Skip to content

Latest commit

 

History

History
371 lines (266 loc) · 20.1 KB

README.adoc

File metadata and controls

371 lines (266 loc) · 20.1 KB

Substrate

1. Intro

Next-generation framework for blockchain innovation.

2. Description

At its heart, Substrate is a combination of three technologies: WebAssembly, Libp2p and AfG Consensus. It is both a library for building new blockchains and a "skeleton key" of a blockchain client, able to synchronise to any Substrate-based chain.

Substrate chains have three distinct features that make them "next-generation": a dynamic, self-defining state-transition function; light-client functionality from day one; and a progressive consensus algorithm with fast block production and adaptive, definite finality. The STF, encoded in WebAssembly, is known as the "runtime". This defines the execute_block function, and can specify everything from the staking algorithm, transaction semantics, logging mechanisms and procedures for replacing any aspect of itself or of the blockchain’s state ("governance"). Because the runtime is entirely dynamic all of these can be switched out or upgraded at any time. A Substrate chain is very much a "living organism".

3. Usage

Substrate is still an early stage project, and while it has already been used as the basis of major projects like Polkadot, using it is still a significant undertaking. In particular, you should have a good knowledge of blockchain concepts and basic cryptography. Terminology like header, block, client, hash, transaction and signature should be familiar. At present you will need a working knowledge of Rust to be able to do anything interesting (though eventually, we aim for this not to be the case).

Substrate is designed to be used in one of three ways:

  1. Trivial: By running the Substrate binary substrate and configuring it with a genesis block that includes the current demonstration runtime. In this case, you just build Substrate, configure a JSON file and launch your own blockchain. This affords you the least amount of customisability, primarily allowing you to change the genesis parameters of the various included runtime modules such as balances, staking, block-period, fees and governance.

  2. Modular: By hacking together modules from the Substrate Runtime Module Library into a new runtime and possibly altering or reconfiguring the Substrate client’s block authoring logic. This affords you a very large amount of freedom over your own blockchain’s logic, letting you change datatypes, add or remove modules and, crucially, add your own modules. Much can be changed without touching the block-authoring logic (since it is generic). If this is the case, then the existing Substrate binary can be used for block authoring and syncing. If the block authoring logic needs to be tweaked, then a new altered block-authoring binary must be built as a separate project and used by validators. This is how the Polkadot relay chain is built and should suffice for almost all circumstances in the near to mid-term.

  3. Generic: The entire Substrate Runtime Module Library can be ignored and the entire runtime designed and implemented from scratch. If desired, this can be done in a language other than Rust, providing it can target WebAssembly. If the runtime can be made to be compatible with the existing client’s block authoring logic, then you can simply construct a new genesis block from your Wasm blob and launch your chain with the existing Rust-based Substrate client. If not, then you’ll need to alter the client’s block authoring logic accordingly. This is probably a useless option for most projects right now, but provides complete flexibility allowing for a long-term far-reaching upgrade path for the Substrate paradigm.

3.1. The Basics of Substrate

Substrate is a blockchain platform with a completely generic state transition function. That said, it does come with both standards and conventions (particularly regarding the Runtime Module Library) regarding underlying datastructures. Roughly speaking, these core datatypes correspond to +trait+s in terms of the actual non-negotiable standard and generic +struct+s in terms of the convention.

Header := Parent + ExtrinsicsRoot + StorageRoot + Digest
Block := Header + Extrinsics + Justifications

3.2. Extrinsics

Extrinsics in Substrate are pieces of information from "the outside world" that are contained in the blocks of the chain. You might think "ahh, that means transactions": in fact, no. Extrinsics fall into two broad categories of which only one is transactions. The other is known as inherents. The difference between these two is that transactions are signed and gossipped on the network and can be deemed useful per se. This fits the mould of what you would call transactions in Bitcoin or Ethereum.

Inherents, meanwhile, are not passed on the network and are not signed. They represent data which describes the environment but which cannot call upon anything to prove it such as a signature. Rather they are assumed to be "true" simply because a sufficiently large number of validators have agreed on them being reasonable.

