.travis.yml

matrix:
  include:
    # Build for Ubuntu 16.04 (Makefile) (GCC)
    - name: "Ubuntu 16.04 (Makefile) [GCC]"
      language: cpp
      compiler: gcc
      sudo: required
      services:
        - docker
      install:
        - cd docker/ubuntu-16.04/
        - docker build -t ubuntu .
        - cd ../..
      script:
        - export MAKEFLAGS="-j$((`grep -c ^processor /proc/cpuinfo`*2))"
        # Must supply the TRAVIS environment variables to the docker container so autorevision properly receives the revision info from Travis
        # To do this, append the following to the pertinent lines after —rm:
        # -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG
        - docker run --rm -v $(pwd):/code ubuntu ./autogen.sh
        - docker run --rm -e MAKEFLAGS -v $(pwd):/code ubuntu ./configure
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu make
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu make check
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu sudo make install

    # Build for Ubuntu 16.04 (CMake) (GCC)
    - name: "Ubuntu 16.04 (CMake) [GCC]"
      language: cpp
      compiler: gcc
      sudo: required
      services:
        - docker
      install:
        - cd docker/ubuntu-16.04/
        - docker build -t ubuntu .
        - cd ../..
      script:
        - export MAKEFLAGS="-j$((`grep -c ^processor /proc/cpuinfo`*2))"
        # Must supply the TRAVIS environment variables to the docker container so autorevision properly receives the revision info from Travis
        # To do this, append the following to the pertinent lines after —rm:
        # -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu cmake '-H.' -Bbuild -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWZ_ENABLE_WARNINGS:BOOL=ON -G"Ninja"
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu cmake --build build

    ## NOTE: The following is commented-out until we solidify how we're caching Docker images
    ## (The current ubuntu Dockerfile does not install Clang.)
    ## Build for Ubuntu (CMake) (Clang)
    #- language: cpp
    #  env:
    #    - NAME="Ubuntu (CMake)"
    #  compiler: clang
    #  sudo: required
    #  services:
    #    - docker
    #  install:
    #    - cd docker/ubuntu-16.04/
    #    - docker build -t ubuntu .
    #    - cd ../..
    #  script:
    #    - export MAKEFLAGS="-j$((`grep -c ^processor /proc/cpuinfo`*2))"
    #    # Must supply the TRAVIS environment variables to the docker container so autorevision properly receives the revision info from Travis
    #    # To do this, append the following to the pertinent lines after —rm:
    #    # -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG
    #    - docker run --rm -e "CC=clang" -e "CXX=clang++" -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu cmake '-H.' -Bbuild -DCMAKE_BUILD_TYPE=RelWithDebInfo -G"Ninja"
    #    - docker run --rm -e "CC=clang" -e "CXX=clang++" -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu cmake --build build

    # Build for Ubuntu 18.04 (Makefile) (GCC)
    - name: "Ubuntu 18.04 (Makefile) [GCC]"
      language: cpp
      compiler: gcc
      sudo: required
      services:
        - docker
      install:
        - cd docker/ubuntu-18.04/
        - docker build -t ubuntu .
        - cd ../..
      script:
        - export MAKEFLAGS="-j$((`grep -c ^processor /proc/cpuinfo`*2))"
        # Must supply the TRAVIS environment variables to the docker container so autorevision properly receives the revision info from Travis
        # To do this, append the following to the pertinent lines after —rm:
        # -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG
        - docker run --rm -v $(pwd):/code ubuntu ./autogen.sh
        - docker run --rm -e MAKEFLAGS -v $(pwd):/code ubuntu ./configure
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu make
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu make check
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu sudo make install

    # Build for Ubuntu 18.04 (CMake) (Clang)
    - name: "Ubuntu 18.04 (CMake) [Clang]"
      language: cpp
      compiler: clang
      sudo: required
      services:
        - docker
      install:
        - cd docker/ubuntu-18.04-clang/
        - docker build -t ubuntu .
        - cd ../..
      script:
        - export MAKEFLAGS="-j$((`grep -c ^processor /proc/cpuinfo`*2))"
        # Must supply the TRAVIS environment variables to the docker container so autorevision properly receives the revision info from Travis
        # To do this, append the following to the pertinent lines after —rm:
        # -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu cmake '-H.' -Bbuild -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWZ_ENABLE_WARNINGS:BOOL=ON -G"Ninja"
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu cmake --build build

    # Package source (Ubuntu 18.04, CMake)
    - name: "Package Source (Ubuntu 18.04, CMake) [GCC]"
      language: cpp
      compiler: gcc
      sudo: required
      services:
        - docker
      install:
        - cd docker/ubuntu-18.04/
        - docker build -t ubuntu .
        - cd ../..
      before_script:
        - source build_tools/ci/travis/export_build_output_desc.sh
        # Package the source tarball
        - export MAKEFLAGS="-j$((`grep -c ^processor /proc/cpuinfo`*2))"
        # Must supply the TRAVIS environment variables to the docker container so autorevision properly receives the revision info from Travis
        # To do this, append the following to the pertinent lines after —rm:
        # -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu cmake -P "/code/build_tools/ci/travis/prepare_git_repo.cmake"
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu cmake '-H.' -Bbuild -DCMAKE_BUILD_TYPE=Debug -G"Ninja"
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code ubuntu cmake --build build --target package_source
        # Extract the .tar.xz into a new location
        - mkdir extracted && tar -xf build/warzone2100.tar.xz -C extracted
      script:
        # Attempt a build from the tarball source (using CMake)
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd)/extracted/warzone2100:/code ubuntu cmake '-H.' -Bbuild -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWZ_ENABLE_WARNINGS:BOOL=ON -G"Ninja"
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd)/extracted/warzone2100:/code ubuntu cmake --build build
        # Prepare the source tarball for deployment
        - build_tools/ci/travis/packaged_source_deploy_prepare.sh "build/warzone2100.tar.xz" "${WZ_BUILD_DESC_PREFIX}-" "tmp/wz_upload"
      after_success:
        # Deploy the generated .tar.xz to the buildbot
        - eval "$(ssh-agent -s)" #start the ssh agent
        - export DEPLOY_UPLOAD_PATH="${DEPLOY_UPLOAD_PATH}/${WZ_BUILD_DESC_PREFIX}/src/"
        - build_tools/ci/travis/travis_deploy.sh "tmp/wz_upload" "warzone2100-${WZ_BUILD_DESC_PREFIX}-*_src.tar.xz" --cleanold

    # Build for Fedora :LATEST (CMake) (GCC)
    - name: "Fedora :LATEST (CMake) [GCC]"
      language: cpp
      compiler: gcc
      sudo: required
      services:
        - docker
      install:
        - cd docker/fedora-latest/
        - docker build -t fedora .
        - cd ../..
      script:
        - export MAKEFLAGS="-j$((`grep -c ^processor /proc/cpuinfo`*2))"
        # Must supply the TRAVIS environment variables to the docker container so autorevision properly receives the revision info from Travis
        # To do this, append the following to the pertinent lines after —rm:
        # -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code fedora cmake '-H.' -Bbuild -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWZ_ENABLE_WARNINGS:BOOL=ON -G"Ninja"
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code fedora cmake --build build

    # Build for Fedora :LATEST (CMake) (GCC) (32-bit -m32 cross-compile)
    - name: "Fedora :LATEST (CMake) [GCC -m32]"
      language: cpp
      compiler: gcc
      sudo: required
      services:
        - docker
      install:
        - cd docker/fedora-latest-m32/
        - docker build -t fedora .
        - cd ../..
      script:
        - export MAKEFLAGS="-j$((`grep -c ^processor /proc/cpuinfo`*2))"
        # Must supply the TRAVIS environment variables to the docker container so autorevision properly receives the revision info from Travis
        # To do this, append the following to the pertinent lines after —rm:
        # -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code fedora cmake '-H.' -Bbuild -DCMAKE_TOOLCHAIN_FILE=build_tools/ci/cmake/Toolchain-Linux-cross-m32.cmake -DCMAKE_BUILD_TYPE=RelWithDebInfo -DWZ_ENABLE_WARNINGS:BOOL=ON -G"Ninja"
        - docker run --rm -e CI -e TRAVIS -e "TRAVIS_BUILD_DIR=/code" -e TRAVIS_BRANCH -e TRAVIS_COMMIT -e TRAVIS_PULL_REQUEST_BRANCH -e TRAVIS_TAG -e MAKEFLAGS -v $(pwd):/code fedora cmake --build build

