Getting Started | Seeed Studio Wiki

[giscus[bot]]

Getting Started | Seeed Studio Wiki

Quick Guide for Seeed Studio Wiki Platform

https://wiki.seeedstudio.com/Getting_Started/

[tianrking]

：）

[TobiasReich]

Deutsche Antwort folgt.

Sorry, common language is English here so I ask twice. What exactly do you want to achieve? I really love the XIAO ESP32 and they work really well for me - yet you need some technical skills.

--

Was genau möchtest Du denn erreichen. Ich bin auch kein Experte aber die XIAO Dinger sind eigentlich echt gut (wobei sie natürlich nur gewisse technische Voraussetzungen haben).

[GitHub-Karl]

I didn't find a simple guide for installation the ESP32SE sense (cam). I.e.: how will I get the IP-Address of my XIAO. Which of the arduino *.ino are first to be uploaded.

[TobiasReich]

First question, you know that this is not a stand alone ip camera or something similar, right? It is a development board that offers some functionality (like a camera) but not a device you buy, turn on and use as a CCTV or so.

Depending on your setup you might print your IP address to the Serial output.
E.g. something like this Serial.print(WiFi.localIP());
If you are the owner of the WiFi network you can also easily look at your router (e.g. enter fritz.box in your browser and have a look). Once it is connected to the network you should see it in the connected WiFi devices.

[GitHub-Karl]

Thank you, I knew that I didn't buy a stand-alone-cam. I looked for an instruction for board-installation (with cam). What I found, had confused me. I was able to get connection via the arduino blink-script, Then I didn't get further to install the wifi and didn't find in which order I have to install other scripts (and which ones).

[TobiasReich]

I guess it might help to get a specific question. You could also find better help in the forum than on github (which is usually more useful for bug reports than support).
Have a look here:
Forum

and ask your question there.
Also there is a tech support option on the website:
Contacts

[MatthewJeffson]

Happy Launch :D

[olaodou]

good

[robber27199]

For Arduino the actual definitions for the 3-in-one LED is actually:
Red LED = LED_BUILTIN or LED_RED
Blue LED = LED_BLUE
Green LED = LED_GREEN

[MatthewJeffson]

Hi! May I ask what kind of Arduino board are you referred to?

[robber27199]

Sorry, this is in relation to the XIAO nRF52840

[MatthewJeffson]

Okay, thanks! The contents have been changed!

[MatthewJeffson]

Hi! Is it ok that I ask a question: Would you be interested in becoming one of our contributor?:D

[Piepsakul]

I'm looking for the correct configuration within ESPhome for the XIAO esp32s3 sense camera.

This is what is not working:

Example configuration entry

esp32_camera:
name: My Camera
external_clock:
pin: GPIO11
frequency: 20MHz
i2c_pins:
sda: GPIO40
scl: GPIO39
data_pins: [GPIO15, GPIO17, GPIO18, GPIO16, GPIO14, GPIO12, GPIO11, GPIO48]
vsync_pin: GPIO38
href_pin: GPIO47
pixel_clock_pin: GPIO13

reset_pin: GPIO48

resolution: 640x480
jpeg_quality: 10

[MatthewJeffson]

Hi, we are still trying to find people who can help us to support ESPhome for the XIAO esp32s3 sense, which is an assignment under our contributor program.
May I ask would you be interested in it?
Regards!

[Piepsakul]

I'm sorry, but I don't think I'm qualified to do the job.