To give an example, there is the timestamp inherent, which sets the current timestamp of the block. This is not a fixed part of Substrate, but does come as part of the Substrate Runtime Module Library to be used as desired. No signature could fundamentally prove that a block were authored at a given time in quite the same way that a signature can "prove" the desire to spend some particular funds. Rather, it is the business of each validator to ensure that they believe the timestamp is set to something reasonable before they agree that the block candidate is valid.

Other examples include the parachain-heads extrinsic in Polkadot and the "note-missed-proposal" extrinsic used in the Substrate Runtime Module Library to determine and punish or deactivate offline validators.

3.3. Runtime and API

Substrate chains all have a runtime. The runtime is a WebAssembly "blob" that includes a number of entry-points. Some entry-points are required as part of the underlying Substrate specification. Others are merely convention and required for the default implementation of the Substrate client to be able to author blocks. In short these two sets are:

The runtime is API entry points are expected to be in the runtime’s api module. There is a specific ABI based upon the Substrate Simple Codec (codec), which is used to encode and decode the arguments for these functions and specify where and how they should be passed. A special macro is provided called impl_stubs, which prepares all functionality for marshalling arguments and basically just allows you to write the functions as you would normally (except for the fact that there must be example one argument - tuples are allowed to workaround).

Here’s the Polkadot API implementation as of PoC-2:

pub mod api {
	impl_stubs!(

		// Standard: Required.
		version => |()| super::Version::version(),
		authorities => |()| super::Consensus::authorities(),
		execute_block => |block| super::Executive::execute_block(block),

		// Conventional: Needed for Substrate client's reference block authoring logic to work.
		initialise_block => |header| super::Executive::initialise_block(&header),
		apply_extrinsic => |extrinsic| super::Executive::apply_extrinsic(extrinsic),
		finalise_block => |()| super::Executive::finalise_block(),
		inherent_extrinsics => |inherent| super::inherent_extrinsics(inherent),

		// Non-standard (Polkadot-specific). This just exposes some stuff that Polkadot client
		// finds useful.
		validator_count => |()| super::Session::validator_count(),
		validators => |()| super::Session::validators()
	);
}

As you can see, at the minimum there are only three API calls to implement. If you want to reuse as much of Substrate’s reference block authoring client code, then you’ll want to provide the next four entrypoints (though three of them you probably already implemented as part of execute_block).

Of the first three, there is execute_block, which contains the actions to be taken to execute a block and pretty much defines the blockchain. Then there is authorities which tells the AfG consensus algorithm sitting in the Substrate client who the given authorities (known as "validators" in some contexts) are that can finalise the next block. Finally, there is version, which is a fairly sophisticated version identifier. This includes a key distinction between specification version and authoring version, with the former essentially versioning the logic of execute_block and the latter versioning only the logic of inherent_extrinsics and core aspects of extrinsic validity.

3.4. Inherent Extrinsics

The Substrate Runtime Module Library includes functionality for timestamps and slashing. If used, these rely on "trusted" external information being passed in via inherent extrinsics. The Substrate reference block authoring client software will expect to be able to call into the runtime API with collated data (in the case of the reference Substrate authoring client, this is merely the current timestamp and which nodes were offline) in order to return the appropriate extrinsics ready for inclusion. If new inherent extrinsic types and data are to be used in a modified runtime, then it is this function (and its argument type) that would change.

3.5. Block-authoring Logic

In Substrate, there is a major distinction between blockchain syncing and block authoring ("authoring" is a more general term for what is called "mining" in Bitcoin). The first case might be referred to as a "full node" (or "light node" - Substrate supports both): authoring necessarily requires a synced node and, therefore, all authoring clients must necessarily be able to synchronise. However, the reverse is not true. The primary functionality that authoring nodes have which is not in "sync nodes" is threefold: transaction queue logic, inherent transaction knowledge and BFT consensus logic. BFT consensus logic is provided as a core element of Substrate and can be ignored since it is only exposed in the SDK under the authorities() API entry.

Transaction queue logic in Substrate is designed to be as generic as possible, allowing a runtime to express which transactions are fit for inclusion in a block through the initialize_block and apply_extrinsic calls. However, more subtle aspects like prioritisation and replacement policy must currently be expressed "hard coded" as part of the blockchain’s authoring code. That said, Substrate’s reference implementation for a transaction queue should be sufficient for an initial chain implementation.

