What to do when upload fails/the program runs abnormally/the device port is not found? | Seeed Studio Wiki

[giscus[bot]]

What to do when upload fails/the program runs abnormally/the device port is not found? | Seeed Studio Wiki

XIAO-FAQ

https://wiki.seeedstudio.com/noport_upload_fails/

[GitHub-Karl]

BootLoader mode doesn't work by pressing boot button while connecting. Is there another method?

[MatthewJeffson]

May I ask what XIAO are you using and if possible proving the images for us?

[GitHub-Karl]

This method does not work, therefore I ask for another method Von: giscus[bot] ***@***.*** Gesendet: Sonntag, 25. Februar 2024 17:11 An: Seeed-Studio/wiki-documents ***@***.***> Cc: GitHub-Karl ***@***.***>; Comment ***@***.***> Betreff: [Seeed-Studio/wiki-documents] What to do when upload fails/the program runs abnormally/the device port is not found? | Seeed Studio Wiki (Discussion #978) What to do when upload fails/the program runs abnormally/the device port is not found? | Seeed Studio Wiki XIAO-FAQ https://wiki.seeedstudio.com/noport_upload_fails/ — Reply to this email directly, view it on GitHub <#978> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AT5OHTTKJYKJGLNYNZMEDFLYVNPBPAVCNFSM6AAAAABDY7GPSWVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZWGI3DSNJSGE> . You are receiving this because you commented.Message ID: ***@***.***>

…

-- Diese E-Mail wurde von Avast-Antivirussoftware auf Viren geprüft. www.avast.com

[GitHub-Karl]

I've made a foto (above I hope

I've made a foto (above I hope it is visible). I had used it with the camera (not to be seen) and it had worked before.

[MatthewJeffson]

This board is XIAO ESP32S3 and enter the BootLoader mode should be like this:
When you found it not working, the board might be broken and if the board is under the warranty period you can ask our tech support for help: [email protected] or [email protected]

[masteclab]

Error, the device port is not found

This is the configuration: