Thank you for your interest in contributing to Tendermint! Before contributing, it may be helpful to understand the goal of the project. The goal of Tendermint is to develop a BFT consensus engine robust enough to support permissionless value-carrying networks. While all contributions are welcome, contributors should bear this goal in mind in deciding if they should target the main Tendermint project or a potential fork. When targeting the main Tendermint project, the following process leads to the best chance of landing changes in master.
All work on the code base should be motivated by a Github Issue. Search is a good place start when looking for places to contribute. If you would like to work on an issue which already exists, please indicate so by leaving a comment.
All new contributions should start with a Github Issue. The issue helps capture the problem you're trying to solve and allows for early feedback. Once the issue is created the process can proceed in different directions depending on how well defined the problem and potential solution are. If the change is simple and well understood, maintainers will indicate their support with a heartfelt emoji.
If the issue would benefit from thorough discussion, maintainers may request that you create a Request For Comment in the Tendermint spec repo. Discussion at the RFC stage will build collective understanding of the dimensions of the problems and help structure conversations around trade-offs.
When the problem is well understood but the solution leads to large structural changes to the code base, these changes should be proposed in the form of an Architectural Decision Record (ADR). The ADR will help build consensus on an overall strategy to ensure the code base maintains coherence in the larger context. If you are not comfortable with writing an ADR, you can open a less-formal issue and the maintainers will help you turn it into an ADR.
How to pick a number for the ADR?
Find the largest existing ADR number and bump it by 1.
When the problem as well as proposed solution are well understood, changes should start with a draft pull request against master. The draft signals that work is underway. When the work is ready for feedback, hitting "Ready for Review" will signal to the maintainers to take a look.
Each stage of the process is aimed at creating feedback cycles which align contributors and maintainers to make sure:
- Contributors don’t waste their time implementing/proposing features which won’t land in master.
- Maintainers have the necessary context in order to support and review contributions.
Please note that Go requires code to live under absolute paths, which complicates forking.
While my fork lives at https://github.com/ebuchman/tendermint,
the code should never exist at $GOPATH/src/github.com/ebuchman/tendermint.
Instead, we use git remote to add the fork as a new remote for the original repo,
$GOPATH/src/github.com/tendermint/tendermint, and do all the work there.
For instance, to create a fork and work on a branch of it, I would:
- Create the fork on GitHub, using the fork button.
- Go to the original repo checked out locally (i.e.
$GOPATH/src/github.com/tendermint/tendermint) git remote rename origin upstreamgit remote add origin [email protected]:ebuchman/basecoin.git
Now origin refers to my fork and upstream refers to the Tendermint version.
So I can git push -u origin master to update my fork, and make pull requests to tendermint from there.
Of course, replace ebuchman with your git handle.
To pull in updates from the origin repo, run
git fetch upstreamgit rebase upstream/master(or whatever branch you want)
We use go modules to manage dependencies.
That said, the master branch of every Tendermint repository should just build
with go get, which means they should be kept up-to-date with their
dependencies so we can get away with telling people they can just go get our
software.
Since some dependencies are not under our control, a third party may break our
build, in which case we can fall back on go mod tidy. Even for dependencies under our control, go helps us to
keep multiple repos in sync as they evolve. Anything with an executable, such
as apps, tools, and the core, should use dep.
Run go list -u -m all to get a list of dependencies that may not be
up-to-date.
When updating dependencies, please only update the particular dependencies you
need. Instead of running go get -u=patch, which will update anything,
specify exactly the dependency you want to update, eg.
GO111MODULE=on go get -u github.com/tendermint/go-amino@master.
We use Protocol Buffers along
with gogoproto to generate code for use
across Tendermint Core.
To generate proto stubs, lint, and check protos for breaking changes, you will
need to install buf and gogoproto. Then, from the root
of the repository, run:
# Lint all of the .proto files in proto/tendermint
make proto-lint
# Check if any of your local changes (prior to committing to the Git repository)
# are breaking
make proto-check-breaking
# Generate Go code from the .proto files in proto/tendermint
make proto-genTo automatically format .proto files, you will need
clang-format installed. Once
installed, you can run:
make proto-formatIf you are a VS Code user, you may want to add the following to your .vscode/settings.json:
{
"protoc": {
"options": [
"--proto_path=${workspaceRoot}/proto",
"--proto_path=${workspaceRoot}/third_party/proto"
]
}
}Every fix, improvement, feature, or breaking change should be made in a
pull-request that includes an update to the CHANGELOG_PENDING.md file.
Changelog entries should be formatted as follows:
- [module] \#xxx Some description about the change (@contributor)Here, module is the part of the code that changed (typically a
top-level Go package), xxx is the pull-request number, and contributor
is the author/s of the change.
It's also acceptable for xxx to refer to the relevant issue number, but pull-request
numbers are preferred.
Note this means pull-requests should be opened first so the changelog can then
be updated with the pull-request's number.
There is no need to include the full link, as this will be added
automatically during release. But please include the backslash and pound, eg. \#2313.
