Skip to content

Latest commit

 

History

History
84 lines (59 loc) · 2.27 KB

README.md

File metadata and controls

84 lines (59 loc) · 2.27 KB
Raw

Documentation Status

PyPDM

Python3 library for controlling Alphanov's PDM laser sources. Currently supported PDM protocol version is 3.4. Daisy-chain configuration for multiple devices is supported, so it is possible to use many PDMs with only one serial link.

Installation

The library can be install using pip3:

pip3 install pypdm

Documentation

A quick documentation is available on Read the Docs. A simple usage example is also provided below.

Requirements

This library requires the following packages:

  • pyserial

Safety

When a PDM object is deleted, the library may try to switch off the laser source for safety. However, you shall not rely on this behavior and always beware of dangers when using laser equipments! Please always wear laser safety goggles or use any appropriate safety equipment to prevent any harmful accident.

Usage example

Basic laser activation in continuous mode

import pypdm

pdm = pypdm.PDM(1, 'COM0')
# Set offset current in mA.
pdm.offset_current = 30
pdm.activation = True
# Apply new settings to the device.
pdm.apply()

Basic laser configuration for pulsed operation

import pypdm

pdm = pypdm.PDM(1, 'COM0')
# Set pulse power to 50%
pdm.current_source = pypdm.CurrentSource.NUMERIC
pdm.current_percentage = 50
pdm.activation = True
# Apply new settings to the device.
pdm.apply()

List of available properties

import pypdm

pdm = pypdm.PDM(1, 'COM0')
print('Mode:', pdm.mode)
print('Synchronization source:', pdm.sync_source)
print('Delay line type:', pdm.delay_line_type)
print('Frequency (Hz):', pdm.frequency)
print('Pulse width (ps):', pdm.pulse_width)
print('Delay (ps):', pdm.delay)
print('Offset current (mA):', pdm.offset_current)
print('Current (%):', pdm.current_percentage)
print('Current (mA):', pdm.current)
print('Temperature (C°):', pdm.temperature)
print('Maximum current (mA):', pdm.maximum_current)
print('Interlock status:', pdm.interlock_status)
print('Laser activation:', pdm.laser_activation)

Use of two sources in daisy-chain configuration

import pypdm

pdm1 = pypdm.PDM(1, 'COM0')
pdm2 = pypdm.PDM(2, pdm1)