From 5b6c91c1f25a025c25ca9920c14a6198cf24b327 Mon Sep 17 00:00:00 2001
From: Remco Burema <r.burema@ultimaker.com>
Date: Fri, 8 Dec 2023 17:53:29 +0100
Subject: [PATCH] Revert "Add examples that still go wrong even if boost-input
 is fixed."

This reverts commit 8134f05c995238733eadea212ac3f43e65ff98de.
---
 stress_benchmark/resources/068.settings | 645 ------------------------
 stress_benchmark/resources/068.wkt      |   1 -
 stress_benchmark/resources/069.settings | 280 ----------
 stress_benchmark/resources/069.wkt      |   1 -
 4 files changed, 927 deletions(-)
 delete mode 100644 stress_benchmark/resources/068.settings
 delete mode 100644 stress_benchmark/resources/068.wkt
 delete mode 100644 stress_benchmark/resources/069.settings
 delete mode 100644 stress_benchmark/resources/069.wkt

diff --git a/stress_benchmark/resources/068.settings b/stress_benchmark/resources/068.settings
deleted file mode 100644
index 36584c9dc7..0000000000
--- a/stress_benchmark/resources/068.settings
+++ /dev/null
@@ -1,645 +0,0 @@
-support_interface_line_width=0.4
-machine_max_acceleration_y=9000
-gradual_infill_steps=0
-machine_height=300
-material_break_preparation_retracted_position=-16
-wall_0_wipe_dist=0.2
-speed_ironing=20.0
-prime_tower_brim_enable=True
-travel_speed=250
-bridge_skin_density_3=100
-draft_shield_dist=10
-infill_support_enabled=False
-material_flush_purge_length=60
-jerk_travel_enabled=False
-raft_interface_line_width=0.6000000000000001
-group_outer_walls=True
-wall_transition_length=0.4
-acceleration_travel=5000
-wall_overhang_speed_factor=100
-machine_nozzle_temp_enabled=True
-material_break_speed=25
-wipe_retraction_retract_speed=25
-extruder_prime_pos_z=2
-retraction_prime_speed=25
-print_sequence=all_at_once
-flow_rate_extrusion_offset_factor=100
-prime_tower_enable=True
-_plugin__curaenginetiledinfill__0_2_0__tile_size=8.2
-support_roof_line_distance=0.4
-machine_nozzle_head_distance=3
-support_bottom_distance=0
-brim_width=7
-speed_support_interface=20
-small_feature_speed_factor=50
-cutting_mesh=False
-material_adhesion_tendency=0
-small_feature_max_length=0.0
-material_no_load_move_factor=0.91
-mesh_position_x=0
-zig_zaggify_support=True
-inset_direction=outside_in
-wall_extruder_nr=-1
-jerk_wall=20
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_speed_wall=100
-meshfix_union_all_remove_holes=False
-meshfix_maximum_deviation=0.04
-material_is_support_material=False
-speed_equalize_flow_width_factor=110.0
-lightning_infill_overhang_angle=40
-wall_0_extruder_nr=-1
-top_bottom_thickness=1
-support_tree_top_rate=30
-machine_extruders_share_nozzle=False
-machine_steps_per_mm_z=50
-quality_name=Fine
-speed_print=70
-prime_tower_line_width=0.4
-roofing_monotonic=True
-wall_x_material_flow_roofing=100
-skirt_height=3
-machine_feeder_wheel_diameter=10.0
-jerk_print_layer_0=20
-infill_extruder_nr=-1
-bridge_sparse_infill_max_density=0
-jerk_layer_0=20
-meshfix_maximum_extrusion_area_deviation=50000
-material_bed_temp_prepend=True
-acceleration_wall_x_roofing=1500
-roofing_extruder_nr=-1
-speed_travel_layer_0=250
-support_bottom_enable=True
-support_extruder_nr_layer_0=1
-support_tower_roof_angle=0
-support_supported_skin_fan_speed=100
-infill_sparse_thickness=0.1
-support_tower_maximum_supported_diameter=3.0
-machine_endstop_positive_direction_y=False
-wall_overhang_angle=90
-machine_minimum_feedrate=0.0
-line_width=0.4
-top_bottom_extruder_nr=-1
-ironing_inset=0.38
-machine_acceleration=3000
-z_seam_x=116.5
-draft_shield_height_limitation=full
-speed_wall_0_roofing=20
-raft_surface_jerk=20
-switch_extruder_retraction_speed=20
-skirt_brim_material_flow=100
-infill_mesh_order=0
-acceleration_prime_tower=2000
-infill_multiplier=1
-raft_surface_thickness=0.1
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_speed_support_interface=50
-jerk_support_bottom=20
-jerk_support_interface=20
-raft_interface_extruder_nr=0
-_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled=False
-bridge_wall_coast=0