[MatthewJeffson]

We are looking forward to any contributions(suggesting updates for wiki platform, fixing typos to wiki documents, accepting the assignments)
We will provide our products to our contributors as a token of appreciation.
No matter how. It is good to have a conversation with you.:D

[Eee14]

I get the following error while compiling:

In file included from c:\Users\${UserName}\Documents\Arduino\libraries\TFT_eSPI/TFT_eSPI.h:68:0,
                 from c:\Users\${UserName}\Documents\Arduino\libraries\Seeed_Arduino_RoundDisplay-main\src/lv_xiao_round_screen.h:29,
                 from C:\Users\${UserName}\AppData\Local\Temp\.arduinoIDE-unsaved2023629-19620-13g6uvy.5asa\HardwareTest\HardwareTest.ino:7:
c:\Users\${UserName}\Documents\Arduino\libraries\TFT_eSPI/User_Setup_Select.h:96:10: fatal error: User_Setups/Setup66_Seeed_XIAO_RoundDisplay.h: No such file or directory
 #include <User_Setups/Setup66_Seeed_XIAO_RoundDisplay.h>
          ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.

exit status 1

Compilation error: exit status 1

How can I fix this?

[MatthewJeffson]

Hi! Thank you for your interests in our products! Would you mind check with our tech support platforms? https://wiki.seeedstudio.com/Getting_Started/#tech-support--product-discussion

[Eee14]

Finally! I found the problem!
I was following the text step "#include <User_Setups/Setup66_Seeed_XIAO_RoundDisplay.h>", now I follow this image:

change it to "#include <User_Setups/Setup66_Seeed_XIAO_Round.h>" then Example HardwareTest works!🤣

[MatthewJeffson]

Haha wow! Glad you working it out and thanks for sharing it!
Are you interested being one of our contributor?

[Eee14]

Thanks, but I'm too busy to help you guys right now.

[Piepsakul]

I checked all platforms but there is no simple guide to get the camera working with ESPhome

[MatthewJeffson]

Hi! I really appreciate your efforts! Thanks for checking it.

[GitHub-Karl]

So did I. I didn't find a simple guide. The above didn't help. I.e.: how will I get the IP-Address of my XIAO. Which of the arduino *.ino are first to be uploaded. And so on!

[lmanliang]

I follow the
https://wiki.seeedstudio.com/XIAO_BLE/#battery-charging-current

but

xxx.ino:113:11: error: 'P0' was not declared in this scope; did you mean 'A0'?
  113 |   pinMode(P0 .13, OUTPUT);

I has try P0.13, P0_13, D14,D22

pin not defined ?

I use the macOS
Seeed XIAO nRF52840 Sense
VID 8x2886
PID 0x8045

[MatthewJeffson]

mine working OK. But thanks to you I found a missing "(" on the wiki and I will change it soon

[lmanliang]

I found difference.
The Speedd nRF52 Boards 1.1.1. not defined the P0_13,
then Seeed nRF52 med-enabled Board has defined.

[MatthewJeffson]

Wow! Thank you for pointing it out! Have you learnt our contributor project? Really looking forward that we can build some together with the products you have.

[lmanliang]

How can get battery volt for now?
this wiki not found this information's.

How can I know the usb cable is plugged in?

I has seem https://forum.seeedstudio.com/t/xiao-nrf52840-how-to-detect-if-usb-c-cable-is-plugged-in/270595

but I'm use Arduino IDE

[lmanliang]

sorry, tolate seem this.

My Device is
I use the macOS
Seeed XIAO nRF52840 Sense
VID 8x2886
PID 0x8045

my application need
check usb cable has plugin, P14 set to High

because
https://wiki.seeedstudio.com/XIAO_BLE/#q3-what-are-the-considerations-when-using-xiao-nrf52840-sense-for-battery-charging

I currently have three 52840s. After connecting the USB, it generates high heat. I suspect this is the reason.

[xzxcessarr]

Hello, if your wanna just plug the usb cable in and detect it is difficult but use the RTOS like the freeRTOS, but you can use the similar way:

1. init the "serial" by the "Serial.begin(9600);" to initize your serial of usb, and set the function "if Serial.available()!=0" for detect whether the serial is available, you can add digitalWrite(P14,HIGH) into it.
2. use the board or other device send a message at the brud rate and your board will detect and execute it

[lmanliang]

Thanks for you recommend.
but I use this create products, the user behavior plugin the usb cable, devices usually not in power off mode, is run something.
so if P_14 to low, I'm plugin the usb, the board maybe burn.
P_14 to HIGH, I can't read batt.

