probe.c

/*
  probe.c - code pertaining to probing methods
  Part of Horus Firmware

  Copyright (c) 2014-2015 Mundo Reader S.L.

  Horus Firmware is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  Horus Firmware is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with Horus Firmware.  If not, see <http://www.gnu.org/licenses/>.
*/
/* 
  This file is based on work from Grbl v0.9, distributed under the 
  terms of the GPLv3. See COPYING for more details.
    Copyright (c) 2014 Sungeun K. Jeon
*/
  
#include "system.h"
#include "settings.h"
#include "probe.h"

// Inverts the probe pin state depending on user settings.
uint8_t probe_invert_mask;


// Probe pin initialization routine.
void probe_init() 
{
  PROBE_DDR &= ~(PROBE_MASK); // Configure as input pins
  if (bit_istrue(settings.flags,BITFLAG_INVERT_PROBE_PIN)) { 
    PROBE_PORT &= ~(PROBE_MASK); // Normal low operation. Requires external pull-down.
    probe_invert_mask = 0;
  } else {
    PROBE_PORT |= PROBE_MASK;    // Enable internal pull-up resistors. Normal high operation.
    probe_invert_mask = PROBE_MASK; 
  }
}


// Returns the probe pin state. Triggered = true. Called by gcode parser and probe state monitor.
uint8_t probe_get_state() { return((PROBE_PIN & PROBE_MASK) ^ probe_invert_mask); }


// Monitors probe pin state and records the system position when detected. Called by the
// stepper ISR per ISR tick.
// NOTE: This function must be extremely efficient as to not bog down the stepper ISR.
void probe_state_monitor()
{
  if (sys.probe_state == PROBE_ACTIVE) { 
    if (probe_get_state()) {
      sys.probe_state = PROBE_OFF;
      memcpy(sys.probe_position, sys.position, sizeof(float)*N_AXIS);
      bit_true(sys.execute, EXEC_FEED_HOLD);
    }
  }
}