-z_seam_corner=z_seam_corner_none
-machine_max_feedrate_z=40
-speed_topbottom=30
-small_skin_on_surface=False
-machine_firmware_retract=False
-center_object=False
-wipe_retraction_speed=25
-support_tree_max_diameter=25
-bridge_skin_density_2=100
-support_bottom_line_width=0.4
-ooze_shield_angle=60
-initial_layer_line_width_factor=100.0
-layer_height_0=0.2
-retraction_count_max=25
-retraction_combing_max_distance=15
-z_seam_relative=False
-skin_outline_count=1
-support_interface_wall_count=1
-infill_sparse_density=20
-infill_overlap=0
-bridge_skin_speed_3=30
-mold_width=5
-material_final_print_temperature=185
-support_tree_rest_preference=graceful
-raft_acceleration=3500
-skin_preshrink=0.8
-infill_offset_y=0
-support_interface_pattern=zigzag
-infill_before_walls=True
-machine_steps_per_mm_e=1600
-sub_div_rad_add=0.4
-magic_spiralize=False
-fill_outline_gaps=True
-infill_pattern=triangles
-support_skip_zag_per_mm=20
-support_roof_extruder_nr=1
-ironing_enabled=False
-interlocking_orientation=22.5
-initial_bottom_layers=10
-machine_center_is_zero=False
-skirt_brim_extruder_nr=-1
-raft_base_extruder_nr=0
-connect_skin_polygons=False
-magic_fuzzy_skin_point_density=1.25
-speed_support_roof=20
-speed_wall_x_roofing=30
-acceleration_travel_layer_0=1428.5714285714287
-coasting_min_volume=0.8
-material_print_temperature_layer_0=200
-brim_outside_only=True
-slicing_tolerance=middle
-adaptive_layer_height_threshold=0.2
-machine_nozzle_size=0.4
-raft_base_jerk=20
-wall_line_width_0=0.4
-acceleration_support_roof=1500
-skin_line_width=0.4
-raft_base_fan_speed=0
-machine_heated_bed=True
-machine_max_feedrate_e=45
-meshfix_fluid_motion_shift_distance=0.1
-conical_overhang_hole_size=0
-jerk_travel=20
-retraction_combing=no_outer_surfaces
-material_shrinkage_percentage=100.0
-infill_line_distance=6.0
-bridge_settings_enabled=True
-ironing_flow=10.0
-material_initial_print_temperature=190
-machine_max_jerk_xy=20.0
-bottom_skin_preshrink=0.8
-wipe_repeat_count=5
-support_roof_line_width=0.4
-support_bottom_density=100
-infill_offset_x=0
-roofing_pattern=lines
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_spin_up_time=0.5
-support_extruder_nr=1
-conical_overhang_angle=50
-speed_print_layer_0=10.0
-cool_fan_speed_0=100
-support_tree_branch_diameter_angle=7
-support_bottom_offset=0.8
-raft_interface_line_spacing=0.8
-meshfix_union_all=True
-support_line_distance=0.5
-min_bead_width=0.34
-wipe_hop_speed=10
-wall_x_material_flow_layer_0=95.0
-support_enable=True
-raft_base_speed=15
-speed_travel=250
-blackmagic=0
-bridge_skin_material_flow=95.0
-acceleration_wall_0_roofing=429
-machine_max_jerk_e=5.0
-mesh_position_y=0
-gantry_height=60
-alternate_carve_order=True
-adaptive_layer_height_variation_step=0.01
-support_xy_distance_overhang=0.2
-cool_min_layer_time=6
-material_extrusion_cool_down_speed=0.7
-bottom_layers=10
-support_tower_diameter=3.0
-day=Fri
-support_mesh_drop_down=True
-raft_base_acceleration=3500
-raft_surface_line_spacing=0.4
-raft_interface_acceleration=3500
-speed_support_infill=25
-mesh_position_z=0
-wipe_move_distance=20
-layer_0_z_overlap=0.15
-jerk_roofing=20
-minimum_roof_area=1.0
-extruder_prime_pos_abs=True
-quality_changes_name=empty
-prime_tower_wipe_enabled=False
-speed_wall_x=30
-support_offset=0.8
-speed_roofing=30
-support_pattern=zigzag
-skin_edge_support_thickness=0.4
-raft_jerk=20
-support_xy_distance=0.7
-support_brim_width=1.2000000000000002
-support_bottom_stair_step_width=5.0
-material_crystallinity=False
-retraction_hop_only_when_collides=True
-dual=0
-bottom_skin_expand_distance=0.8
-skin_overlap_mm=0.04
-raft_surface_speed=30
-cool_min_layer_time_fan_speed_max=11
-prime_blob_enable=True
-support_roof_density=100
-speed=0
-brim_gap=0
-zig_zaggify_infill=True
-support_bottom_wall_count=1
-meshfix_fluid_motion_angle=15
-switch_extruder_prime_speed=20
-_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration=1
-small_skin_width=0.8
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_speed_wall_x=100
