Web Server Configuration Guide
-
W232N Web Server Configuration Overview
-This document is a web server configuration guide for the W232N, an industrial Ethernet to RS232 data conversion device.
+W55RP20-S2E Web Server Configuration Overview
+This document is a web server configuration guide for the W55RP20-S2E, an industrial Ethernet to RS232 data conversion device.
Required Hardware and Software
Hardware
@@ -30,13 +30,14 @@HardwareWeb Server Config Supported Devices List
- W232N
+- W55RP20-S2E
- WIZ75xSR Series
-How to Configure in W232N Web server
+How to Configure in W55RP20-S2E Web server
Step 1: Setup the S2E to an IP in the same range as the PC
-After connecting the power and Ethernet cables to the W232N, run the Configuration Tool you downloaded from the 'Software' section above. Then, click the buttons in the order shown in the picture below to set the IP range to the same as the user's PC.
+After connecting the power and Ethernet cables to the W55RP20-S2E, run the Configuration Tool you downloaded from the 'Software' section above. Then, click the buttons in the order shown in the picture below to set the IP range to the same as the user's PC.
@@ -47,8 +48,8 @@ Step 3: Exploring the Configuration Feature
-(1) Get W232N information
-
Figure: Click the "Get Settings" button to load the information from the W232N |
(1) Get W55RP20-S2E information
+Figure: Click the "Get Settings" button to load the information from the W55RP20-S2E |
@@ -57,18 +58,18 @@
Figure: Device Name Field
-
Figure: Network Information Field for W232N |
Figure: Network Information Field for W55RP20-S2E |
-
Figure: Operation Mode and Port Field for W232N |
Figure: Operation Mode and Port Field for W55RP20-S2E |
-
Figure: UART Field for W232N |
Figure: UART Field for W55RP20-S2E |
-
(3) Set W232N information
-Figure: Click "Set Settings" and save the updated information for the W232N |