Releases: InjectiveLabs/injective-chain-releases
Mainnet-10005-rc1-1649280277
Injective Chain releases
The repository hosts Injective Chain releases of binary artifacts.
It also contains hassle-free guides and scripts for getting started and managing Injective Chain nodes.
Guides included
- Create a new node and join the network
- Sync node from the snapshot (quickest way to sync blocks).
- Sync node from scratch via public sentries (better decentralization factor).
- Upgrade Node to the latest version
Requirements
The following requirements are required to run the node natively.
Hardware
The following table shows the recommended hardware requirements for the running node on the mainnet.
| Validator Node | Sentry Node |
|---|---|
| Memory: 16Gb | Memory: 16Gb+ |
| Storage: 1Tb | Storage: 1Tb |
| Network: 5Gbps+ | Network: 5Gbps+ |
Software
- Go Installed
- Git Installed
- AWS CLI (only for snapshot sync, aws account not required)
Sentry Seed Nodes
For the testnet, find a list of seed nodes in seed.txt in the matching release folder here
Example, for testnet release 0.4.14
you will find the seed node list in 40014/seed.txt
For the mainnet, find a list of seed nodes matching your release here
Helpful links
Get Involved
Injective Protocol is a community driven project; we welcome all contribution.
- Discuss with Discord community
- Join Injective on Telegram
- Github repositories
- Follows us on Twitter
Mainnet-10004-rc1-1645352045
Injective Chain releases
The repository hosts Injective Chain releases of binary artifacts.
It also contains hassle-free guides and scripts for getting started and managing Injective Chain nodes.
Guides included
- Create a new node and join the network
- Sync node from the snapshot (quickest way to sync blocks).
- Sync node from scratch via public sentries (better decentralization factor).
- Upgrade Node to the latest version
Requirements
The following requirements are required to run the node natively.
Hardware
The following table shows the recommended hardware requirements for the running node on the mainnet.
| Validator Node | Sentry Node |
|---|---|
| Memory: 16Gb | Memory: 16Gb+ |
| Storage: 1Tb | Storage: 1Tb |
| Network: 5Gbps+ | Network: 5Gbps+ |
Software
- Go Installed
- Git Installed
- AWS CLI (only for snapshot sync, aws account not required)
Sentry Seed Nodes
For the testnet, find a list of seed nodes in seed.txt in the matching release folder here
Example, for testnet release 0.4.14
you will find the seed node list in 40014/seed.txt
For the mainnet, find a list of seed nodes matching your release here
Helpful links
Get Involved
Injective Protocol is a community driven project; we welcome all contribution.
- Discuss with Discord community
- Join Injective on Telegram
- Github repositories
- Follows us on Twitter
Mainnet-10004-rc1-1642928125
Injective Chain releases
The repository hosts Injective Chain releases of binary artifacts.
It also contains hassle-free guides and scripts for getting started and managing Injective Chain nodes.
Guides included
- Create a new node and join the network
- Sync node from the snapshot (quickest way to sync blocks).
- Sync node from scratch via public sentries (better decentralization factor).
- Upgrade Node to the latest version
Requirements
The following requirements are required to run the node natively.
Hardware
The following table shows the recommended hardware requirements for the running node on the mainnet.
| Validator Node | Sentry Node |
|---|---|
| Memory: 16Gb | Memory: 16Gb+ |
| Storage: 1Tb | Storage: 1Tb |
| Network: 5Gbps+ | Network: 5Gbps+ |
Software
- Go Installed
- Git Installed
- AWS CLI (only for snapshot sync, aws account not required)
Sentry Seed Nodes
For the testnet, find a list of seed nodes in seed.txt in the matching release folder here
Example, for testnet release 0.4.14
you will find the seed node list in 40014/seed.txt
For the mainnet, find a list of seed nodes matching your release here
Helpful links
Get Involved
Injective Protocol is a community driven project; we welcome all contribution.
- Discuss with Discord community
- Join Injective on Telegram
- Github repositories
- Follows us on Twitter
Staking-40019-1642706097
Injective Chain releases
The repository hosts Injective Chain releases of binary artifacts.
It also contains hassle-free guides and scripts for getting started and managing Injective Chain nodes.
Guides included
- Create a new node and join the network
- Sync node from the snapshot (quickest way to sync blocks).
- Sync node from scratch via public sentries (better decentralization factor).
