Skip to content

Latest commit

 

History

History
229 lines (154 loc) · 11.6 KB

manual.md

File metadata and controls

229 lines (154 loc) · 11.6 KB
Raw

Install Netdata on Linux from a Git checkout

To install the latest git version of Netdata, please follow these 2 steps:

  1. Prepare your system

    Install the required packages on your system.

  2. Install Netdata

    Download and install Netdata. You can also update it the same way.

Prepare your system

Use our automatic requirements installer (no need to be root), which attempts to find the packages that should be installed on your system to build and run Netdata. It supports a large variety of major Linux distributions and other operating systems and is regularly tested. You can find this tool here or run it directly with bash <(curl -sSL https://raw.githubusercontent.com/netdata/netdata/master/packaging/installer/install-required-packages.sh). Otherwise read on for how to get requires packages manually:

  • Alpine Linux and its derivatives

    • You have to install bash yourself, before using the installer.

  • Arch Linux and its derivatives

    • You need arch/aur for package Judy.

  • Gentoo Linux and its derivatives

  • Debian Linux and its derivatives (including Ubuntu, Mint)

  • Red Hat Enterprise Linux and its derivatives (including Fedora, CentOS, Amazon Machine Image)

    • Please note that for RHEL/CentOS you need EPEL. In addition, RHEL/CentOS version 6 also need OKay for package libuv version 1.
    • CentOS 8 / RHEL 8 requires a bit of extra work. See the dedicated section below.

  • SUSE Linux and its derivatives (including openSUSE)

  • SLE12 Must have your system registered with SUSE Customer Center or have the DVD. See #1162

Install the packages for having a basic Netdata installation (system monitoring and many applications, without mysql / mariadb, postgres, named, hardware sensors and SNMP):

curl -Ss 'https://raw.githubusercontent.com/netdata/netdata/master/packaging/installer/install-required-packages.sh' >/tmp/install-required-packages.sh && bash /tmp/install-required-packages.sh -i netdata

Install all the required packages for monitoring everything Netdata can monitor:

curl -Ss 'https://raw.githubusercontent.com/netdata/netdata/master/packaging/installer/install-required-packages.sh' >/tmp/install-required-packages.sh && bash /tmp/install-required-packages.sh -i netdata-all

If the above do not work for you, please open a github issue with a copy of the message you get on screen. We are trying to make it work everywhere (this is also why the script reports back success or failure for all its runs).

This is how to do it by hand:

# Debian / Ubuntu
apt-get install zlib1g-dev uuid-dev libuv1-dev liblz4-dev libjudy-dev libssl-dev libelf-dev libmnl-dev gcc make git autoconf autoconf-archive autogen automake pkg-config curl python cmake

# Fedora
dnf install zlib-devel libuuid-devel libuv-devel lz4-devel Judy-devel openssl-devel elfutils-libelf-devel libmnl-devel gcc make git autoconf autoconf-archive autogen automake pkgconfig curl findutils python cmake

# CentOS / Red Hat Enterprise Linux
yum install autoconf automake curl gcc git libmnl-devel libuuid-devel openssl-devel libuv-devel lz4-devel Judy-devel elfutils-libelf-devel make nc pkgconfig python zlib-devel cmake

# openSUSE
zypper install zlib-devel libuuid-devel libuv-devel liblz4-devel judy-devel libopenssl-devel libelf-devel libmnl-devel gcc make git autoconf autoconf-archive autogen automake pkgconfig curl findutils python cmake

Once Netdata is compiled, to run it the following packages are required (already installed using the above commands):

package description
libuuid part of util-linux for GUIDs management
zlib gzip compression for the internal Netdata web server
libuv Multi-platform support library with a focus on asynchronous I/O, version 1 or greater

Netdata will fail to start without the above.

Netdata plugins and various aspects of Netdata can be enabled or benefit when these are installed (they are optional):

package description
bash for shell plugins and alarm notifications
curl for shell plugins and alarm notifications
iproute or iproute2 for monitoring Linux traffic QoS
use iproute2 if iproute reports as not available or obsolete
python for most of the external plugins
python-yaml used for monitoring beanstalkd
python-beanstalkc used for monitoring beanstalkd
python-dnspython used for monitoring DNS query time
python-ipaddress used for monitoring DHCPd
this package is required only if the system has python v2. python v3 has this functionality embedded
python-mysqldb
or
python-pymysql		 used for monitoring mysql or mariadb databases
python-mysqldb is a lot faster and thus preferred
python-psycopg2 used for monitoring postgresql databases
python-pymongo used for monitoring mongodb databases
nodejs used for node.js plugins for monitoring named and SNMP devices
lm-sensors for monitoring hardware sensors
libelf for monitoring kernel-level metrics using eBPF
libmnl for collecting netfilter metrics
netcat for shell plugins to collect metrics from remote systems

Netdata will greatly benefit if you have the above packages installed, but it will still work without them.