[xzxcessarr]

Hello, from your description, I think you can try freeRTOS, it has component designed for hot plugging

[lmanliang]

sorry, my english is bad.

I just need to know, battery is very low for now,alert user chage.
not need real battery voltage.

P0_31 max is 3.6V,
use P0.14 read battery is work, but LI-PO maybe 4.2v, so if use P0.14, the voltage maybe voltage too high, so brun P0.31.

so why not change mind, I juse need to alter user chage?
so we can on board 3.3v pin connect to A0

and

int cg = analogRead(A0);
float batt = ((3.7* cg) / 1024);

if batt low to 3.0, alert user , need the chage.

Is this idea correct?
I'm not sure there's a risk

this is output data:
USB cable has plugin, and has LI-PO 3.7V battery
Avometer is 3.3v

3.38
3.38
3.38
3.37
3.37

but remove USB cable and battery to low, the number maybe is 3.0.

[dwj66]

the GPIO5 is not able to read the analog signal, which means the ADC2 is disabled, how can I enable ADC2 in arduino IDE?

[xzxcessarr]

Hi, thanks for feedback, can you tell me which board are you mention?

[julianobst]

ADC2 is disabled for ESP32-C3 according to issues with the ADC. A/D conversion on ADC2 are not reliable.
espressif/esp-idf#10135

However, A3/D3 is not really useable as ADC channel on the XIAO ESP32C3.

[lmanliang]

Can give me full version Devicetree overlays and KConfig?
arduino may be can may not meet my needs, I am going to use ncs to re-develop

[TobiasReich]

I'm experiencing issues with the hardware serial functionality for UART.
E.g. when communicating with the Adafruit Soundboard I have a code like that:

#include <Adafruit_Soundboard.h>
#include <HardwareSerial.h>

#define SFX_RST 8

Adafruit_Soundboard sfx = Adafruit_Soundboard(&Serial1, NULL, SFX_RST);

void setup() {
  Serial.begin(9600); 
  Serial1.begin(9600);

  if (!sfx.reset()) {
    Serial.println("Not found");
    while (!Serial1) { /* wait until it is connected*/ }
  }
  Serial.println("SFX board found");
  uint8_t files = sfx.listFiles();
  Serial.print("Found "); Serial.print(files); Serial.println(" Files");
}

It can't communicate with the device (finding 0 files). However when I'm switching to SoftwareSerial the same code looks fine.
E.g.

    #include <Adafruit_Soundboard.h>
    #include <SoftwareSerial.h>

    #define SFX_TX 6
    #define SFX_RX 7
    #define SFX_RST 8

    SoftwareSerial ss = SoftwareSerial(SFX_TX, SFX_RX);   // <---- this worked, hardware did not?!
    Adafruit_Soundboard sfx = Adafruit_Soundboard(&ss, NULL, SFX_RST);

    void setup() {
    Serial.begin(115200); 
    ss.begin(9600);
    if (!sfx.reset()) {
        Serial.println("Not found. Waiting...");
        while (!ss) { /* wait until it is connected*/ }
    }
    Serial.println("SFX board found");
    uint8_t files = sfx.listFiles();
    Serial.print("Found "); Serial.print(files); Serial.println(" Files");
    }

Any idea what is going on?

[seigel]

If you go to this section, your answers should be answered:

https://wiki.seeedstudio.com/XIAO_ESP32C3_Pin_Multiplexing/#serial

[ab-tools]

What is exposed via the JST 1.25 connector?

[ab-tools]

Disregard please, I do understand now that this is the connector for the battery.

[ab-tools]

Is it still possible to use at least some GPIO PINs from the base board while it is connected to this display?

[ab-tools]

Hello Matthew, first thanks for your quick reply!

