1) / 64 )|int +1 }}
{%- else -%}
, "brightness": 4
{%- endif -%}
}
command_off_template: '{"mac": "b0f8931ea081", "brightness": 0}'
state_template: >
{%- if value_json.brightness == 0 -%}
off
{%- else -%}
on
{%- endif -%}
brightness_template: >
{%- if value_json.brightness is defined -%}
{{ ( value_json.brightness *64 )|int }}
{%- endif -%}

请问您知道为什么多台zmi的设备显示控制和亮度开关只能最后一个有效呢？甲醛什么的都拾取正常。

[Darkcat222151]

问题已经解决，多个light
命令应如下格式
light：

• name：XXXXX
  ...
  #已有第一个是设备的教程的代码
• name：XXXXX
  ...
  #已有第二个是设备的教程的代码
  #后续以此类推。需要注意格式

[Darkcat222151]

这里小横杠打不出来，变成点了。。。。