Vulkan Radix Sort

GPU Radix Sort implemented in Vulkan and GLSL.

The implementation is based on Intel's Embree sorting kernel:

• https://github.com/embree/embree/blob/v4.0.0-ploc/kernels/rthwif/builder/gpu/sort.h

Tested on Linux with NVIDIA RTX 3070 GPU and on Linux with AMD Radeon RX Vega 7 GPU.

(IMPORTANT) Single vs. Multi Radix Sort

This repository contains two implementations of the radix sort on the GPU: The single_radixsort uses only a single work group, consists of one shader and is easy to set up. The multi_radixsort uses multiple work groups, consists of two shaders that have to be executed several times in succession alternately and is therefore more complicated to set up but yields higher performance for larger number of elements.

single_radixsort (single work group)	multi_radixsort (multiple work groups)
+ easy to set up	- more complicated to set up
+ yields good performance for fewer elements (<10k)	+ yields good performance even for a large number of elements

For detailed information on integrating the shaders and for timings see below.

(IMPORTANT) NVIDIA vs. AMD

The shaders are configured for NVIDIA GPUs. If you are using an AMD GPU, set SUBGROUP_SIZE=64 in single_radixsort.comp or multi_radixsort.comp.

Table of Contents

• Example Usage (reference implementation in Vulkan)
  • Compile / Run
  • Interesting Files
• Own Usage: Single Radix Sort (how to use the single_radixsort / the compute shader in your own Vulkan project)
  • Shaders / Compute Pass
  • Buffers
  • Push Constants
  • Execute
• Own Usage: Multi Radix Sort (how to use the multi_radixsort / the compute shaders in your own Vulkan project)
  • Number of Blocks per Work Group
  • Shaders / Compute Pass
  • Buffers
  • Push Constants
  • Execute
• Timings

Example Usage

This repository contains a reference implementation to show how to use the provided shaders.

Compile / Run

Requirements: Vulkan, glm

git clone --recursive [email protected]:MircoWerner/VkRadixSort.git
cd VkRadixSort
mkdir build
cd build
cmake ..
make

single_radixsort

cd singleradixsort
./singleradixsortexample

multi_radixsort

cd multiradixsort
./multiradixsortexample

Interesting Files

	single_radixsort	multi_radixsort
shaders	singleradixsort/resources/shaders/single_radixsort.comp	multiradixsort/resources/shaders/multi_radixsort_histograms.comp multiradixsort/resources/shaders/multi_radixsort.comp
compute pass	singleradixsort/include/SingleRadixSortPass.h singleradixsort/src/SingleRadixSortPass.cpp	multiradixsort/include/MultiRadixSortPass.h multiradixsort/src/MultiRadixSortPass.cpp
program logic (buffer definition, assigning push constants, execution...)	singleradixsort/include/SingleRadixSort.h singleradixsort/src/SingleRadixSort.cpp	multiradixsort/include/MultiRadixSort.h multiradixsort/src/MultiRadixSort.cpp

Own Usage: Single Radix Sort

Explanation how to use the single_radixsort in your own Vulkan project. Assume you have a vector/array of uint32_t (you have to preprocess negative numbers; uint64_t requires to adjust the number of iterations defined in the shader) with a size of NUM_ELEMENTS.

Shaders / Compute Pass

Copy the following shader to your project:

single_radixsort.comp

Create a compute pass consisting of the single compute shader.

Set the global invocation size of the shader:

single_radixsort: (256, 1, 1) // 256=WORKGROUP_SIZE defined in single_radixsort.comp, i.e. we just want to launch a single work group

Buffers

Create the following two buffers and assign them to the following sets and indices of your compute pass:

buffer	size (bytes)	initialize	(set,index)
m_buffer0	NUM_ELEMENTS * sizeof(uint32_t)	vector of elements	(0,0)
m_buffer1	NUM_ELEMENTS * sizeof(uint32_t)	-	(0,1)

Use VK_BUFFER_USAGE_STORAGE_BUFFER_BIT and VK_MEMORY_PROPERTY_DEVICE_LOCAL_BIT. m_buffer0 is the input buffer and will also contain the sorted output. m_buffer1 is used during the computation (ping pong buffer).

Push Constants

Define the following push constant struct for the shader and set its data:

struct PushConstants {
    uint32_t g_num_elements; // = NUM_ELEMENTS
};

Execute

Execute the compute pass. Wait for the compute queue to idle. The result is in the m_buffer0 buffer.

Own Usage: Multi Radix Sort

Explanation how to use the multi_radixsort in your own Vulkan project. Assume you have a vector/array of uint32_t (you have to preprocess negative numbers; uint64_t requires to adjust the number of iterations defined in the shader) with a size of NUM_ELEMENTS.

Number of Blocks per Work Group

Each thread in a work group normally processes a single element. This is slow because a lot of work groups have to be launched. Instead, the number of elements each thread of a work group processes ("number of processed blocks per work group") can be increased. Assume this is stored in NUM_BLOCKS_PER_WORKGROUP (uint32_t, >= 1). See Timings for more information on how to choose the parameter.