My question was about your round touch screen (Seeedstudio 104030087) in combination with one of your XIAO base board, e. g. the ESP32 one (Seeedstudio 113991114):
It's great to be able to directly connect the base board to the screen, but we would still need some additional IO (including UART).

Is there a way to still use some GPIOs from the ESP32 base board for other things than just the LCD/touch screen connection?

Thanks
Andreas

[MatthewJeffson]

Hi Andreas!
I think that indeed is good question and a great proposal. Because of size maintenance issue, there might be not two line additional interfaces. I will try to inform this to the product manager and hopefully incorporate it in the next iteration...
Sorry for now there might not be any good ways to manage that.
Regards,
Matthew

[ab-tools]

Hello Matthew,

hm, understood, appreciating the quick reply.

We really like your small, round touch screen and would still like to use that for our application.
Do you foresee any problems using your touch screen (Seeedstudio 104030087) with a different base board (but still based on an ESP32 or RP2040, of course)?

E. g. simply a standard ESP32-S3 Dev Board or the "official" Raspberry Pi Pico?

It's clear that it cannot be just hooked up together as simple as when using your base board then, but I would assume that your touch screen should in general work with any base board using an ESP32 or RP2040 chip set, correct?

If so, this would at least allow us to use your round touch screen, even if we are unable to use your base boards due to missing GPIOs.

Best regards
Andreas

[MatthewJeffson]

Hi Andreas,
I'm sorry but it also requires specific libraries for ESP32-S3 Dev Board or the "official" Raspberry Pi Pico, since the IO definitions among them are different. You can change the libraries we provided which might be a solution...
For what's worth, maybe you can leave some gap when you trying to connect with XIAO and the touch screen, then connect a wire with the exposed pin.
Sorry for the inconvenience.XD
Regards,
Matthew

[ab-tools]

Hello Matthias,

I'm sorry but it also requires specific libraries for ESP32-S3 Dev Board or the "official" Raspberry Pi Pico, since the IO definitions among them are different.

What do you mean by "IO definitions"?
I would expect that your base board at the end only provides access to a certain subset of IO PINs of the ESP32/RP2040 base MCU. So while the exposed PINs (and especially their order) might be different compared to other boards, when connecting the correct PINs together, it should "just work". Or do I miss something here?

For what's worth, maybe you can leave some gap when you trying to connect with XIAO and the touch screen, then connect a wire with the exposed pin.

Not sure if I understand your suggestion correctly:
I mean, physically connecting to the PINs is not the problem here - we can just solder some wires on the back side additionally.

But if I understand your "hardware usage" page here
https://wiki.seeedstudio.com/seeedstudio_round_display_usage/
correctly, your round display in fact actually uses almost all of the connected PINs!

Would it then not cause conflicts when we "leave some gap and connect a wire with the exposed pin" additionally to have your touch screen connected?

Best regards and thanks for your support
Andreas

[prashik61]

Hello,

I am working with the Max30100 sensor and the Xiao ESP32-C3 board. I want to view data on the serial monitor, but nothing is being printed. What should I do? To verify, I tested the code with an ESP32 Dev board, and it successfully printed data on the serial monitor. Now, I'm wondering about the procedure for the Xiao ESP32-C3 board. Do I need any specific drivers for serial communication?

[domiluci]

Take a look here: https://forum.seeedstudio.com/t/xiao-esp32c3-wont-program-without-manually-entering-bootloader-mode/269736

[domiluci]

They kind of bailed before finding a solution, but there's a bug with the C3's Serial function relating to DTR/RTS. Not sure if this still applies with Native USB's Serial functionality, or the XIAO C3 (I have yet to test mine), but there's a couple fixes available, albeit hard to find. The one I used involves editing the Arduino ESP32 lib's board file. But I wouldn't do that here unless it's a last resort, despite being safe.

[BastelBaus]

Very nice product and docu. Thanks!