-jerk_wall_x=20
-coasting_volume=0.064
-min_odd_wall_line_width=0.34
-cool_fan_speed=100
-skin_material_flow=95.0
-speed_wall=30
-xy_offset_layer_0=-0.010000000000000002
-cool_min_temperature=190
-magic_fuzzy_skin_outside_only=False
-roofing_material_flow=100
-travel_avoid_supports=False
-support_zag_skip_count=40
-infill_mesh=False
-support_join_distance=2.0
-retraction_amount=6.5
-support_interface_density=100
-machine_max_acceleration_z=100
-acceleration_support_bottom=100
-cool_fan_speed_min=100
-machine_use_extruder_offset_to_offset_coords=True
-acceleration_wall_x=1500
-speed_layer_0=10.0
-top_thickness=1
-raft_smoothing=5
-machine_max_acceleration_x=9000
-machine_max_jerk_z=0.4
-raft_base_line_spacing=1.6
-support_roof_enable=True
-acceleration_enabled=True
-speed_slowdown_layers=1
-acceleration_roofing=1000
-top_bottom_pattern_0=lines
-machine_min_cool_heat_time_window=15
-machine_extruders_shared_nozzle_initial_retraction=0
-support_fan_enable=False
-prime_tower_position_y=188.2
-support_interface_skip_height=0.1
-max_extrusion_before_wipe=10
-acceleration_travel_enabled=False
-infill_enable_travel_optimization=False
-acceleration_support=2000
-bridge_skin_speed_2=30
-min_skin_width_for_expansion=6.123233995736766e-17
-bridge_fan_speed_3=100
-max_skin_angle_for_expansion=90
-switch_extruder_retraction_speeds=20
-jerk_support_infill=20
-support_conical_angle=30
-relative_extrusion=False
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_speed_skin=100
-ironing_pattern=zigzag
-wall_x_material_flow=100
-min_wall_line_width=0.34
-infill_wipe_dist=0
-bottom_thickness=1
-adaptive_layer_height_enabled=False
-raft_base_wall_count=1
-jerk_wall_0=20
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_speed_wall_0=100
-_plugin__curaenginetiledinfill__0_2_0__absolute_tiles=True
-cool_fan_speed_max=100
-retract_at_layer_change=False
-print_bed_temperature=60
-travel=0
-infill_material_flow=100
-wall_0_material_flow_layer_0=110.00000000000001
-skin_no_small_gaps_heuristic=False
-speed_z_hop=10
-support_tree_min_height_to_model=3
-retraction_hop_enabled=True
-extruders_enabled_count=2
-interlocking_beam_width=0.8
-support_tree_max_diameter_increase_by_merges_when_support_to_model=1
-jerk_print=20
-min_even_wall_line_width=0.34
-switch_extruder_extra_prime_amount=0
-magic_fuzzy_skin_enabled=False
-material_shrinkage_percentage_z=100.0
-retraction_enable=True
-retraction_extra_prime_amount=0
-magic_mesh_surface_mode=normal
-layer_start_x=213.0
-support_interface_material_flow=95.0
-meshfix_maximum_travel_resolution=0.8
-machine_max_feedrate_y=300
-top_bottom=0
-connect_infill_polygons=False
-jerk_support_roof=20
-default_material_bed_temperature=60
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_speed_infill=100
-jerk_infill=20
-cross_infill_pocket_size=6.0
-support_use_towers=True
-support_angle=45
-support=0
-magic_fuzzy_skin_thickness=0.3
-support_skip_some_zags=False
-bridge_skin_speed=30
-wall_thickness=0.8
-material_end_of_filament_purge_speed=0.5
-material_print_temperature=200
-layer_start_y=198.0
-_plugin__curaenginetiledinfill__0_2_0__tile_shape=hexagon
-_plugin__curaenginetiledinfill__0_2_0__maximum_size=10
-extruder_prime_pos_y=6
-min_infill_area=0
-prime_tower_position_x=185
-lightning_infill_support_angle=40
-retraction_speed=25
-prime_tower_base_curve_magnitude=4
-speed_support=25
-small_feature_speed_factor_0=50
-acceleration_topbottom=1000
-raft_base_line_width=0.8
-acceleration_print=3500
-wall_0_inset=0
-layer_height=0.1
-meshfix_keep_open_polygons=False
-raft_fan_speed=0
-support_interface_priority=interface_area_overwrite_support_area
-skin_edge_support_layers=4
-wipe_pause=0
-material_maximum_park_duration=7200
-support_interface_height=0.2
-support_roof_pattern=zigzag
-raft_surface_line_width=0.4
-draft_shield_height=10
-material_end_of_filament_purge_length=20
-mold_roof_height=0.5
-material=0
-support_infill_rate=80
-acceleration_wall_0=429
