Skip to content

Latest commit

 

History

History
140 lines (105 loc) · 5.19 KB

RELEASES.md

File metadata and controls

140 lines (105 loc) · 5.19 KB
Raw

Releases

2.0.3

  • Extended conversion factor range to 25-12800 cpm/µSv/h.
  • When using sensitive detectors with a conversion factor of 600 cpm/µSv/h or higher, Rad Pro caps the pulse indication at 600 cpm/µSv/h to provide approximately one pulse per second at background levels of radiation. This does not impact the actual measurement.
  • Minor UI and performance refinements.

2.0.2

  • Improved the instantaneous rate averaging algorithm.
  • Simplified the instantaneous rate averaging response curves, resulting in improved precision when using J613/J614 tubes.
  • Disabled instantaneous rate alarms in situations where the confidence interval is high, such as immediately after device startup.
  • Minor UI improvements.

2.0.1

  • Added data log reset.
  • Changed the default conversion factor for J613/J614 tubes to 60.0 cpm/µSv/h.
  • Resolved issues with custom HV profiles.
  • Resolved issues with the "SET tubeHVFrequency" and "SET tubeHVDutyCycle" data connection requests.
  • Resolved issues with new history data log download.
  • Minor refinements.

2.0

  • First 2.0 release.
  • Updated the UI design system to OpenBridge 5.0, improving legibility under sunlight.
  • Changed the default conversion factor for J613/J614 tubes to 30.0 cpm/µSv/h.
  • Removed the FNIRSI GC-01 display panel settings.
  • Increased the granularity and range of the "SET tubeHVFrequency" and "SET tubeHVDutyCycle" data connection requests to CPU clock resolution and 100 Hz-100 kHz and 0%-100%, respectively (not stored on power-off).

2.0rc5 The final countdown

  • Added Bosean FS-5000 support.
  • Added display panel menu for selecting the display panel (on supported devices).
  • Added secondary dose view in average measurement mode.
  • Extended conversion factor range to 25-1600 cpm/µSv/h.
  • Added 1 second data log interval options and removed 30 seconds and 30 minutes data log interval options.
  • Added "SET tubeHVFrequency" and "SET tubeHVDutyCycle" data connection commands.
  • Added 12-hour time format.
  • Devices with data mode allow using the device while data mode is active; data mode state is also preserved after powering off.
  • Improved battery level indicator of the Bosean FS-600/FS-1000.
  • Improved battery level readout of the FS2011(STM32F051), Bosean FS-600/FS-1000.
  • Improved keyboard control scheme of the Bosean FS-1000.
  • Changed USB data connection end of line to "\r\n".
  • Minor refinements.

2.0rc4 The "little" update

  • Added instantaneous rate averaging options: adaptive fast, adaptive precision, 60 seconds, 30 seconds and 10 seconds.
  • Added secondary CPM and count displays in measurement views.
  • Improved haptic pulse strengths.
  • Improved FNIRSI GC-01 quiet pulse clicks.
  • Improved selected menu item contrast.
  • Improved data logging time precision.
  • Fixed History (24 h) bug.

2.0rc3 The "BIG" update

  • UI update with big digits in measurement view.
  • Instantaneous rate bar with alert zones (1 µSv, 10 µSv).
  • History alert zones (1 µSv, 10 µSv).
  • Average timer expiration after reaching a configurable confidence interval.
  • Background compensation.
  • Display flashes on the FNIRSI GC-01 (after display sleep).
  • Haptic pulses on the FNIRSI GC-01 (off, weak or strong).
  • Pulse thresholding (disables pulse indication if instantaneous rate is below a certain value).
  • Fault alarm on HV/tube failure (lack of pulses) or tube saturation (tube shorted).
  • Added 30 second and 10 second data log interval options.
  • Added 10 second display sleep option.
  • Added radpro-flashtool.
  • Removed measurement hold.

2.0rc2

  • Fixed flash programming.
  • Fixed FNIRSI GC-01 battery indicator.
  • Fixed conversion factor menu logic.

2.0rc1

  • Added FNIRSI GC-01 support.

1.3.0

  • Added data logging.
  • Added custom conversion factors.
  • Added support for the J305 Geiger tube.
  • Minor bug fixes.

1.2.2

  • Added support for devices with a GD32 microcontroller.
  • Added data submission to the https://gmcmap.com/ radiation monitoring website.

1.2.1

  • Minor bugfixes.

1.2.0

  • Implemented storage of radiation dose in non-volatile memory.
  • Added the capability to store device statistics every hour.
  • Added client for the https://radmon.org radiation monitoring website.
  • Improved the font_tiny5 5-pixel font.
  • Enhanced battery level calculation using battery discharge curves and HV pulse syncing for shot noise removal.
  • Improved flash settings and state storage.
  • Fixed a start-up sequence bug.
  • Fixed a backlight bug when turning off the device.
  • Corrected the SBM-20 conversion ratio.

1.1.1

  • Minor bug fix

1.1.0

  • Added Geiger-Müller tube type settings.
  • Added backlight pulse flash setting.
  • Added true random number generator.
  • Added support for the SBM-20 and SI-3BG Geiger-Müller tube.
  • Ported the project to the platform.io environment.
  • Improved battery level sampling.
  • Fixed rounding errors.
  • Improved usage instructions.

1.0.2

  • Added support for M4011 Geiger-Müller tube.
  • Fixed battery indicator.

1.0.1

  • Improved pulse click volume.
  • Fixed battery indicator.
  • Fixed several bugs in Nuclear chess.

1.0.0

  • First release