One feature request / proposal would be very helpfull. Sell the XIAO ESP32S3 w/ connector soldered and offer a extention board which fits to the connector and brings most of the PINs to a second small board (same dimensions) on top of the normal board. This could be used by useres who would like to use more of the IOs for other purposes. Could be a quite cheap board and usefull extention and keep the very nice form factor (gets only thicker).

BR,
Bastel Baus

[KASSIMSAMJI]

Hello There

I am trying to compile the TFT_eSPI library with Seeed XIAO BLE nRF5 selected but I end up having bunch of errors

But If I compile it with Seeed XIAO nRF5 selected, TFT works, ArduinoBLE no longer works

Any help is really appreciated

[userpc42069]

can i make seed xiao sense board to host its own wifi to transmit video? or make it a static IP?

[TobiasReich]

The XIAO ESP32S3 Sense has a camera and wifi.
So you can easily create a tiny "web server" and transmit the video there.
Be aware that the tiny camera - though on paper offers 1600 x 1200 - is not the best quality. But I did something similar and it works perfectly fine.
You might have a look for how things are done at his project for instance:
[https://www.instructables.com/Camera-NanoTank/]

[Piepsakul]

I'm looking for the correct configuration for ESPHOME.

On there are standard configurations for most common camera modules like AI-Thinker, M5Stack, TTGO, ESP-EYE, etcetera.

Can anyone please add the configuration for ESPHOME to this list?

[khvolk]

I just ran into problems trying your deep-sleep example. The example worked, as far I could see: in deep sleep there is no more serial connection. But worse: I could not reprogram the esp32c3. I think it got to deep sleep every time I connected it. These tiny push buttons were no help with it:

Okt 01 11:48:00 george kernel: usb 5-2.2: new full-speed USB device number 9 using xhci_hcd
Okt 01 11:48:01 george kernel: usb 5-2.2: New USB device found, idVendor=303a, idProduct=1001, bcdDevice= 1.01
Okt 01 11:48:01 george kernel: usb 5-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Okt 01 11:48:01 george kernel: usb 5-2.2: Product: USB JTAG/serial debug unit
Okt 01 11:48:01 george kernel: usb 5-2.2: Manufacturer: Espressif
Okt 01 11:48:01 george kernel: usb 5-2.2: SerialNumber: EC:DA:3B:AA:B6:AC
Okt 01 11:48:01 george kernel: cdc_acm 5-2.2:1.0: ttyACM0: USB ACM device
Okt 01 11:48:01 george mtp-probe[4206]: checking bus 5, device 9: "/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.4/usb5/5-2/5-2.2"
Okt 01 11:48:01 george mtp-probe[4206]: bus: 5, device: 9 was not an MTP device
Okt 01 11:48:01 george mtp-probe[4209]: checking bus 5, device 9: "/sys/devices/pci0000:00/0000:00:08.1/0000:0a:00.4/usb5/5-2/5-2.2"
Okt 01 11:48:01 george mtp-probe[4209]: bus: 5, device: 9 was not an MTP device
Okt 01 11:48:01 george kernel: usb 5-2.2: USB disconnect, device number 9

Though I have bricked it! I could solve this with my Notebook under Windows flashing the "blink-example" to ist. puuuh.

I recommend to have a back door if you try this example.

[alethux]

I have tried this method a bunch of times but it does not work for me. I've tried 4 different USB cables and three different computers and nothing :/ The only thing I can tell from my USB hub is that every 5 seconds it "connects" but immediately goes off. I guess that the time to establish a proper connection is too short.

[julianobst]

Do you may have connected D8/GPIO8 and pulled to low level? According to the ESP documentation, this pin must be driven high level while pressing the boot & reset button to access bootloader mode reliably.
Maybe give it a try. Set D8 to high level and repeat the button sequence.

See https://docs.espressif.com/projects/esptool/en/latest/esp32c3/advanced-topics/boot-mode-selection.html.

