From 7bc9ea9e702cfd8156ff4dab92002c94ac6b62c0 Mon Sep 17 00:00:00 2001 From: pbsuper Date: Fri, 15 Mar 2024 22:59:45 +0100 Subject: [PATCH] better wording --- docs/general/belt-tensioning.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/general/belt-tensioning.md b/docs/general/belt-tensioning.md index c62b4e1..f9694d6 100644 --- a/docs/general/belt-tensioning.md +++ b/docs/general/belt-tensioning.md @@ -28,7 +28,7 @@ Recommended target acoustic frequency: - Printed version: Min 135Hz - Max 180Hz - CNC / Mellow kit: Min 150Hz - Max 189Hz -Put the gantry at 150mm's from the front and use the 2 short belts on the Front Left and Right side from Idler/motor to X gantry Pulley. Use the green sections to measure the Freq. +Put the gantry at 150mm's from the center of the Front left pulley to the center of the Pulley on the left side of the Gantry and use the 2 short belts on the Left and Right side from Idler/motor to X gantry Pulley. Use the green sections to measure the Freq. ![Belt_Tenstion](../assets/images/general/electronics/Belt_Tension330.png) @@ -41,6 +41,6 @@ Recommended target acoustic frequency: - Printed version: Min 135Hz - Max 180Hz - CNC / Mellow kit: Min 150Hz - Max 189Hz -Put at roughly 150mm's from the front and use the 2 short belts on the front Left and Right side from idler/motor to X gantry pulley. Use the green sections to measure the Freq. +Put the gantry at 150mm's from the center of the Front left pulley to the center of the Pulley on the left side of the Gantry and use the 2 short belts on the Left and Right side from Idler/motor to X gantry Pulley. Use the green sections to measure the Freq. ![Belt_Tenstion2](../assets/images/general/electronics/Belt_Tension235.png)