Netdata DB engine can be enabled when these are installed (they are optional):

package description
liblz4 Extremely fast compression algorithm, version r129 or greater
Judy General purpose dynamic array
openssl Cryptography and SSL/TLS toolkit

Netdata will greatly benefit if you have the above packages installed, but it will still work without them.

Netdata Cloud support may require the following packages to be installed:

package description
cmake Needed at build time if you aren't using your distribution's version of libwebsockets or are building on a platform other than Linux
openssl Needed to secure communications with the Netdata Cloud

Netdata will greatly benefit if you have the above packages installed, but it will still work without them.

CentOS / RHEL 6.x

On CentOS / RHEL 6.x, many of the dependencies for Netdata are only available with versions older than what we need, so special setup is required if manually installing packages.

CentOS 6.x:

  • Enable the EPEL repo
  • Enable the additional repo from okay.network

And install the minimum required dependencies.

CentOS / RHEL 8.x

For CentOS / RHEL 8.x a lot of development packages have moved out into their own separate repositories. Some other dependencies are either missing completely or have to be sourced by 3rd-parties.

CentOS 8.x:

  • Enable the PowerTools repo
  • Enable the EPEL repo
  • Enable the Extra repo from OKAY

And install the minimum required dependencies:

# Enable config-manager
yum install -y 'dnf-command(config-manager)'

# Enable PowerTools
yum config-manager --set-enabled powertools

# Enable EPEL
yum install -y epel-release

# Install Repo for libuv-devl (NEW)
yum install -y http://repo.okay.com.mx/centos/8/x86_64/release/okay-release-1-3.el8.noarch.rpm

# Install Devel Packages
yum install autoconf automake curl gcc git cmake libuuid-devel openssl-devel libuv-devel lz4-devel make nc pkgconfig python3 zlib-devel

# Install Judy-Devel directly
yum install -y http://mirror.centos.org/centos/8/PowerTools/x86_64/os/Packages/Judy-devel-1.0.5-18.module_el8.1.0+217+4d875839.x86_64.rpm

Install Netdata

Do this to install and run Netdata:

# download it - the directory 'netdata' will be created
git clone https://github.com/netdata/netdata.git --depth=100
cd netdata

# run script with root privileges to build, install, start Netdata
./netdata-installer.sh

  • If you don't want to run it straight-away, add --dont-start-it option.

  • You can also append --stable-channel to fetch and install only the official releases from GitHub, instead of the nightly builds.

  • If you don't want to install it on the default directories, you can run the installer like this: ./netdata-installer.sh --install /opt. This one will install Netdata in /opt/netdata.

  • If your server does not have access to the internet and you have manually put the installation directory on your server, you will need to pass the option --disable-go to the installer. The option will prevent the installer from attempting to download and install go.d.plugin.

Once the installer completes, the file /etc/netdata/netdata.conf will be created (if you changed the installation directory, the configuration will appear in that directory too).

You can edit this file to set options. One common option to tweak is history, which controls the size of the memory database Netdata will use. By default is 3600 seconds (an hour of data at the charts) which makes Netdata use about 10-15MB of RAM (depending on the number of charts detected on your system). Check [[Memory Requirements]].

To apply the changes you made, you have to restart Netdata.

'nonrepresentable section on output' errors

Our current build process unfortunately has some issues when using certain configurations of the clang C compiler on Linux.

If the installation fails with errors like /bin/ld: externaldeps/libwebsockets/libwebsockets.a(context.c.o): relocation R_X86_64_32 against '.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIC, and you are trying to build with clang on Linux, you will need to build Netdata using GCC to get a fully functional install.

In most cases, you can do this by running CC=gcc ./netdata-installer.sh.

What's next?

When you're finished with installation, check out our single-node or infrastructure monitoring quickstart guides based on your use case.

Or, skip straight to configuring the Netdata Agent.

Read through Netdata's documentation, which is structured based on actions and solutions, to enable features like health monitoring, alarm notifications, long-term metrics storage, exporting to external databases, and more.

analytics