Edit:
By the way, the boot button is connected to D9/GPIO9. You should leave this pin unconnected. Otherwise you may will not be able to enter the bootloader mode.

Furthermore, D0/GPIO2 should be also pulled high to avoid "glitches" according to datasheet (chapter 2.6.1)
https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf

[alethux]

So, I've tinkered on it for an hour now and have been unsuccessful with any combination. I've read the documents and I have to admit that is a bit confusing that the espressif datasheet states that D9 has to be high but on the Boot Selection document it states that it has to be low? But maybe that is just me. At this point though, I am not sure what other options I have left.

Edit: OK, I completely misread the pinout: GPIO9 is D10 and not D9. This is also true for the other pins so I have been trying the whole time with the wrong pins... I'll try it out in the next hours and see whether I can make it work.

[julianobst]

@alethux any success?

[alethux]

No luck on my side :/ I asked other people and checked with them what their procedures would be and it is just very likely that it is broken. Thanks a lot for taking your time helping me out. I appreciate it a lot.

[hbswn]

Has anyone found how to upgrade the firmware using Linux ?

[hbswn]

To answer my own question: Standard Toolchain Setup for Linux and macOS

[AndreasWes]

Hi,
I got a weird problem.

I wired my XIAO ESP32C3 to a Ultimate GPS board by Arduino and ran the example code for the GPS.
Since then the XIAO is not recogniced when connected via USB.

Do you have any idea how to solve the issue?

[AndreasWes]

I found a solution:
I first deinstalled all the Port as mentioned in a forum.
This didnt help by itself.
I found this hint in a different forum which worked for me:
“first of all push and keep the boot button(in xiao esp32c3), then connect the usb cable to the pc.”

XIAO esp32c3 Unknown USB Device (Device Descriptor Request Failed) - Products & Technology / Arduino & Seeeduino - Seeed Forum (seeedstudio.com)

[AndreasWes]

Link to the first forum:
https://forum.seeedstudio.com/t/seeeduino-xiao-usb-port-stopped-being-recognized-by-windows-10/252618/11
Link to the second forum:
https://forum.seeedstudio.com/t/xiao-esp32c3-unknown-usb-device-device-descriptor-request-failed/265933/12

[73Volvo]

Is it possible to use an SD card board on the ESP32S2 board? It seems to work fine with a 32GB card on my Seeed SAMD21 board, but always fails on the ESP32S2 board.

[cmezab]

Hello. I have followed the "Getting Started" for the STM32MP135D. All steps works fine, but I am not able to finish the installation of the image file. I get the following message after I run "make" to create the image:

--2023-11-04 21:56:48-- https://sources.buildroot.net/linux/linux-v6.1-stm32mp-odyssey-r3-br1.tar.gz
Resolving sources.buildroot.net (sources.buildroot.net)... 2606:4700:20::681a:25, 2606:4700:20::ac43:4838, 2606:4700:20::681a:125, ...
Connecting to sources.buildroot.net (sources.buildroot.net)|2606:4700:20::681a:25|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2023-11-04 21:56:49 ERROR 404: Not Found.

Could you help me?

[SimonTratter123]

Hello, I want to know how accurate the internal RTC is if it has one?

[faizannazir]

Can i use jtag pin GPIO41 and 42 as they are declard digital pins in excel sheet D11 and D12

[kathatp]

Can you please amend your instructions to clarify which board library to install. There are 2 libraries called ESP32:

1. Arduino ESP32 Boards by Arduino
2. esp32 by Espressif Systems

[faizannazir]

Now it moved to esp32 by espressif

[kathatp]

Thank you @faizannazir. I think it would be great to update this page, so people don't choose the wrong one.

[dchrzan]

what kind of battery would be recomended for XIAO ESP32C3? Li-Ion? LI-Po? other?