Inherent extrinsic knowledge is again somewhat generic, and the actual construction of the extrinsics is, by convention, delegated to the "soft code" in the runtime. If ever there needs to be additional extrinsic information in the chain, then both the block authoring logic will need to be altered to provide it into the runtime and the runtime’s inherent_extrinsics call will need to use this extra information in order to construct any additional extrinsic transactions for inclusion in the block.

4. Roadmap

4.1. So far

  • 0.1 "PoC-1": PBFT consensus, Wasm runtime engine, basic runtime modules.

  • 0.2 "PoC-2": Libp2p

4.2. In progress

  • AfG consensus

  • Improved PoS

  • Smart contract runtime module

4.3. The future

  • Splitting out runtime modules into separate repo

  • Introduce substrate executable (the skeleton-key runtime)

  • Introduce basic but extensible transaction queue and block-builder and place them in the executable.

  • DAO runtime module

  • Audit

5. Trying out Substrate Node

Substate Node is Substrate’s pre-baked blockchain client. You can run a development node locally or configure a new chain and launch your own global testnet.

5.1. On Mac and Ubuntu

To get going as fast as possible, there is a simple script that installs all required dependencies and installs Substrate into your path. Just open a terminal and run:

curl https://getsubstrate.io -sSf | bash

You can start a local Substrate development chain with running substrate --dev.

To create your own global network/cryptocurrency, you’ll need to make a new Substrate Node chain specification file ("chainspec").

First let’s get a template chainspec that you can edit. We’ll use the "staging" chain, a sort of default chain that the node comes pre-configured with:

substrate --chain=staging build-spec > ~/chainspec.json

Now, edit ~/chainspec.json in your editor. There are a lot of individual fields for each module, and one very large one which contains the Webassembly code blob for this chain. The easiest field to edit is the block period. Change it to 10 (seconds):

     "timestamp": {
        "period": 10
      },

Now with this new chainspec file, you can build a "raw" chain definition for your new chain:

substrate build-spec --chain ~/chainspec.json --raw > ~/mychain.json

This can be fed into Substrate:

substrate --chain ~/mychain.json

It won’t do much until you start producing blocks though, so to do that you’ll need to use the --validator option together with passing the seed for the account(s) that is configured to be the initial authorities:

substrate --chain ~/mychain.json --validator --key ...

You can distribute mychain.json so that everyone can synchronise and (depending on your authorities list) validate on your chain.

6. Building

6.1. Hacking on Substrate

If you’d actually like hack on Substrate, you can just grab the source code and build it. Ensure you have Rust and the support software installed:

curl https://sh.rustup.rs -sSf | sh
rustup update nightly
rustup target add wasm32-unknown-unknown --toolchain nightly
rustup update stable
cargo install --git https://github.com/alexcrichton/wasm-gc

You will also need to install the following packages:

  • Linux:

    sudo apt install cmake pkg-config libssl-dev git clang libclang-dev
  • Mac:

    brew install cmake pkg-config openssl git llvm

Then, grab the Substrate source code:

git clone https://github.com/paritytech/substrate.git
cd substrate

Then build the code:

./scripts/build.sh  		# Builds the WebAssembly binaries
cargo build 				# Builds all native code

You can run the tests if you like:

cargo test --all

You can start a development chain with:

cargo run -- --dev

Or you can join the BBQ Birch Testnet with:

cargo run

Detailed logs may be shown by running the node with the following environment variables set: RUST_LOG=debug RUST_BACKTRACE=1 cargo run — --dev.

If you want to see the multi-node consensus algorithm in action locally, then you can create a local testnet with two validator nodes for Alice and Bob, who are the initial authorities of the genesis chain specification that have been endowed with a testnet DOTs. We’ll give each node a name and expose them so they are listed on [Telemetry](https://telemetry.polkadot.io/#/Local%20Testnet). You’ll need two terminals windows open.

