Su-26M-electrical.xml

<?xml version="1.0"?>
 
<!-- Generic 28 Volt electrical system -->

<PropertyList>

  <!-- Supplier list -->
  <supplier>
    <name>Battery 1</name>
    <prop>/systems/electrical/suppliers/battery[0]</prop>
    <kind>battery</kind>
    <volts>24</volts> <!-- needs to be > 24.5, but this is a guess -->
    <amps>20</amps>   <!-- I have no idea! -->
  </supplier>

  <supplier>
    <name>Alternator 1</name>
    <prop>/systems/electrical/suppliers/alternator[0]</prop>
    <kind>alternator</kind>
    <rpm-source>/engines/engine[0]/rpm</rpm-source>
    <volts>28</volts> 
    <amps>100</amps>  
  </supplier>

  <supplier>
    <name>External 1</name>
    <prop>/systems/electrical/suppliers/external[0]</prop>
    <kind>external</kind>
    <volts>0.1</volts> <!-- by default not connected -->
    <amps>100</amps>
  </supplier>

  <!-- Bus list -->
  <bus>
    <name>Master Bus</name>
    <prop>/systems/electrical/outputs/bus</prop>
   </bus>
  
  <!-- Generic Outputs -->
  <output>
    <name>Pitot Heat Power</name>
    <prop>/systems/electrical/outputs/pitot-heat</prop>
  </output>
  
  <output>
    <name>Radio Power</name>
    <prop>/systems/electrical/outputs/nav-com-1</prop>
  </output>
  
  <output>
    <name>Instrument Power</name>
    <prop>/systems/electrical/outputs/eng-instr-1</prop>
  </output>


 <!-- connect in power sources -->
  <connector>
    <input>Alternator 1</input>
    <output>Master Bus</output>
    <switch>
      <prop>/controls/circuit-breakers/generator</prop>
      <initial-state>off</initial-state>      
    </switch>
  </connector>

  <connector>
    <input>External 1</input>
    <output>Master Bus</output>
  </connector>  
  
  <connector>
    <input>Battery 1</input>
    <output>Master Bus</output>
    <switch>
      <prop>/controls/circuit-breakers/battery</prop>
      <initial-state>off</initial-state>      
    </switch>
    <switch>
      <prop>/controls/electric/battery-switch</prop>
      <initial-state>off</initial-state>      
    </switch>
  </connector>

  <!-- connect master bus outputs -->
  <connector>
    <input>Master Bus</input>
    <output>Instrument Power</output>
    <switch>
      <prop>/controls/circuit-breakers/eng-instr-1</prop>
      <initial-state>off</initial-state>
    </switch>
  </connector>
  
  <connector>
    <input>Master Bus</input>
    <output>Radio Power</output>
    <switch>
      <prop>/controls/circuit-breakers/nav-com-1</prop>
      <initial-state>off</initial-state>
    </switch>
  </connector>

  <connector>
    <input>Master Bus</input>
    <output>Pitot Heat Power</output>
    <switch>
      <prop>/controls/circuit-breakers/pitot-heat</prop>
      <initial-state>off</initial-state>
    </switch>
  </connector>

</PropertyList>