-support_tree_tip_diameter=0.8
-coasting_enable=False
-machine_steps_per_mm_x=50
-acceleration_wall=1500
-meshfix_maximum_resolution=0.5
-jerk_wall_x_roofing=20
-material_diameter=2.85
-raft_interface_speed=22.5
-acceleration_support_interface=1500
-machine_nozzle_cool_down_speed=0.75
-min_feature_size=0.1
-support_tree_branch_diameter=5
-lightning_infill_straightening_angle=40
-z_seam_y=215
-material_flow_layer_0=100
-raft_surface_fan_speed=100
-roofing_layer_count=1
-support_bottom_pattern=zigzag
-cool_min_speed=4
-resolution=0
-machine_nozzle_heat_up_speed=1.6
-machine_nozzle_expansion_angle=45
-material_break_temperature=60
-skirt_brim_line_width=0.4
-bridge_wall_speed=30
-support_interface_extruder_nr=1
-lightning_infill_prune_angle=40
-material_standby_temperature=100
-_plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration=1
-acceleration_layer_0=1000
-wipe_retraction_amount=6.5
-clean_between_layers=False
-raft_remove_inside_corners=False
-material_break_retracted_position=-50
-support_interface_offset=0.8
-draft_shield_enabled=False
-speed_wall_0=20
-brim_line_count=18
-support_bottom_material_flow=95.0
-cool_fan_enabled=True
-platform_adhesion=0
-wall_0_material_flow_roofing=100
-support_tree_bp_diameter=7.5
-bridge_wall_material_flow=100
-minimum_polygon_circumference=1.0
-retraction_retract_speed=25
-support_top_distance=0
-infill_overlap_mm=0.0
-jerk_skirt_brim=20
-retraction_min_travel=0.8
-support_bottom_extruder_nr=1
-bridge_skin_density=80
-bridge_skin_material_flow_2=95.0
-prime_tower_min_volume=6
-raft_airgap=0.3
-speed_support_bottom=20
-material_break_preparation_speed=50
-machine_scale_fan_speed_zero_to_one=False
-_plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size=0.2
-gradual_infill_step_height=1.5
-machine_steps_per_mm_y=50
-ooze_shield_dist=2
-support_roof_offset=0.8
-mold_enabled=False
-acceleration_support_infill=2000
-anti_overhang_mesh=False
-machine_max_acceleration_e=10000
-support_roof_wall_count=1
-support_brim_line_count=3
-travel_avoid_distance=3
-alternate_extra_perimeter=False
-material_bed_temperature_layer_0=60
-support_connect_zigzags=True
-ironing_line_spacing=0.1
-support_infill_extruder_nr=1
-interlocking_beam_layer_count=2
-skirt_line_count=1
-meshfix_fluid_motion_small_distance=0.01
-cool_fan_full_layer=2
-support_meshes_present=False
-jerk_travel_layer_0=20.0
-wall_line_width=0.4
-z_seam_position=back
-machine_heated_build_volume=False
-raft_speed=15
-raft_surface_extruder_nr=0
-roofing_line_width=0.4
-multiple_mesh_overlap=0
-infill_support_angle=40
-machine_endstop_positive_direction_z=True
-cool_fan_full_at_height=0.2
-material_brand=empty_brand
-extruder_prime_pos_x=9
-wipe_brush_pos_x=100
-machine_shape=rectangular
-support_conical_enabled=False
-material_alternate_walls=False
-bridge_fan_speed_2=100
-prime_tower_flow=100
-speed_infill=70
-skin_monotonic=False
-bridge_skin_material_flow_3=95.0
-support_wall_count=0
-raft_interface_jerk=20
-shell=0
-material_print_temp_wait=True
-carve_multiple_volumes=True
-support_roof_material_flow=95.0
-support_brim_enable=True
-command_line_settings=0
-raft_base_thickness=0.3
-support_bottom_stair_step_min_slope=10.0
-bridge_wall_min_length=2.1
-wall_0_material_flow=100
-coasting_speed=90
-support_z_distance=0
-raft_surface_layers=2
-minimum_bottom_area=1.0
-build_volume_temperature=28
-material_bed_temperature=60
-cool_lift_head=False
-brim_smart_ordering=True
-wipe_retraction_extra_prime_amount=0
-acceleration_skirt_brim=1000
-machine_buildplate_type=glass
-top_skin_preshrink=0.8
-hole_xy_offset=0
-infill=0
-wipe_hop_enable=True
-skin_material_flow_layer_0=95
-bridge_fan_speed=100
-raft_surface_acceleration=3500
-raft_interface_thickness=0.2
-prime_tower_base_size=3
-material_guid=0e01be8c-e425-4fb1-b4a3-b79f255f1db9
-support_bottom_height=0.2
-support_tree_angle=45
-machine_width=233
-expand_skins_expand_distance=0.8
-machine_depth=215
-support_mesh=False
-meshfix_extensive_stitching=False
-mold_angle=40
