diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 2b37b3d7acf..a49d613ce1b 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6159,66 +6159,53 @@ "settable_per_extruder": true, "limit_to_extruder": "raft_surface_extruder_nr" }, - "raft_surface_layers": - { - "label": "Raft Top Layers", - "description": "The number of top layers on top of the 2nd raft layer. These are fully filled layers that the model sits on. 2 layers result in a smoother top surface than 1.", - "type": "int", - "default_value": 2, - "minimum_value": "0", - "maximum_value_warning": "20", - "enabled": "resolveOrValue('adhesion_type') == 'raft'", - "settable_per_mesh": false, - "settable_per_extruder": true, - "limit_to_extruder": "raft_surface_extruder_nr" - }, - "raft_surface_thickness": + "raft_base_thickness": { - "label": "Raft Top Layer Thickness", - "description": "Layer thickness of the top raft layers.", + "label": "Raft Base Thickness", + "description": "Layer thickness of the base raft layer. This should be a thick layer which sticks firmly to the printer build plate.", "unit": "mm", "type": "float", - "default_value": 0.1, - "value": "resolveOrValue('layer_height')", + "default_value": 0.3, + "value": "resolveOrValue('layer_height_0') * 1.2", "minimum_value": "0.001", "minimum_value_warning": "0.04", - "maximum_value_warning": "0.75 * machine_nozzle_size", - "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0", + "maximum_value_warning": "0.75 * raft_base_line_width", + "enabled": "resolveOrValue('adhesion_type') == 'raft'", "settable_per_mesh": false, "settable_per_extruder": true, - "limit_to_extruder": "raft_surface_extruder_nr" + "limit_to_extruder": "raft_base_extruder_nr" }, - "raft_surface_line_width": + "raft_base_line_width": { - "label": "Raft Top Line Width", - "description": "Width of the lines in the top surface of the raft. These can be thin lines so that the top of the raft becomes smooth.", + "label": "Raft Base Line Width", + "description": "Width of the lines in the base raft layer. These should be thick lines to assist in build plate adhesion.", "unit": "mm", "type": "float", - "default_value": 0.4, - "value": "line_width", + "default_value": 0.8, "minimum_value": "0.001", - "minimum_value_warning": "machine_nozzle_size * 0.1", - "maximum_value_warning": "machine_nozzle_size * 2", - "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0", + "value": "machine_nozzle_size * 2", + "minimum_value_warning": "machine_nozzle_size * 0.5", + "maximum_value_warning": "machine_nozzle_size * 3", + "enabled": "resolveOrValue('adhesion_type') == 'raft'", "settable_per_mesh": false, "settable_per_extruder": true, - "limit_to_extruder": "raft_surface_extruder_nr" + "limit_to_extruder": "raft_base_extruder_nr" }, - "raft_surface_line_spacing": + "raft_base_line_spacing": { - "label": "Raft Top Spacing", - "description": "The distance between the raft lines for the top raft layers. The spacing should be equal to the line width, so that the surface is solid.", + "label": "Raft Base Line Spacing", + "description": "The distance between the raft lines for the base raft layer. Wide spacing makes for easy removal of the raft from the build plate.", "unit": "mm", "type": "float", - "default_value": 0.4, + "default_value": 1.6, + "value": "raft_base_line_width * 2", "minimum_value": "0", - "minimum_value_warning": "raft_surface_line_width", - "maximum_value_warning": "raft_surface_line_width * 3", - "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0", - "value": "raft_surface_line_width", + "minimum_value_warning": "raft_base_line_width", + "maximum_value_warning": "100", + "enabled": "resolveOrValue('adhesion_type') == 'raft'", "settable_per_mesh": false, "settable_per_extruder": true, - "limit_to_extruder": "raft_surface_extruder_nr" + "limit_to_extruder": "raft_base_extruder_nr" }, "raft_interface_layers": { @@ -6281,53 +6268,114 @@ "settable_per_extruder": true, "limit_to_extruder": "raft_interface_extruder_nr" }, - "raft_base_thickness": + "raft_surface_layers": { - "label": "Raft Base Thickness", - "description": "Layer thickness of the base raft layer. This should be a thick layer which sticks firmly to the printer build plate.", + "label": "Raft Top Layers", + "description": "The number of top layers on top of the 2nd raft layer. These are fully filled layers that the