README.md

STM32F429I-DISCO

The STM32F429ZIT6 is a 180MHz Cortex-M4 operation with 2Mbit Flash memory and 256kbytes

Contents

Information
Environment Set-up
Install STLINK Tool
How to program a binary
Configuration Sets

Information

The board features:
- On-board ST-LINK/V2 for programming and debugging,
- On-board 64 Mbits (8 Mbytes) External SDRAM (1 Mbit x 16-bit x 4-bank)
- L3GD20, ST MEMS motion sensor, 3-axis digital output gyroscope,
- TFT 2.4" LCD, 262K color RGB, 240 x 320 pixels
- Touchscreen controller
- Two user LEDs and two push-buttons,
- USB OTG FS with micro-AB connector, and
- Easy access to most MCU pins.

Environment Set-up

This section covers board-specific environment set-up.
Please set TizenRT common environment, quick start, first before doing below.

Install STLINK Tool

This section covers installing ST-LINK/V2 tool on Linux.
ST-LINK/V2 tool is required for programming and debugging.
Please follow, (https://fishpepper.de/2016/09/16/installing-using-st-link-v2-to-flash-stm32-on-linux/)

How to program a binary

After building TizenRT, execute below command at $TIZENRT_BASEDIR/os folder.
See [Getting the sources] for how to set TIZENRT_BASEDIR.

./dbuild.sh download [Programming Option]

For example, ALL option makes complete set of binaries programmed.

./dbuild.sh download ALL

Configuration Sets

hello

This provides simple hello world application including kernel.

tc

This can be used to test kernel functionality of TizenRT