-infill_line_width=0.4
-support_material_flow=100
-interlocking_depth=2
-ooze_shield_enabled=False
-wall_distribution_count=1
-prime_tower_base_height=0.1
-xy_offset=-0.010000000000000002
-support_bottom_line_distance=0.4
-material_shrinkage_percentage_xy=100.0
-material_bed_temp_wait=True
-support_initial_layer_line_distance=0.5
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_speed_support=50
-jerk_support=20
-optimize_wall_printing_order=True
-bridge_enable_more_layers=False
-infill_randomize_start_location=False
-skin_overlap=10
-retraction_extrusion_window=1
-support_type=everywhere
-support_roof_height=0.2
-wall_x_extruder_nr=-1
-retraction_hop_after_extruder_switch_height=2
-material_name=empty
-support_tree_limit_branch_reach=True
-z_seam_type=sharpest_corner
-wall_line_width_x=0.4
-cooling=0
-machine_endstop_positive_direction_x=False
-adhesion_extruder_nr=-1
-interlocking_boundary_avoidance=2
-meshfix_fluid_motion_enabled=True
-jerk_enabled=True
-experimental=0
-retraction_hop=2
-small_hole_max_size=0
-retraction_hop_after_extruder_switch=True
-skirt_gap=3
-switch_extruder_retraction_amount=16
-adaptive_layer_height_variation=0.1
-travel_avoid_other_parts=True
-machine_show_variants=False
-top_layers=10
-adhesion_type=brim
-infill_wall_line_count=0
-jerk_topbottom=20
-material_anti_ooze_retracted_position=-4
-jerk_wall_0_roofing=20
-skirt_brim_minimal_length=250
-machine_settings=0
-support_tree_angle_slow=30.0
-conical_overhang_enabled=False
-raft_margin=15
-machine_extruders_share_heater=False
-material_print_temp_prepend=True
-material_id=empty_material
-machine_gcode_flavor=Griffin
-flow_rate_max_extrusion_offset=0
-support_bottom_stair_step_height=0
-support_line_width=0.4
-acceleration_infill=3500
-machine_nozzle_tip_outer_diameter=1.0
-material_surface_energy=100
-smooth_spiralized_contours=True
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_spin_down_time=0.5
-support_xy_overrides_z=z_overrides_xy
-wipe_retraction_enable=True
-jerk_ironing=20
-wipe_retraction_prime_speed=25
-speed_prime_tower=30
-support_structure=normal
-remove_empty_first_layers=True
-machine_heat_zone_length=16
-travel_retract_before_outer_wall=False
-wall_transition_filter_deviation=0.1
-default_material_print_temperature=200
-bridge_skin_support_threshold=50
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_spin_time=0.5
-skin_angles=[]
-wall_transition_filter_distance=100
-skirt_brim_speed=10.0
-minimum_interface_area=1.0
-brim_replaces_support=True
-wall_line_count=2
-wipe_hop_amount=2
-prime_tower_size=20
-gradual_support_infill_step_height=0.4
-support_infill_sparse_thickness=0.2
-interlocking_enable=False
-machine_max_feedrate_x=300
-top_bottom_pattern=lines
-wall_material_flow=100
-ironing_only_highest_layer=False
-material_flow=100
-material_flush_purge_speed=0.5
-acceleration_ironing=1000
-hole_xy_offset_max_diameter=0
-ironing_monotonic=False
-raft_interface_layers=1
-roofing_angles=[]
-brim_inside_margin=2.5
-acceleration_print_layer_0=1000
-raft_interface_fan_speed=50.0
-support_tree_branch_reach_limit=30
-support_conical_min_width=5.0
-gradual_support_infill_steps=2
-meshfix=0
-support_interface_enable=True
-minimum_support_area=0.0
-material_anti_ooze_retraction_speed=50
-magic_fuzzy_skin_point_dist=0.8
-prime_tower_raft_base_line_spacing=1.6
-_plugin__curaenginegradualflow__0_1_0__reset_flow_duration=2.0
-wall_transition_angle=10
-top_skin_expand_distance=0.8
-jerk_prime_tower=20
-machine_extruder_count=2
-nozzle_disallowed_areas=[]
-material_break_preparation_temperature=210
-machine_always_write_active_tool=False
-time=13:56:09
-material_type=empty
-print_temperature=200
-date=08-12-2023
-initial_extruder_nr=0
-nozzle_offsetting_for_disallowed_areas=True
diff --git a/stress_benchmark/resources/068.wkt b/stress_benchmark/resources/068.wkt
deleted file mode 100644
index e54c3c5036..0000000000
--- a/stress_benchmark/resources/068.wkt
+++ /dev/null
@@ -1 +0,0 @@