[sankeycoder7]

m having trouble setting up my LoRaWAN module (WM1302) with my BeagleBone.
I’ve connected everything, but I keep getting these errors:
ERROR: sx1250 Image Calibration Error
ERROR: radio calibration failed ERROR: radio calibration failed
ERROR: [main] failed to start the concentrator
using the sx1302_hal library as per guidance of seeed studio LoRaWAN® Gateway Module WM1302 | Seeed Studio Wiki

configure the those pin on beagle bone :

Current mode for P9_17 is: spi_cs

Current mode for P9_21 is: spi

Current mode for P9_18 is: spi

Current mode for P9_22 is: spi_sclk

Current mode for P9_11 is: gpio (reset pin)

but I’m still facing the same issue

[monajalal]

How should I fix this error?

We have Jetson Orin NX 16G from you.

2024-07-15 16:47:20 [mona@DOS Downloads]$ sudo tar xpf mfi_recomputer-orin-nx-16g-j401-6.0-36.3.0-2024-07-04.tar.gz 
[sudo] password for mona: 
2024-07-15 16:49:53 [mona@DOS Downloads]$ cd mfi_recomputer-orin-j401/
2024-07-15 16:50:35 [mona@DOS mfi_recomputer-orin-j401]$ ks
ks: command not found
2024-07-15 16:50:36 [mona@DOS mfi_recomputer-orin-j401]$ ls
total 144K
drwxr-xr-x 18 root root 4.0K Jul  3 19:04 rootfs
drwxr-xr-x  3 root root  36K Jul  3 19:11 bootloader
drwxr-xr-x  3 root root 4.0K Jul  3 19:11 tools
-rw-r--r--  1 root root 2.6K Jul  3 19:11 recomputer-orin-j401.conf
-rw-r--r--  1 root root 8.0K Jul  3 19:11 p3767.conf.common
-rw-r--r--  1 root root 3.7K Jul  3 19:11 p3737-0000-p3701-0000.conf.common
-rw-r--r--  1 root root 8.5K Jul  3 19:11 p3701.conf.common
drwxr-xr-x  5 root root 4.0K Jul  3 19:11 .
drwxrwxr-x 68 mona mona  64K Jul 15 16:47 ..
2024-07-15 16:50:37 [mona@DOS mfi_recomputer-orin-j401]$ sudo ./tools/kernel_flash/l4t_initrd_flash.sh --flash-only --massflash 1 --network usb0  --showlogs
/home/mona/Downloads/mfi_recomputer-orin-j401/recomputer-orin-j401.conf: line 29: /home/mona/Downloads/mfi_recomputer-orin-j401/p3768-0000-p3767-0000-a0.conf: No such file or directory
/home/mona/Downloads/mfi_recomputer-orin-j401/recomputer-orin-j401.conf: line 29: /home/mona/Downloads/mfi_recomputer-orin-j401/p3768-0000-p3767-0000-a0.conf: No such file or directory
/home/mona/Downloads/mfi_recomputer-orin-j401/tools/kernel_flash/l4t_initrd_flash_internal.sh --network usb0 --usb-instance 3-7 --device-instance 0 --flash-only --external-device nvme0n1p1 -c "tools/kernel_flash/flash_l4t_nvme.xml" -S 80GiB --network usb0 recomputer-orin-j401 external
/home/mona/Downloads/mfi_recomputer-orin-j401/recomputer-orin-j401.conf: line 29: /home/mona/Downloads/mfi_recomputer-orin-j401/p3768-0000-p3767-0000-a0.conf: No such file or directory
# Entry added by NVIDIA initrd flash tool
/home/mona/Downloads/mfi_recomputer-orin-j401/tools/kernel_flash/tmp 127.0.0.1(rw,nohide,insecure,no_subtree_check,async,no_root_squash)
Export list for localhost:
/home/mona/Downloads/mfi_recomputer-orin-j401/tools/kernel_flash/tmp 127.0.0.1
/home/mona/Downloads/mfi_recomputer-orin-j401/recomputer-orin-j401.conf: line 29: /home/mona/Downloads/mfi_recomputer-orin-j401/p3768-0000-p3767-0000-a0.conf: No such file or directory
**********************************************
*                                            *
