SMEmsDemo-Confidential-iOS

A iOS SDK and Demo to Control SIMO EMS Device via BLE.

VersionLog

version	log
1.1.0	Add OTA and presetConfig API
1.0.4	Fixed SN comparing in scanAndConnectDevice missing last 2chars, and fixed timeout param not apply.
1.0.3	Delay 1600ms to call discoverService after BLE be connected.
1.0.2	Fixed SN missing last 2 chars.
1.0.1	Fixed EMS Device's remain exercise second error.
1.0.0	First version

Installation

pod 'SMEmsSDK', :git => "https://github.com/Shenzhen-Simo-Technology-co-LTD/SMEmsSDK-iOS.git"

API

具体操作详见 Demo.

                      
	 /// 开始扫描设备
    /// 开始扫描后, 通过 **didDiscoverDevice** 代理回调
    /// 代理回调
    /// - Parameters:
    ///   - allowDuplicates: 返回列表中是否允许返回重复的设备
    ///   - updateInterval: 回调间隔, 秒
    ///   - timeoutInterval: 超时时间, 0 则永不超时
    public func startScanEmsDevice(allowDuplicates: Bool = true,
                      updateInterval: Double = 2.0,
                      timeoutInterval: Double = 0.0)
                      
    /// 停止所有扫描操作, 包括重连
    public func stopScan() 
    
    /// 扫描并连接指定的设备
    /// - Parameters:
    ///   - sn: 设备SN 号
    ///   - timeout: 超时时间, 设置为 0 则永不超时
    public func scanAndConnectDevice(_ sn: String, timeout: TimeInterval)
                          
                          
    /// 连接指定设备
    /// - Parameter bleDevice: EMS 设备实例
    public func connecteDevice(_ bleDevice: SMEmsDevice, completion: SMCommonCompletion<Any>? = nil) 
    
    /// 断开指定设备的连接
    /// - Parameter bleDevice: EMS 设备实例
    public func disconnectDevice(_ bleDevice: SMEmsDevice) 
    
    /// 断开当前连接的设备
    public func disconnectCurrentDevice()
    
    /// 设置当前模式的 EMS 信号强度
    /// - Parameters:
    ///   - intensity: 有氧/增肌/extend1 - 1 ~ 32 档, 按摩模式 / extend2,3,4,5,6 - 1 ~ 9 档
    ///   - completion: 命令发送完成回调
    public func setIntensity(intensity: Int, completion: SMCommonCompletion<Any>?)
    
    /// 设置训练时长, 单位: 秒
    /// - 运动时 App 会维护一个时钟, 硬件内部也有时钟, 倒计时到了会自动结束. 若 App时钟倒计时先结束应给硬件发送停止运动的指令
    /// - Parameters:
    ///   - seconds: 训练时长
    ///   - completion: 命令发送完成回调
    public func setExerciseSeconds(seconds: Int, completion: SMCommonCompletion<Any>?)
    
    /// 设置训练模式
    /// - Parameters:
    ///   - mode: 训练模式, 有氧/增肌/按摩
    ///   - completion: 命令发送完成回调
    public func setExerciseMode(mode: SMDeviceExerciseMode, completion: SMCommonCompletion<Any>?)
    
    /// 设置运行状态
    /// - Parameters:
    ///   - mode: 运行状态,  开始(继续) / 暂停 / 结束
    ///   - completion: 命令发送完成回调
    public func setRunMode(mode: SMDeviceRunMode, completion: SMCommonCompletion<Any>?)
    
    /// 组合多个命令, 同时发送.
    /// - Parameters:
    ///   - exerciseMode: 训练模式
    ///   - exerciseSeconds: 训练时长, 秒
    ///   - intensity: EMS 信号强度, 有氧/增肌/extend1 - 1 ~ 32 档, 按摩模式 / extend2,3,4,5,6 - 1 ~ 9 档
    ///   - runMode: 运行状态,  开始/暂停/停止
    ///   - completion: 命令发送完成回调
    public func setCommandCommit(exerciseMode: SMDeviceExerciseMode, exerciseSeconds: Int, intensity: Int, runMode: SMDeviceRunMode, completion: SMCommonCompletion<Any>?)
    
    /// 设置运动模式的启用和禁用. 
    /// - 设置后,运动过程中, 通过硬件上的按钮切换模式, 只在已启用的模式中切换
    /// - Parameters:
    ///   - mode: 要设置的模式
    ///   - isEnable: 启用 / 禁用
    ///   - completion: 命令发送完成回调
    public func setExerciseModeEnable(mode: SMDeviceExerciseMode, isEnable: Bool, completion: SMCommonCompletion<Any>?)
    
    /// 读取运动模式的状态
    /// - Parameters:
    ///   - mode: 要读取的模式
    ///   - completion: 命令发送完成回调
    public func readExerciseModeStatus(mode: SMDeviceExerciseMode, completion: SMCommonCompletion<Bool>?)

Screenshot