-MULTIPOLYGON (((116557 108997, 116571 109003, 116623 108979, 116612 109036, 116622 109048, 116681 109050, 116647 109098, 116650 109113, 116701 109140, 116651 109165, 116647 109180, 116682 109228, 116623 109230, 116613 109242, 116624 109299, 116571 109275, 116557 109281, 116542 109339, 116505 109295, 116489 109295, 116453 109339, 116437 109282, 116423 109276, 116369 109299, 116380 109243, 116370 109231, 116311 109229, 116347 109181, 116343 109166, 116291 109140, 116344 109113, 116347 109098, 116311 109050, 116370 109048, 116380 109036, 116369 108980, 116423 109003, 116437 108997, 116452 108940, 116489 108984, 116505 108984, 116541 108940)))15662 115271, 115650 115271, 114975 115775, 114576 115027, 114565 115022, 113569 115192, 113073 114302, 113062 114297, 112221 114451, 112189 113629, 112182 113619, 111222 113332, 111152 112331, 111145 112322, 110329 112100, 110673 111319, 110671 111308, 109924 110623, 110310 109694, 110307 109682, 109664 109147, 110306 108588, 110308 108576, 109921 107630, 110668 106945, 110670 106934, 110324 106151, 111138 105927, 111145 105918, 111214 104918, 112175 104630, 112182 104620, 112211 103797, 113051 103949, 113062 103944, 113559 103054, 114556 103223, 114567 103218, 114963 102469, 115638 102970, 115650 102970, 116492 102383)))
\ No newline at end of file
diff --git a/stress_benchmark/resources/069.settings b/stress_benchmark/resources/069.settings
deleted file mode 100644
index f44800ff2a..0000000000
--- a/stress_benchmark/resources/069.settings
+++ /dev/null
@@ -1,280 +0,0 @@
-support_interface_line_width=0.4
-machine_max_acceleration_y=9000
-gradual_infill_steps=0
-machine_height=205
-material_break_preparation_retracted_position=-16
-wall_0_wipe_dist=0.2
-speed_ironing=13.333333333333334
-prime_tower_brim_enable=True
-travel_speed=120
-bridge_skin_density_3=100
-draft_shield_dist=10
-infill_support_enabled=False
-material_flush_purge_length=60
-jerk_travel_enabled=False
-raft_interface_line_width=0.6000000000000001
-group_outer_walls=True
-wall_transition_length=0.4
-acceleration_travel=5000
-wall_overhang_speed_factor=100
-machine_nozzle_temp_enabled=False
-material_break_speed=25
-wipe_retraction_retract_speed=25
-extruder_prime_pos_z=0
-retraction_prime_speed=25
-print_sequence=all_at_once
-flow_rate_extrusion_offset_factor=100
-prime_tower_enable=False
-_plugin__curaenginetiledinfill__0_2_0__tile_size=500
-support_roof_line_distance=0.4
-machine_nozzle_head_distance=5
-support_bottom_distance=0.1
-brim_width=8.0
-speed_support_interface=20.0
-small_feature_speed_factor=50
-cutting_mesh=False
-material_adhesion_tendency=0
-small_feature_max_length=0.0
-material_no_load_move_factor=0.91
-mesh_position_x=0
-zig_zaggify_support=True
-inset_direction=outside_in
-wall_extruder_nr=-1
-jerk_wall=20
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_speed_wall=100
-meshfix_union_all_remove_holes=False
-meshfix_maximum_deviation=10.0
-material_is_support_material=False
-speed_equalize_flow_width_factor=110.0
-lightning_infill_overhang_angle=40
-wall_0_extruder_nr=-1
-top_bottom_thickness=0.8
-support_tree_top_rate=10
-machine_extruders_share_nozzle=False
-machine_steps_per_mm_z=50
-quality_name=Fine
-speed_print=50
-prime_tower_line_width=0.4
-roofing_monotonic=True
-wall_x_material_flow_roofing=100
-skirt_height=3
-machine_feeder_wheel_diameter=10.0
-jerk_print_layer_0=20
-infill_extruder_nr=-1
-bridge_sparse_infill_max_density=0
-jerk_layer_0=20
-meshfix_maximum_extrusion_area_deviation=50000
-material_bed_temp_prepend=True
-acceleration_wall_x_roofing=3000
-roofing_extruder_nr=-1
-speed_travel_layer_0=120
-support_bottom_enable=False
-support_extruder_nr_layer_0=0
-support_tower_roof_angle=65
-support_supported_skin_fan_speed=100
-infill_sparse_thickness=0.1
-support_tower_maximum_supported_diameter=3.0
-machine_endstop_positive_direction_y=False
-wall_overhang_angle=90
-machine_minimum_feedrate=0.0
-line_width=0.4
-top_bottom_extruder_nr=-1
-ironing_inset=0.38
-machine_acceleration=3000
-z_seam_x=111.5