model sits on. 2 layers result in a smoother top surface than 1.", + "type": "int", + "default_value": 2, + "minimum_value": "0", + "maximum_value_warning": "20", + "enabled": "resolveOrValue('adhesion_type') == 'raft'", + "settable_per_mesh": false, + "settable_per_extruder": true, + "limit_to_extruder": "raft_surface_extruder_nr" + }, + "raft_surface_thickness": + { + "label": "Raft Top Layer Thickness", + "description": "Layer thickness of the top raft layers.", "unit": "mm", "type": "float", - "default_value": 0.3, - "value": "resolveOrValue('layer_height_0') * 1.2", + "default_value": 0.1, + "value": "resolveOrValue('layer_height')", "minimum_value": "0.001", "minimum_value_warning": "0.04", - "maximum_value_warning": "0.75 * raft_base_line_width", - "enabled": "resolveOrValue('adhesion_type') == 'raft'", + "maximum_value_warning": "0.75 * machine_nozzle_size", + "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0", "settable_per_mesh": false, "settable_per_extruder": true, - "limit_to_extruder": "raft_base_extruder_nr" + "limit_to_extruder": "raft_surface_extruder_nr" }, - "raft_base_line_width": + "raft_surface_line_width": { - "label": "Raft Base Line Width", - "description": "Width of the lines in the base raft layer. These should be thick lines to assist in build plate adhesion.", + "label": "Raft Top Line Width", + "description": "Width of the lines in the top surface of the raft. These can be thin lines so that the top of the raft becomes smooth.", "unit": "mm", "type": "float", - "default_value": 0.8, + "default_value": 0.4, + "value": "line_width", "minimum_value": "0.001", - "value": "machine_nozzle_size * 2", - "minimum_value_warning": "machine_nozzle_size * 0.5", - "maximum_value_warning": "machine_nozzle_size * 3", - "enabled": "resolveOrValue('adhesion_type') == 'raft'", + "minimum_value_warning": "machine_nozzle_size * 0.1", + "maximum_value_warning": "machine_nozzle_size * 2", + "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0", "settable_per_mesh": false, "settable_per_extruder": true, - "limit_to_extruder": "raft_base_extruder_nr" + "limit_to_extruder": "raft_surface_extruder_nr" }, - "raft_base_line_spacing": + "raft_surface_line_spacing": { - "label": "Raft Base Line Spacing", - "description": "The distance between the raft lines for the base raft layer. Wide spacing makes for easy removal of the raft from the build plate.", + "label": "Raft Top Spacing", + "description": "The distance between the raft lines for the top raft layers. The spacing should be equal to the line width, so that the surface is solid.", "unit": "mm", "type": "float", - "default_value": 1.6, - "value": "raft_base_line_width * 2", + "default_value": 0.4, "minimum_value": "0", - "minimum_value_warning": "raft_base_line_width", - "maximum_value_warning": "100", - "enabled": "resolveOrValue('adhesion_type') == 'raft'", + "minimum_value_warning": "raft_surface_line_width", + "maximum_value_warning": "raft_surface_line_width * 3", + "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0", + "value": "raft_surface_line_width", "settable_per_mesh": false, "settable_per_extruder": true, - "limit_to_extruder": "raft_base_extruder_nr" + "limit_to_extruder": "raft_surface_extruder_nr" + }, + "raft_wall_count": + { + "label": "Raft Wall Count", + "description": "The number of contours to print around the linear pattern of the raft.", + "type": "int", + "default_value": 1, + "minimum_value": "0", + "enabled": "resolveOrValue('adhesion_type') == 'raft'", + "settable_per_mesh": false, + "settable_per_extruder": false, + "children": + { + "raft_base_wall_count": + { + "label": "Raft Base Wall Count", + "description": "The number of contours to print around the linear pattern in the base layer of the raft.", + "type": "int", + "default_value": 1, + "value": "raft_wall_count", + "minimum_value": "0", + "enabled": "resolveOrValue('adhesion_type') == 'raft'", + "settable_per_mesh": false, + "settable_per_extruder": false + }, + "raft_interface_wall_count": + { + "label": "Raft Middle Wall Count", + "description": "The number of contours to print around the linear pattern in the middle layers of the raft.", + "type": "int", + "default_value": 0, + "minimum_value": "0", + "enabled": "resolveOrValue('adhesion_type') == 'raft'", + "settable_per_mesh": false, + "settable_per_extruder": false + }, + "raft_surface_wall_count": + { + "label": "Raft Top Wall Count", + "description": "The number of contours to print around the linear pattern in the top layers of the raft.", + "type": "int", + "default_value": 0, + "minimum_value": "0", + "enabled": "resolveOrValue('adhesion_type') == 'raft'", + "settable_per_mesh": false, + "settable_per_extruder": false + } + } }, "raft_speed": { @@ -6346,21 +6394,21 @@ "limit_to_extruder": "adhesion_extruder_nr", "children": { - "raft_surface_speed": + "raft_base_speed": { - "label": "Raft Top Print Speed", - "description": "The speed at which the top raft layers are printed. These should be printed a bit slower, so that the nozzle can slowly smooth out adjacent surface lines.", + "label": "Raft Base Print Speed", + "description": "The speed at which the base raft layer is printed. This should be printed quite slowly, as the volume of material coming out of the nozzle is quite high.", "unit": "mm/s", "type": "float", - "default_value": 20, + "default_value": 15, "minimum_value": "0.1", "maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2)", - "maximum_value_warning": "100", - "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0", - "value": "raft_speed", + "maximum_value_warning": "200", + "enabled": "resolveOrValue('adhesion_type') == 'raft'", + "value": "0.75 * raft_speed", "settable_per_mesh": false, "settable_per_extruder": true, - "limit_to_extruder": "raft_surface_extruder_nr" + "limit_to_extruder": "raft_base_extruder_nr" }, "raft_interface_speed": { @@ -6378,21 +6426,21 @@ "settable_per_extruder": true, "limit_to_extruder": "raft_interface_extruder_nr" }, - "raft_base_speed": + "raft_surface_speed": { - "label": "Raft Base Print Speed", - "description": "The speed at which the base raft layer is printed. This should be printed quite slowly, as the volume of material coming out of the nozzle is quite high.", + "label": "Raft Top Print Speed", + "description": "The speed at which the top raft layers are printed. These should be printed a bit slower, so that the nozzle can slowly smooth out adjacent surface lines.", "unit": "mm/s", "type": "float", - "default_value": 15, + "default_value": 20, "minimum_value": "0.1", "maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2)", - "maximum_value_warning": "200", - "enabled": "resolveOrValue('adhesion_type') == 'raft'", - "value": "0.75 * raft_speed", + "maximum_value_warning": "100", + "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0", + "value": "raft_speed", "settable_per_mesh": false, "settable_per_extruder": true, - "limit_to_extruder": "raft_base_extruder_nr" + "limit_to_extruder": "raft_surface_extruder_nr" } } }, @@ -6412,10 +6460,10 @@ "limit_to_extruder": "adhesion_extruder_nr", "children": { - "raft_surface_acceleration": + "raft_base_acceleration": { - "label": "Raft Top Print Acceleration", - "description": "The acceleration with which the top raft layers are printed.", + "label": "Raft Base Print Acceleration", + "description": "The acceleration with which the base raft layer is printed.", "unit": "mm/s\u00b2", "type": "float", "default_value": 3000, @@ -6423,9 +6471,9 @@ "minimum_value": "0.1", "minimum_value_warning": "100", "maximum_value_warning": "10000", - "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('acceleration_enabled') and raft_surface_layers > 0", + "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('acceleration_enabled')", "settable_per_mesh": false, - "limit_to_extruder": "raft_surface_extruder_nr" + "limit_to_extruder": "raft_base_extruder_nr" }, "raft_interface_acceleration": { @@ -6442,10 +6490,10 @@ "settable_per_mesh": false, "limit_to_extruder": "raft_interface_extruder_nr" }, - "raft_base_acceleration": + "raft_surface_acceleration": { - "label": "Raft Base Print Acceleration", - "description": "The acceleration with which the base raft layer is printed.", + "label": "Raft Top Print Acceleration", + "description": "The acceleration with which the top raft layers are printed.", "unit": "mm/s\u00b2", "type": "float", "default_value": 3000, @@ -6453,9 +6501,9 @@ "minimum_value": "0.1", "minimum_value_warning": "100", "maximum_value_warning": "10000", - "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('acceleration_enabled')", + "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('acceleration_enabled') and