diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..a3533c805d1
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm_quick.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..638560ae82a
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm_quick.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..b6175f198a2
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg
new file mode 100644
index 00000000000..3058369081a
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = superdraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..6dc6a308567
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg
new file mode 100644
index 00000000000..13f9d21fac7
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = superdraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..b4b346a730d
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg
new file mode 100644
index 00000000000..b98d27da01e
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = superdraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..1ffe95220bf
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg
new file mode 100644
index 00000000000..11c28e9be1e
--- /dev/null
+++ b/resources/intent/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s3
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = superdraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..eab329b62b8
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm_quick.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..f7a0557a60f
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm_quick.inst.cfg
@@ -0,0 +1,27 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.4
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_print = 150
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =2 * line_width
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..4c1898658bb
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg
new file mode 100644
index 00000000000..f69ca749155
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_abs
+quality_type = superdraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..623ae45d75c
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg
new file mode 100644
index 00000000000..994f21610e0
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_petg
+quality_type = superdraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..3d04b22ffab
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg
new file mode 100644
index 00000000000..8976d8902c9
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_pla
+quality_type = superdraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg
new file mode 100644
index 00000000000..912a50d05ce
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = verydraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+
diff --git a/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg
new file mode 100644
index 00000000000..c6e45c7f896
--- /dev/null
+++ b/resources/intent/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm_quick.inst.cfg
@@ -0,0 +1,26 @@
+[general]
+definition = ultimaker_s5
+name = Quick
+version = 4
+
+[metadata]
+intent_category = quick
+material = ultimaker_tough_pla
+quality_type = superdraft
+setting_version = 22
+type = intent
+variant = AA 0.8
+
+[values]
+_plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = False
+acceleration_wall_0 = 2000
+gradual_infill_step_height = =4 * layer_height
+gradual_infill_steps = 3
+infill_sparse_density = 40
+jerk_print = 30
+jerk_wall_0 = 30
+speed_wall = =speed_print
+speed_wall_0 = 40
+top_bottom_thickness = =4 * layer_height
+wall_thickness = =wall_line_width_0
+