-draft_shield_height_limitation=full
-speed_wall_0_roofing=30.0
-raft_surface_jerk=20
-switch_extruder_retraction_speed=20
-skirt_brim_material_flow=100
-infill_mesh_order=0
-acceleration_prime_tower=3000
-infill_multiplier=1
-raft_surface_thickness=0.1
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_speed_support_interface=100
-jerk_support_bottom=20
-jerk_support_interface=20
-raft_interface_extruder_nr=0
-_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled=False
-bridge_wall_coast=0
-z_seam_corner=z_seam_corner_none
-machine_max_feedrate_z=40
-speed_topbottom=20
-small_skin_on_surface=False
-machine_firmware_retract=True
-center_object=False
-wipe_retraction_speed=25
-support_tree_max_diameter=25
-bridge_skin_density_2=100
-support_bottom_line_width=0.4
-ooze_shield_angle=60
-initial_layer_line_width_factor=100.0
-layer_height_0=0.27
-retraction_count_max=25
-retraction_combing_max_distance=15
-z_seam_relative=False
-skin_outline_count=1
-support_interface_wall_count=1
-infill_sparse_density=0
-infill_overlap=10
-bridge_skin_speed_3=20
-mold_width=5
-material_final_print_temperature=185
-support_tree_rest_preference=graceful
-raft_acceleration=3000
-skin_preshrink=0.8
-infill_offset_y=0
-support_interface_pattern=zigzag
-infill_before_walls=True
-machine_steps_per_mm_e=1600
-sub_div_rad_add=0.4
-magic_spiralize=False
-fill_outline_gaps=True
-infill_pattern=grid
-support_skip_zag_per_mm=20
-support_roof_extruder_nr=0
-ironing_enabled=False
-interlocking_orientation=22.5
-initial_bottom_layers=8
-machine_center_is_zero=False
-skirt_brim_extruder_nr=-1
-raft_base_extruder_nr=0
-connect_skin_polygons=False
-magic_fuzzy_skin_point_density=1.25
-speed_support_roof=20.0
-speed_wall_x_roofing=40.0
-acceleration_travel_layer_0=5000.0
-coasting_min_volume=0.8
-material_print_temperature_layer_0=200
-brim_outside_only=True
-slicing_tolerance=middle
-adaptive_layer_height_threshold=0.2
-machine_nozzle_size=0.4
-raft_base_jerk=20
-wall_line_width_0=0.4
-acceleration_support_roof=3000
-skin_line_width=0.4
-raft_base_fan_speed=0
-machine_heated_bed=True
-machine_max_feedrate_e=45
-meshfix_fluid_motion_shift_distance=0.1
-conical_overhang_hole_size=0
-jerk_travel=20
-retraction_combing=no_outer_surfaces
-material_shrinkage_percentage=100.0
-infill_line_distance=0
-bridge_settings_enabled=True
-ironing_flow=10.0
-material_initial_print_temperature=190
-machine_max_jerk_xy=20.0
-bottom_skin_preshrink=0.8
-wipe_repeat_count=5
-support_roof_line_width=0.4
-support_bottom_density=100
-infill_offset_x=0
-roofing_pattern=lines
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_spin_up_time=0.5
-support_extruder_nr=0
-conical_overhang_angle=50
-speed_print_layer_0=30
-cool_fan_speed_0=0
-support_tree_branch_diameter_angle=7
-support_bottom_offset=0.8
-raft_interface_line_spacing=0.8
-meshfix_union_all=True
-support_line_distance=2.6666666666666665
-min_bead_width=0.34
-wipe_hop_speed=10
-wall_x_material_flow_layer_0=95.0
-support_enable=False
-raft_base_speed=15
-speed_travel=120
-blackmagic=0
-bridge_skin_material_flow=95.0
-acceleration_wall_0_roofing=3000
-machine_max_jerk_e=5.0
-mesh_position_y=0
-gantry_height=52
-alternate_carve_order=True
-adaptive_layer_height_variation_step=0.01
-support_xy_distance_overhang=0.2
-cool_min_layer_time=5
-material_extrusion_cool_down_speed=0.7
-bottom_layers=8
-support_tower_diameter=3.0
-day=Fri
-support_mesh_drop_down=True
-raft_base_acceleration=3000
-raft_surface_line_spacing=0.4
-raft_interface_acceleration=3000
-speed_support_infill=30.0
-mesh_position_z=0
-wipe_move_distance=20
-layer_0_z_overlap=0.15
-jerk_roofing=20
-minimum_roof_area=1.0
-extruder_prime_pos_abs=False
-quality_changes_name=empty
-prime_tower_wipe_enabled=True
-speed_wall_x=40.0
-support_offset=0.8
-speed_roofing=20
-support_pattern=zigzag
-skin_edge_support_thickness=0.4
-raft_jerk=20
-support_xy_distance=0.7
-support_brim_width=1.2000000000000002
-support_bottom_stair_step_width=5.0
-material_crystallinity=False