*  Step 1: Build the flashing environment    *
*                                            *
**********************************************
Create flash environment 0
/home/mona/Downloads/mfi_recomputer-orin-j401/bootloader /home/mona/Downloads/mfi_recomputer-orin-j401
/home/mona/Downloads/mfi_recomputer-orin-j401
Finish creating flash environment 0.
****************************************************
*                                                  *
*  Step 2: Boot the device with flash initrd image *
*                                                  *
****************************************************
/home/mona/Downloads/mfi_recomputer-orin-j401/temp_initrdflash/bootloader0 /home/mona/Downloads/mfi_recomputer-orin-j401
./tegraflash.py --bl uefi_jetson_with_dtb_sigheader.bin.encrypt --bct br_bct_BR.bct --securedev  --bldtb tegra234-j401-p3768-0000+p3767-0000-recomputer.dtb --applet rcm_2_encrypt.rcm --applet_softfuse rcm_1_encrypt.rcm --cmd "rcmboot"  --cfg secureflash.xml --chip 0x23 --mb1_bct mb1_bct_MB1_sigheader.bct.encrypt --mem_bct mem_rcm_sigheader.bct.encrypt --mb1_cold_boot_bct mb1_cold_boot_bct_MB1_sigheader.bct.encrypt --mb1_bin mb1_t234_prod_aligned_sigheader.bin.encrypt --psc_bl1_bin psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --mem_bct_cold_boot mem_coldboot_sigheader.bct.encrypt  --bins "psc_fw pscfw_t234_prod_sigheader.bin.encrypt; mts_mce mce_flash_o10_cr_prod_sigheader.bin.encrypt; tsec_fw tsec_t234_sigheader.bin.encrypt; mb2_applet applet_t234_sigheader.bin.encrypt; mb2_bootloader mb2_t234_with_mb2_cold_boot_bct_MB2_sigheader.bin.encrypt; xusb_fw xusb_t234_prod_sigheader.bin.encrypt; pva_fw nvpva_020_sigheader.fw.encrypt; dce_fw display-t234-dce_sigheader.bin.encrypt; nvdec nvdec_t234_prod_sigheader.fw.encrypt; bpmp_fw bpmp_t234-TE980M-A1_prod_sigheader.bin.encrypt; bpmp_fw_dtb tegra234-bpmp-3767-0000-a02-3509-a02_with_odm_sigheader.dtb.encrypt; rce_fw camera-rtcpu-t234-rce_sigheader.img.encrypt; ape_fw adsp-fw_sigheader.bin.encrypt; spe_fw spe_t234_sigheader.bin.encrypt; tos tos-optee_t234_sigheader.img.encrypt; eks eks_t234_sigheader.img.encrypt; kernel boot0.img; kernel_dtb tegra234-j401-p3768-0000+p3767-0000-recomputer.dtb"    --bct_backup  --instance 3-7
Welcome to Tegra Flash
version 1.0.0
Type ? or help for help and q or quit to exit
Use ! to execute system commands
 

 Entering RCM boot

[   0.0252 ] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from --mb1_bin
[   0.0252 ] psc_bl1_t234_prod_aligned_sigheader.bin.encrypt filename is from --psc_bl1_bin
[   0.0252 ] rcm boot with presigned binaries
[   0.0255 ] tegrarcm_v2 --instance 3-7 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
[   0.0257 ] BR_CID: 0x80012344705DF0C38000000005FE80C0
[   0.0356 ] Sending bct_br
[   0.0441 ] ERROR: might be timeout in USB write.
Error: Return value 3
Command tegrarcm_v2 --instance 3-7 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
Cleaning up...

[feiticeir0]

Did you try changing the USB cable ?

[monajalal]

@feiticeir0 no I didn't. I just unplugged the same USB-C bunch of times and got it working.