Changelog entries should be ordered alphabetically according to the
module, and numerically according to the pull-request number.
Changes with multiple classifications should be doubly included (eg. a bug fix that is also a breaking change should be recorded under both).
Breaking changes are further subdivided according to the APIs/users they impact.
Any change that effects multiple APIs/users should be recorded multiply - for
instance, a change to the Blockchain Protocol that removes a field from the
header should also be recorded under CLI/RPC/Config since the field will be
removed from the header in RPC responses as well.
The main development branch is master.
Every release is maintained in a release branch named vX.Y.Z.
Pending minor releases have long-lived release candidate ("RC") branches. Minor release changes should be merged to these long-lived RC branches at the same time that the changes are merged to master.
Note all pull requests should be squash merged except for merging to a release branch (named vX.Y). This keeps the commit history clean and makes it
easy to reference the pull request where a change was introduced.
The latest state of development is on master, which must never fail make test. Never force push master, unless fixing broken git history (which we rarely do anyways).
To begin contributing, create a development branch either on github.com/tendermint/tendermint, or your fork (using git remote add origin).
Make changes, and before submitting a pull request, update the CHANGELOG_PENDING.md to record your change. Also, run either git rebase or git merge on top of the latest master. (Since pull requests are squash-merged, either is fine!)
Update the UPGRADING.md if the change you've made is breaking and the
instructions should be in place for a user on how he/she can upgrade it's
software (ABCI application, Tendermint-based blockchain, light client, wallet).
Once you have submitted a pull request label the pull request with either R:minor, if the change should be included in the next minor release, or R:major, if the change is meant for a major release.
Sometimes (often!) pull requests get out-of-date with master, as other people merge different pull requests to master. It is our convention that pull request authors are responsible for updating their branches with master. (This also means that you shouldn't update someone else's branch for them; even if it seems like you're doing them a favor, you may be interfering with their git flow in some way!)
It is also our convention that authors merge their own pull requests, when possible. External contributors may not have the necessary permissions to do this, in which case, a member of the core team will merge the pull request once it's been approved.
Before merging a pull request:
- Ensure pull branch is up-to-date with a recent
master(GitHub won't let you merge without this!) - Run
make testto ensure that all tests pass - Squash merge pull request
If your change should be included in a minor release, please also open a PR against the long-lived minor release candidate branch (e.g., rc1/v0.33.5) immediately after your change has been merged to master.
You can do this by cherry-picking your commit off master:
$ git checkout rc1/v0.33.5
$ git checkout -b {new branch name}
$ git cherry-pick {commit SHA from master}
# may need to fix conflicts, and then use git add and git cherry-pick --continue
$ git push origin {new branch name}After this, you can open a PR. Please note in the PR body if there were merge conflicts so that reviewers can be sure to take a thorough look.
We follow the Go style guide on commit messages. Write concise commits that start with the package name and have a description that finishes the sentence "This change modifies Tendermint to...". For example,
cmd/debug: execute p.Signal only when p is not nil
[potentially longer description in the body]
Fixes #nnnnEach PR should have one commit once it lands on master; this can be accomplished by using the "squash and merge" button on Github. Be sure to edit your commit message, though!
Unit tests are located in _test.go files as directed by the Go testing
package. If you're adding or removing a
function, please check there's a TestType_Method test for it.
Run: make test
Integration tests are also located in _test.go files. What differentiates
them is a more complicated setup, which usually involves setting up two or more
components.
Run: make test_integrations
End-to-end tests are used to verify a fully integrated Tendermint network.
See README for details.
Run:
cd test/e2e && \
make && \
./build/runner -f networks/ci.tomlNOTE: if you're just submitting your first PR, you won't need to touch these most probably (99.9%).
For components, that have been formally verified using TLA+, it may be possible to generate tests using a combination of the Apalache Model Checker and tendermint-rs testgen util.
Now, I know there's a lot to take in. If you want to learn more, check out this video by Andrey Kupriyanov & Igor Konnov.
At the moment, we have model-based tests for the light client, located in the
./light/mbt directory.
Run: cd light/mbt && go test
NOTE: if you're just submitting your first PR, you won't need to touch these most probably (99.9%).
Fuzz tests can be found inside the
./test/fuzz directory. See README.md for details.
Run: cd test/fuzz && make fuzz-{PACKAGE-COMPONENT}
NOTE: if you're just submitting your first PR, you won't need to touch these most probably (99.9%).
Jepsen tests are used to verify the linearizability property of the Tendermint consensus. They are located in a separate repository -> https://github.com/tendermint/jepsen. Please refer to its README for more information.
If you contribute to the RPC endpoints it's important to document your changes in the Openapi file.
To test your changes you must install nodejs and run:
npm i -g dredd
make build-linux build-contract-tests-hooks
make contract-testsWARNING: these are currently broken due to https://github.com/apiaryio/dredd not supporting complete OpenAPI 3.
This command will popup a network and check every endpoint against what has been documented.