- Upgrade Node to the latest version
Requirements
The following requirements are required to run the node natively.
Hardware
The following table shows the recommended hardware requirements for the running node on the mainnet.
| Validator Node | Sentry Node |
|---|---|
| Memory: 16Gb | Memory: 16Gb+ |
| Storage: 1Tb | Storage: 1Tb |
| Network: 5Gbps+ | Network: 5Gbps+ |
Software
- Go Installed
- Git Installed
- AWS CLI (only for snapshot sync, aws account not required)
Sentry Seed Nodes
For the testnet, find a list of seed nodes in seed.txt in the matching release folder here
Example, for testnet release 0.4.14
you will find the seed node list in 40014/seed.txt
For the mainnet, find a list of seed nodes matching your release here
Helpful links
Get Involved
Injective Protocol is a community driven project; we welcome all contribution.
- Discuss with Discord community
- Join Injective on Telegram
- Github repositories
- Follows us on Twitter
Staking-40017-1640702850
Injective Chain releases
The repository hosts Injective Chain releases of binary artifacts.
It also contains hassle-free guides and scripts for getting started and managing Injective Chain nodes.
Guides included
- Create a new node and join the network
- Sync node from the snapshot (quickest way to sync blocks).
- Sync node from scratch via public sentries (better decentralization factor).
- Upgrade Node to the latest version
Requirements
The following requirements are required to run the node natively.
Hardware
The following table shows the recommended hardware requirements for the running node on the mainnet.
| Validator Node | Sentry Node |
|---|---|
| Memory: 16Gb | Memory: 16Gb+ |
| Storage: 1Tb | Storage: 1Tb |
| Network: 5Gbps+ | Network: 5Gbps+ |
Software
- Go Installed
- Git Installed
- AWS CLI (only for snapshot sync, aws account not required)
Sentry Seed Nodes
For the testnet, find a list of seed nodes in seed.txt in the matching release folder here
Example, for testnet release 0.4.14
you will find the seed node list in 40014/seed.txt
For the mainnet, find a list of seed nodes matching your release here
Helpful links
Get Involved
Injective Protocol is a community driven project; we welcome all contribution.
- Discuss with Discord community
- Join Injective on Telegram
- Github repositories
- Follows us on Twitter
Mainnet-10003-rc1-1640627705
Injective Chain releases
The repository hosts Injective Chain releases of binary artifacts.
It also contains hassle-free guides and scripts for getting started and managing Injective Chain nodes.
Guides included
- Create a new node and join the network
- Sync node from the snapshot (quickest way to sync blocks).
- Sync node from scratch via public sentries (better decentralization factor).
- Upgrade Node to the latest version
Requirements
The following requirements are required to run the node natively.
Hardware
The following table shows the recommended hardware requirements for the running node on the mainnet.
| Validator Node | Sentry Node |
|---|---|
| Memory: 16Gb | Memory: 16Gb+ |
| Storage: 1Tb | Storage: 1Tb |
| Network: 5Gbps+ | Network: 5Gbps+ |
Software
- Go Installed
- Git Installed
- AWS CLI (only for snapshot sync, aws account not required)
Sentry Seed Nodes
For the testnet, find a list of seed nodes in seed.txt in the matching release folder here
Example, for testnet release 0.4.14
you will find the seed node list in 40014/seed.txt
For the mainnet, find a list of seed nodes matching your release here
Helpful links
Get Involved
Injective Protocol is a community driven project; we welcome all contribution.
- Discuss with Discord community
- Join Injective on Telegram
- Github repositories
- Follows us on Twitter
Mainnet-10002-rc2-peggo-1640627600
Injective Chain releases
The repository hosts Injective Chain releases of binary artifacts.
It also contains hassle-free guides and scripts for getting started and managing Injective Chain nodes.
Guides included
- Create a new node and join the network
- Sync node from the snapshot (quickest way to sync blocks).
- Sync node from scratch via public sentries (better decentralization factor).
- Upgrade Node to the latest version
Requirements
The following requirements are required to run the node natively.
Hardware
The following table shows the recommended hardware requirements for the running node on the mainnet.
| Validator Node | Sentry Node |
|---|---|
| Memory: 16Gb | Memory: 16Gb+ |
| Storage: 1Tb | Storage: 1Tb |
| Network: 5Gbps+ | Network: 5Gbps+ |
Software
- Go Installed
- Git Installed
- AWS CLI (only for snapshot sync, aws account not required)
Sentry Seed Nodes
For the testnet, find a list of seed nodes in seed.txt in the matching release folder here
Example, for testnet release 0.4.14
you will find the seed node list in 40014/seed.txt
For the mainnet, find a list of seed nodes matching your release here
Helpful links
Get Involved
Injective Protocol is a community driven project; we welcome all contribution.