-retraction_hop_only_when_collides=False
-dual=0
-bottom_skin_expand_distance=0.8
-skin_overlap_mm=0.08
-raft_surface_speed=20
-cool_min_layer_time_fan_speed_max=10
-prime_blob_enable=False
-support_roof_density=100
-speed=0
-brim_gap=0
-zig_zaggify_infill=False
-support_bottom_wall_count=1
-meshfix_fluid_motion_angle=15
-switch_extruder_prime_speed=20
-_plugin__curaenginegradualflow__0_1_0__max_flow_acceleration=1
-small_skin_width=0.8
-_plugin__curaenginefanspeedbyfeaturetype__0_1_0__cool_fan_speed_wall_x=100
-jerk_wall_x=20
-coasting_volume=0.064
-min_odd_wall_line_width=0.34
-cool_fan_speed=100
-skin_material_flow=95.0
-speed_wall=40.0
-xy_offset_layer_0=-0.09
-cool_min_temperature=190
-magic_fuzzy_skin_outside_only=False
-roofing_material_flow=100
-travel_avoid_supports=False
-support_zag_skip_count=8
-infill_mesh=False
-support_join_distance=2.0
-retraction_amount=6.5
-support_interface_density=100
-machine_max_acceleration_z=100
-acceleration_support_bottom=3000
-cool_fan_speed_min=100
-machine_use_extruder_offset_to_offset_coords=True
-acceleration_wall_x=3000
-speed_layer_0=30
-top_thickness=0.8
-raft_smoothing=5
-machine_max_acceleration_x=9000
-machine_max_jerk_z=0.4
-raft_base_line_spacing=1.6
-support_roof_enable=False
-acceleration_enabled=False
-speed_slowdown_layers=2
-acceleration_roofing=3000
-top_bottom_pattern_0=lines
-machine_min_cool_heat_time_window=50.0
-machine_extruders_shared_nozzle_initial_retraction=0
-support_fan_enable=False
diff --git a/stress_benchmark/resources/069.wkt b/stress_benchmark/resources/069.wkt
deleted file mode 100644
index 1480fbd502..0000000000
--- a/stress_benchmark/resources/069.wkt
+++ /dev/null
@@ -1 +0,0 @@
-MULTIPOLYGON (((112630 86900, 113828 86992, 114805 87104, 115775 87255, 116739 87445, 117693 87673, 118639 87940, 119573 88242, 120711 88662, 122084 89266, 123167 89821, 124238 90425, 125477 91226, 126463 91950, 127232 92562, 127231 92563, 127973 93205, 128871 94047, 129713 94936, 130359 95676, 130975 96441, 131561 97231, 132114 98041, 132634 98874, 133120 99726, 133573 100598, 133990 101487, 134464 102611, 134465 102611, 134876 103776, 135166 104714, 135482 105909, 135481 105909, 135723 107104, 135879 108074, 135996 109049, 136074 110029, 136113 111009, 136113 111993, 136074 112972, 135996 113953, 135879 114927, 135723 115897, 135481 117092, 135165 118287, 134875 119225, 134462 120396, 134463 120396, 133989 121515, 133464 122634, 132744 123950, 132112 124961, 131560 125772, 130974 126560, 130358 127326, 129712 128065, 128872 128952, 127973 129796, 127231 130438, 126461 131050, 125671 131632, 124855 132180, 124021 132698, 123166 133180, 122293 133627, 121401 134040, 120494 134418, 119573 134759, 119573 134758, 118639 135060, 117693 135327, 116738 135555, 115774 135745, 114563 135934, 113338 136050, 112358 136104, 111375 136119, 110395 136094, 109414 136031, 108438 135928, 107466 135787, 106500 135606, 105542 135387, 104595 135131, 103657 134837, 102733 134505, 101822 134136, 100928 133735, 100049 133295, 99190 132821, 98348 132312, 97528 131770, 96732 131198, 95744 130425, 94663 129471, 93790 128602, 93121 127881, 92327 126954, 91582 125971, 91021 125164, 90491 124337, 89874 123278, 89207 121961, 88719 120837, 88365 119920, 88047 118991, 88048 118991, 87768 118050, 87525 117097, 87268 115888, 87050 114430, 86940 113218, 86892 112237, 86880 111016, 86940 109782, 87029 108803, 87156 107830, 87321 106862, 87525 105902, 87768 104949, 88048 104007, 88047 104007, 88365 103078, 88719 102162, 89218 101013, 89219 101013, 89875 99720, 90492 98662, 90491 98662, 91021 97835, 91582 97028, 92330 96041, 92331 96042, 93122 95119, 93791 94398, 94655 93537, 94654 93537, 95581 92719, 96532 91945, 97530 91228, 98350 90686, 99191 90178, 100049 89705, 100928 89265, 101824 88862, 102735 88493, 103658 88162, 104596 87868, 105542 87612, 105542 87613, 106501 87394, 107467 87213, 108439 87072, 109415 86969, 110396 86906, 111378 86881)))
\ No newline at end of file