BoardConfig.mk

#
# Copyright 2017 The Android Open Source Project
#
# Copyright (C) 2019-2020 OrangeFox Recovery Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

# This contains the module build definitions for the hardware-specific
# components for this device.
#
# As much as possible, those components should be built unconditionally,
# with device-specific names to avoid collisions, to avoid device-specific
# bitrot and build breakages. Building a component unconditionally does
# *not* include it on all devices, so it is safe even with hardware-specific
# components.

DEVICE_PATH := device/xiaomi/beryllium

# Android Verified Boot
BOARD_AVB_ENABLE := false
BOARD_BUILD_DISABLED_VBMETAIMAGE := true

# Architecture
TARGET_ARCH := arm64
TARGET_ARCH_VARIANT := armv8-a
TARGET_CPU_ABI := arm64-v8a
TARGET_CPU_ABI2 :=
TARGET_CPU_VARIANT := generic
TARGET_CPU_VARIANT_RUNTIME := kryo385

TARGET_2ND_ARCH := arm
TARGET_2ND_ARCH_VARIANT := armv8-a
TARGET_2ND_CPU_ABI := armeabi-v7a
TARGET_2ND_CPU_ABI2 := armeabi
TARGET_2ND_CPU_VARIANT := generic
TARGET_2ND_CPU_VARIANT_RUNTIME := kryo385

# Kernel
BOARD_KERNEL_CMDLINE := \
    androidboot.console=ttyMSM0 \
    androidboot.configfs=true \
    androidboot.hardware=qcom \
    androidboot.usbcontroller=a600000.dwc3 \
    console=ttyMSM0,115200n8 \
    earlycon=msm_geni_serial,0xA84000 \
    ehci-hcd.park=3 \
    loop.max_part=7 \
    lpm_levels.sleep_disabled=1 \
    msm_rtb.filter=0x237 \
    service_locator.enable=1 \
    swiotlb=2048 \
    video=vfb:640x400,bpp=32,memsize=3072000

BOARD_KERNEL_CMDLINE += androidboot.selinux=permissive

BOARD_KERNEL_BASE := 0x00000000
BOARD_KERNEL_IMAGE_NAME := Image.gz-dtb
BOARD_KERNEL_PAGESIZE := 4096
BOARD_KERNEL_TAGS_OFFSET := 0x00000100
BOARD_RAMDISK_OFFSET     := 0x01000000

NEED_KERNEL_MODULE_SYSTEM := true

TARGET_KERNEL_ARCH := arm64
TARGET_PREBUILT_KERNEL := $(DEVICE_PATH)/Image.gz-dtb

# OTA
TARGET_OTA_ASSERT_DEVICE := beryllium

# Partitions
BOARD_FLASH_BLOCK_SIZE := 262144
BOARD_BOOTIMAGE_PARTITION_SIZE := 67092480
BOARD_RECOVERYIMAGE_PARTITION_SIZE := 67092480
BOARD_SYSTEMIMAGE_PARTITION_SIZE := 3221225472
BOARD_SYSTEM_EXTIMAGE_PARTITION_SIZE := 872415232
BOARD_USERDATAIMAGE_PARTITION_SIZE := 57453555712
BOARD_VENDORIMAGE_PARTITION_SIZE := 1073741824
BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_SYSTEMIMAGE_PARTITION_TYPE := ext4
BOARD_SYSTEM_EXTIMAGE_FILE_SYSTEM_TYPE := ext4
BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4

# Workaround for error copying vendor files to recovery ramdisk
TARGET_COPY_OUT_SYSTEM_EXT := system_ext
TARGET_COPY_OUT_VENDOR := vendor

# System as root
BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
BOARD_ROOT_EXTRA_FOLDERS := bluetooth dsp firmware persist
BOARD_SUPPRESS_SECURE_ERASE := true
TARGET_USES_UEFI := true

# Platform
TARGET_BOARD_PLATFORM := sdm845
TARGET_BOARD_PLATFORM_GPU := qcom-adreno630

# Recovery
BOARD_HAS_LARGE_FILESYSTEM := true
BOARD_HAS_NO_SELECT_BUTTON := true
TARGET_RECOVERY_FSTAB := $(DEVICE_PATH)/recovery/root/system/etc/recovery.fstab
TARGET_RECOVERY_PIXEL_FORMAT := "BGRA_8888"
TARGET_USERIMAGES_USE_EXT4 := true
TARGET_USERIMAGES_USE_F2FS := true

# Broken Rules
BUILD_BROKEN_DUP_RULES := true
BUILD_BROKEN_ELF_PREBUILT_PRODUCT_COPY_FILES := true