- Discuss with Discord community
- Join Injective on Telegram
- Github repositories
- Follows us on Twitter
Mainnet-10002-rc2-peggo-1637059884
Injective Chain releases
The repository hosts Injective Chain releases of binary artifacts.
It also contains hassle-free guides and scripts for getting started and managing Injective Chain nodes.
Guides included
- Create a new node and join the network
- Sync node from the snapshot (quickest way to sync blocks).
- Sync node from scratch via public sentries (better decentralization factor).
- Upgrade Node to the latest version
Requirements
The following requirements are required to run the node natively.
Hardware
The following table shows the recommended hardware requirements for the running node on the mainnet.
| Validator Node | Sentry Node |
|---|---|
| Memory: 16Gb | Memory: 16Gb+ |
| Storage: 1Tb | Storage: 1Tb |
| Network: 5Gbps+ | Network: 5Gbps+ |
Software
- Go Installed
- Git Installed
- AWS CLI (only for snapshot sync, aws account not required)
Sentry Seed Nodes
For the testnet, find a list of seed nodes in seed.txt in the matching release folder here
Example, for testnet release 0.4.14
you will find the seed node list in 40014/seed.txt
For the mainnet, find a list of seed nodes matching your release here
Helpful links
Get Involved
Injective Protocol is a community driven project; we welcome all contribution.
- Discuss with Discord community
- Join Injective on Telegram
- Github repositories
- Follows us on Twitter
Mainnet-10002-rc2-1636733798
Injective Chain releases
The repository hosts Injective Chain releases of binary artifacts.
It also contains hassle-free guides and scripts for getting started and managing Injective Chain nodes.
Guides included
- Create a new node and join the network
- Sync node from the snapshot (quickest way to sync blocks).
- Sync node from scratch via public sentries (better decentralization factor).
- Upgrade Node to the latest version
Requirements
The following requirements are required to run the node natively.
Hardware
The following table shows the recommended hardware requirements for the running node on the mainnet.
| Validator Node | Sentry Node |
|---|---|
| Memory: 16Gb | Memory: 16Gb+ |
| Storage: 1Tb | Storage: 1Tb |
| Network: 5Gbps+ | Network: 5Gbps+ |
Software
- Go Installed
- Git Installed
- AWS CLI (only for snapshot sync, aws account not required)
Sentry Seed Nodes
For the testnet, find a list of seed nodes in seed.txt in the matching release folder here
Example, for testnet release 0.4.14
you will find the seed node list in 40014/seed.txt
For the mainnet, find a list of seed nodes matching your release here
Helpful links
Get Involved
Injective Protocol is a community driven project; we welcome all contribution.
- Discuss with Discord community
- Join Injective on Telegram
- Github repositories
- Follows us on Twitter
Mainnet-10002-rc1-1636178708
Injective Chain releases
The repository hosts Injective Chain releases of binary artifacts.
It also contains hassle-free guides and scripts for getting started and managing Injective Chain nodes.
Guides included
- Create a new node and join the network
- Sync node from the snapshot (quickest way to sync blocks).
- Sync node from scratch via public sentries (better decentralization factor).
- Upgrade Node to the latest version
Requirements
The following requirements are required to run the node natively.
Hardware
The following table shows the recommended hardware requirements for the running node on the mainnet.
| Validator Node | Sentry Node |
|---|---|
| Memory: 16Gb | Memory: 16Gb+ |
| Storage: 1Tb | Storage: 1Tb |
| Network: 5Gbps+ | Network: 5Gbps+ |
Software
- Go Installed
- Git Installed
- AWS CLI (only for snapshot sync, aws account not required)
Sentry Seed Nodes
For the testnet, find a list of seed nodes in seed.txt in the matching release folder here
Example, for testnet release 0.4.14
you will find the seed node list in 40014/seed.txt
For the mainnet, find a list of seed nodes matching your release here
Helpful links
Get Involved
Injective Protocol is a community driven project; we welcome all contribution.
- Discuss with Discord community
- Join Injective on Telegram
- Github repositories
- Follows us on Twitter