We’ll start Alice’s substrate node first on default TCP port 30333 with her chain database stored locally at /tmp/alice. The Bootnode ID of her node is QmQZ8TjTqeDj3ciwr93EJ95hxfDsb9pEYDizUAbWpigtQN, which is generated from the --node-key value that we specify below:

cargo run -- \
  --base-path /tmp/alice \
  --chain=local \
  --key Alice \
  --name "ALICE" \
  --node-key 0000000000000000000000000000000000000000000000000000000000000001 \
  --telemetry-url ws://telemetry.polkadot.io:1024 \
  --validator

In the second terminal, we’ll run the following to start Bob’s substrate node on a different TCP port of 30334, and with his chain database stored locally at /tmp/bob. We’ll specify a value for the --bootnodes option that will connect his node to Alice’s Bootnode ID on TCP port 30333:

cargo run -- \
  --base-path /tmp/bob \
  --bootnodes /ip4/127.0.0.1/tcp/30333/p2p/QmQZ8TjTqeDj3ciwr93EJ95hxfDsb9pEYDizUAbWpigtQN \
  --chain=local \
  --key Bob \
  --name "BOB" \
  --port 30334 \
  --telemetry-url ws://telemetry.polkadot.io:1024 \
  --validator

Additional Substate CLI usage options are available and may be shown by running cargo run — --help.

7. Documentation

7.1. Viewing documentation for Substrate packages

You can generate documentation for a Substrate Rust package and have it automatically open in your web browser using rustdoc with Cargo, (of the The Rustdoc Book), by running the the following command:

cargo doc --package <spec> --open

Replacing <spec> with one of the following (i.e. cargo doc --package substrate --open):

  • All Substrate Packages

    substrate
  • Substrate Core

    substrate, substrate-cli, substrate-client, substrate-client-db,
    substrate-consensus-common, substrate-consensus-rhd,
    substrate-executor, substrate-finality-grandpa, substrate-keyring, substrate-keystore, substrate-network,
    substrate-network-libp2p, substrate-primitives, substrate-rpc, substrate-rpc-servers,
    substrate-serializer, substrate-service, substrate-service-test, substrate-state-db,
    substrate-state-machine, substrate-telemetry, substrate-test-client,
    substrate-test-runtime, substrate-transaction-graph, substrate-transaction-pool,
    substrate-trie
  • Substrate Runtime

    sr-api, sr-io, sr-primitives, sr-sandbox, sr-std, sr-version
  • Substrate Runtime Module Library (SRML)

    srml-assets, srml-balances, srml-consensus, srml-contract, srml-council, srml-democracy, srml-example,
    srml-executive, srml-metadata, srml-session, srml-staking, srml-support, srml-system, srml-timestamp,
    srml-treasury
  • Node

    node-cli, node-consensus, node-executor, node-network, node-primitives, node-runtime
  • Subkey

    subkey

7.2. Contributing to documentation for Substrate packages

Document source code for Substrate packages by annotating the source code with documentation comments.

Example (generic):

/// Summary
///
/// Description
///
/// # Panics
///
/// # Errors
///
/// # Safety
///
/// # Examples
///
/// Summary of Example 1
///
/// ```rust
/// // insert example 1 code here
/// ```
///
  • Important notes:

    • Documentation comments must use annotations with a triple slash ///

    • Modules are documented using //!

//! Summary (of module)
//!
//! Description (of module)
  • Special section header is indicated with a hash #.

    • Panics section requires an explanation if the function triggers a panic

    • Errors section is for describing conditions under which a function of method returns Err(E) if it returns a Result<T, E>

    • Safety section requires an explanation if the function is unsafe

    • Examples section includes examples of using the function or method

  • Code block annotations for examples are included between triple graves, as shown above. Instead of including the programming language to use for syntax highlighting as the annotation after the triple graves, alternative annotations include the ignore, text, should_panic, or no_run.

  • Summary sentence is a short high level sinngle sentence of its functionality

  • Description paragraph is for details additional to the summary sentence

  • Missing documentation annotations may be used to identify where to generate warnings with ![warn(missing_docs)] or errors ![deny(missing_docs)]

  • Hide documentation for items with #[doc(hidden)]

7.3. Contributing to documentation (tests, extended examples, macros) for Substrate packages

The code block annotations in the # Example section may be used as documentation as tests and for extended examples.

  • Important notes:

    • Rustdoc will automatically add a main() wrapper around the code block to test it

    • Documentating macros.

    • Documentation as tests examples are included when running cargo test

8. Contributing

8.1. Contributing Guidelines

8.2. Contributor Code of Conduct

9. License