    # Build for macOS (CMake)
    - name: "macOS (CMake) [Xcode 8.3, macOS 10.12 SDK]"
      language: objective-c
      os: osx
      osx_image: xcode8.3
      env:
        - MACOSX_DEPLOYMENT_TARGET=10.10
      before_install:
        - brew update
        - brew upgrade cmake
        - brew install gettext
        - brew install asciidoc
        - brew install docbook-xsl
        # Try to workaround issues with brew downloading gcc
        - brew fetch --retry gcc@7
        # gcc6+ is currently required to bootstrap vcpkg on macOS
        - brew install gcc@7 || brew link --overwrite gcc@7
        - bundle install --gemfile="macosx/BuildBot/Gemfile"
        - cmake --version
      script:
        - source build_tools/ci/travis/export_build_output_desc.sh
        - macosx/BuildBot/travis_cmake_build.sh "${WZ_BUILD_DESC_PREFIX}-" "tmp/wz_upload"
      # do not deploy

    # Build for macOS (CMake)
    # (This also deploys the macOS build to the buildbot)
    - name: "macOS (CMake) [Xcode 9.4, macOS 10.13 SDK]"
      language: objective-c
      os: osx
      osx_image: xcode9.4
      env:
        - MACOSX_DEPLOYMENT_TARGET=10.10
      before_install:
        - brew update
        - brew upgrade cmake
        - brew install gettext
        # NOTE: Specify an explicit Asciidoctor version to help ensure reproducible builds
        - gem install asciidoctor -v 2.0.9 --no-document
        # gcc6+ is currently required to bootstrap vcpkg on macOS
        - brew install gcc@7 || brew link --overwrite gcc@7
        - bundle install --gemfile="macosx/BuildBot/Gemfile"
        - cmake --version
      script:
        - source build_tools/ci/travis/export_build_output_desc.sh
        - macosx/BuildBot/travis_cmake_build.sh "${WZ_BUILD_DESC_PREFIX}-" "tmp/wz_upload"
      after_success:
        - export DEPLOY_UPLOAD_PATH="${DEPLOY_UPLOAD_PATH}/${WZ_BUILD_DESC_PREFIX}/macOS/"
        - build_tools/ci/travis/travis_deploy.sh "tmp/wz_upload" "warzone2100-${WZ_BUILD_DESC_PREFIX}-*_macOS.zip" --cleanold

    # Build for macOS (CMake)
    - name: "macOS (CMake) [Xcode 10.2, macOS 10.14 SDK]"
      language: objective-c
      os: osx
      osx_image: xcode10.2
      env:
        - MACOSX_DEPLOYMENT_TARGET=10.10
      before_install:
        - brew update
        - brew upgrade cmake
        - brew install gettext
        # NOTE: Specify an explicit Asciidoctor version to help ensure reproducible builds
        - gem install asciidoctor -v 2.0.9 --no-document
        # gcc6+ is currently required to bootstrap vcpkg on macOS
        - brew install gcc@8 || brew link --overwrite gcc@8
        - bundle install --gemfile="macosx/BuildBot/Gemfile"
        - cmake --version
      script:
        - source build_tools/ci/travis/export_build_output_desc.sh
        - macosx/BuildBot/travis_cmake_build.sh "${WZ_BUILD_DESC_PREFIX}-" "tmp/wz_upload"
      # do not deploy

# The channel name "chat.freenode.net#warzone2100-dev" is encrypted against Warzone2100/warzone2100 to prevent IRC spam of forks
notifications:
  irc: 
    channels: 
      - secure: AvYOScfrjmtSqC6+qvVe3nxCjonN07eNp6ebzT3YdBo9e0JH4/elxSJVRC96E8ViSGia/6m8rBWMSEoJhDkykyUSVCn/gHr2FRtCNJz+iJ7ZEgzx90++q5XxtJM4R49e5HDF5dyoImiuwREXXhhqDX1oKCqFRgI4M17XfsYD+NM=
    on_success: always # default: always
    on_failure: always # default: always
    use_notice: true
    skip_join: true
    template:
      - "[travis-ci] \x0313%{repository_slug}\x03/\x036%{branch}\x03 \x0314%{commit}\x03 \x0315%{author}\x03: Build #%{build_number}: \x031%{message}\x03  Build details: %{build_url}"