raft_surface_layers > 0", "settable_per_mesh": false, - "limit_to_extruder": "raft_base_extruder_nr" + "limit_to_extruder": "raft_surface_extruder_nr" } } }, @@ -6475,20 +6523,20 @@ "limit_to_extruder": "adhesion_extruder_nr", "children": { - "raft_surface_jerk": + "raft_base_jerk": { - "label": "Raft Top Print Jerk", - "description": "The jerk with which the top raft layers are printed.", + "label": "Raft Base Print Jerk", + "description": "The jerk with which the base raft layer is printed.", "unit": "mm/s", "type": "float", "default_value": 20, "value": "raft_jerk", "minimum_value": "0", "minimum_value_warning": "5", - "maximum_value_warning": "100", - "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('jerk_enabled') and raft_surface_layers > 0", + "maximum_value_warning": "50", + "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('jerk_enabled')", "settable_per_mesh": false, - "limit_to_extruder": "raft_surface_extruder_nr" + "limit_to_extruder": "raft_base_extruder_nr" }, "raft_interface_jerk": { @@ -6505,20 +6553,20 @@ "settable_per_mesh": false, "limit_to_extruder": "raft_interface_extruder_nr" }, - "raft_base_jerk": + "raft_surface_jerk": { - "label": "Raft Base Print Jerk", - "description": "The jerk with which the base raft layer is printed.", + "label": "Raft Top Print Jerk", + "description": "The jerk with which the top raft layers are printed.", "unit": "mm/s", "type": "float", "default_value": 20, "value": "raft_jerk", "minimum_value": "0", "minimum_value_warning": "5", - "maximum_value_warning": "50", - "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('jerk_enabled')", + "maximum_value_warning": "100", + "enabled": "resolveOrValue('adhesion_type') == 'raft' and resolveOrValue('jerk_enabled') and raft_surface_layers > 0", "settable_per_mesh": false, - "limit_to_extruder": "raft_base_extruder_nr" + "limit_to_extruder": "raft_surface_extruder_nr" } } }, @@ -6537,20 +6585,20 @@ "limit_to_extruder": "adhesion_extruder_nr", "children": { - "raft_surface_fan_speed": + "raft_base_fan_speed": { - "label": "Raft Top Fan Speed", - "description": "The fan speed for the top raft layers.", + "label": "Raft Base Fan Speed", + "description": "The fan speed for the base raft layer.", "unit": "%", "type": "float", "minimum_value": "0", "maximum_value": "100", "default_value": 0, "value": "raft_fan_speed", - "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0", + "enabled": "resolveOrValue('adhesion_type') == 'raft'", "settable_per_mesh": false, "settable_per_extruder": true, - "limit_to_extruder": "raft_surface_extruder_nr" + "limit_to_extruder": "raft_base_extruder_nr" }, "raft_interface_fan_speed": { @@ -6567,20 +6615,20 @@ "settable_per_extruder": true, "limit_to_extruder": "raft_interface_extruder_nr" }, - "raft_base_fan_speed": + "raft_surface_fan_speed": { - "label": "Raft Base Fan Speed", - "description": "The fan speed for the base raft layer.", + "label": "Raft Top Fan Speed", + "description": "The fan speed for the top raft layers.", "unit": "%", "type": "float", "minimum_value": "0", "maximum_value": "100", "default_value": 0, "value": "raft_fan_speed", - "enabled": "resolveOrValue('adhesion_type') == 'raft'", + "enabled": "resolveOrValue('adhesion_type') == 'raft' and raft_surface_layers > 0", "settable_per_mesh": false, "settable_per_extruder": true, - "limit_to_extruder": "raft_base_extruder_nr" + "limit_to_extruder": "raft_surface_extruder_nr" } } } @@ -8286,17 +8334,6 @@ "settable_per_mesh": false, "settable_per_extruder": false }, - "raft_base_wall_count": - { - "label": "Raft Base Wall Count", - "description": "The number of contours to print around the linear pattern in the base layer of the raft.", - "type": "int", - "default_value": 1, - "enabled": "resolveOrValue('adhesion_type') == 'raft'", - "resolve": "max(extruderValues('raft_base_wall_count'))", - "settable_per_mesh": false, - "settable_per_extruder": false - }, "group_outer_walls": { "label": "Group Outer Walls", diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg index 2f2dd7671d0..384f8d25287 100644 --- a/resources/setting_visibility/expert.cfg +++ b/resources/setting_visibility/expert.cfg @@ -344,6 +344,7 @@ raft_interface_line_spacing raft_base_thickness raft_base_line_width raft_base_line_spacing +raft_wall_count raft_speed raft_acceleration raft_jerk