Shaders / Compute Pass

Copy the following shaders to your project:

multi_radixsort_histograms.comp
multi_radixsort.comp

Create a compute pass consisting of the two compute shaders (in the order shown above) with pipeline barriers after each of them:

VkMemoryBarrier memoryBarrier{.sType = VK_STRUCTURE_TYPE_MEMORY_BARRIER, .srcAccessMask = VK_ACCESS_SHADER_WRITE_BIT, .dstAccessMask = VK_ACCESS_SHADER_READ_BIT};

Set the global invocation sizes of the two shaders:

uint32_t globalInvocationSize = NUM_ELEMENTS / NUM_BLOCKS_PER_WORKGROUP;
uint32_t remainder = NUM_ELEMENTS % NUM_BLOCKS_PER_WORKGROUP;
globalInvocationSize += remainder > 0 ? 1 : 0;

multi_radixsort_histograms: (globalInvocationSize, 1, 1) // (x,y,z global invocation sizes)
multi_radixsort: (globalInvocationSize, 1, 1)

We will later execute this pass (consisting of the two successive shaders) four times to first sort the lower 8 bits, then the next higher 8 bits...

Buffers

Create the following three buffers and assign them to the following sets and indices of your compute pass. Since we use the m_buffer0 and m_buffer1 alternating as input/output in the four iterations (ping pong buffers), the buffers have to be bound to different indices in different iterations.

buffer	size (bytes)	initialize	(set,index)
m_buffer0	NUM_ELEMENTS * sizeof(uint32_t)	vector of elements	iterations 0 and 2: (0,0),(1,0) iterations 1 and 3: (1,1)
m_buffer1	NUM_ELEMENTS * sizeof(uint32_t)	-	iterations 0 and 2: (1,1) iterations 1 and 3: (0,0), (1,0)
m_bufferHistogram	NUMBER_OF_WORKGROUPS * RADIX_SORT_BINS * sizeof(uint32_t)	-	(0,1),(1,2)

• NUMBER_OF_WORKGROUPS: number of work groups / dispatch size (depends on the global invocation size) (globalInvocationSize + workGroupSize - 1) / workGroupSize (workgroupSize=256 defined in the shader)
• RADIX_SORT_BINS=256: we sort 8 bits in each iteration, i.e. 2^8=256

Use VK_BUFFER_USAGE_STORAGE_BUFFER_BIT and VK_MEMORY_PROPERTY_DEVICE_LOCAL_BIT.

Push Constants

Define the following push constant structs for the two shaders and set their data:

struct PushConstantsHistograms {
    uint32_t g_num_elements; // == NUM_ELEMENTS
    uint32_t g_shift; // (*)
    uint32_t g_num_workgroups; // == NUMBER_OF_WORKGROUPS as defined in the section above
    uint32_t g_num_blocks_per_workgroup; // == NUM_BLOCKS_PER_WORKGROUP
};

struct PushConstants {
    uint32_t g_num_elements; // == NUM_ELEMENTS
    uint32_t g_shift; // (*)
    uint32_t g_num_workgroups; // == NUMBER_OF_WORKGROUPS as defined in the section above
    uint32_t g_num_blocks_per_workgroup; // == NUM_BLOCKS_PER_WORKGROUP
};

(*) The shift has to be set to 0 in iteration zero and to 8, 16, 24 in iteration one, two, three respectively.

Execute

Execute the compute pass four times (remember to adjust the buffer bindings and shifts in each iteration). Wait for the compute queue to idle. The result is in the m_buffer0 buffer.

Timings

Tests performed on NVIDIA GeForce RTX 3070 8GB and AMD Ryzen 5 2600 with 2x Crucial RAM 16GB DDR4 3200MHz. NUM_ELEMENTS random uint32_t are sorted (generated with mt19937, see here in the code). Notice that these are log scale plots! When sorting only a small number of elements, the runtime difference between the two GPU sorting variants is smaller. With an increase in the number of elements to sort, the advantage of using multiple workgroups becomes clear.

NUM_BLOCKS_PER_WORKGROUP

Now let us take a look at the NUM_BLOCKS_PER_WORKGROUP parameter in the multi_radixsort. As already mentioned in the section Number of Blocks per Work Group, it is slow if each thread in a work group processes only a single element. For 1,000,000 elements, the single_radixsort with only one work group takes 18.973ms. Setting NUM_BLOCKS_PER_WORKGROUP=1 takes 30.04ms, since a lot of work groups (3907 = ceil(1,000,000/256/1)) have to be executed (high scheduling overhead). On the other hand, setting NUM_BLOCKS_PER_WORKGROUP=4096 takes 20.91ms and uses only a single work group (1 = ceil(1,000,000/256/4096)). As we can see, setting NUM_BLOCKS_PER_WORKGROUP=4096 is the same as using the single_radixsort (and requires approximately the same time). For a certain number of elements, we can find the best tradeoff between scheduling overhead and using too few threads. For 1,000,000 elements, this sweet spot is for my GPU NUM_BLOCKS_PER_WORKGROUP=32 (using 123 work groups). I have done this optimization for the other tested number of elements (100, 1000, ...). You can see the results in the diagrams in the spoiler below. The optimized results are shown in the diagram above for the multi_radixsort line.

Timings for NUM_BLOCKS_PER_WORKGROUP for 100-100,000,000 elements