After SatPI update no stream data no picture, with Inverto IDLU-UWT110CUO10-32P Multiswitch #209
-
|
Hello, after the update. The SATIP stream is broken. I find the tuners in DVBviewer but there is no picture. Before the update the system were running. Here my system
Here my log
The fronted 2 is not configured, because I use It in Enigma2. Ich have OpenATV image with the new Devel-Image 7.5 but in other images 7.3 or 7.4 it is also not working, after the update. Guess before the update all were running with same settings! I think it must issues after the last changes ... Thank you |
Beta Was this translation helpful? Give feedback.
Replies: 14 comments 1 reply
-
|
Thank you for your feedback. It seems that you do not get a lock to the requested frequency.
Kind regards, |
Beta Was this translation helpful? Give feedback.
-
|
Hello Marc, thanks for your support 1.) Yes It has worked before, only I have update the system. I have made a heavy mistake "never touch an running system". 2.) It is an Durline eco Quad-LNB 3.) which DiSEqC settings do you mean in enigma2?
There is no DiSEcQ settings or in SATIP I have try with DiSEcQ Repeat = 0 or before with DiSEcQ Repeat = 8
Nothing happens... Thank you Lordi |
Beta Was this translation helpful? Give feedback.
-
|
Do you have old ipk`s from SATPI then I can figure out it is SATPI or other things like enigma2? |
Beta Was this translation helpful? Give feedback.
-
No I do not have one, but it should work with this version. I have some further questions:
|
Beta Was this translation helpful? Give feedback.
-
|
Hello Marc, Tuner A is not configured in Enigma2, because It is not work. SATPI or Enigma2 don´t like this, when the tuner is in both are configured
Yes I know that we have to start with "0" Here again the settings for Tuner A in SATPI
Here the actuell Fronted overview the other tuner I have disabled
It is not working Here a new log with only Tuner A is enabled: Lordi |
Beta Was this translation helpful? Give feedback.
-
|
I see you use |
Beta Was this translation helpful? Give feedback.
-
|
Sorry this was the wrong Picture
this is the right Did not work Lordi |
Beta Was this translation helpful? Give feedback.
-
|
You could increase
|
Beta Was this translation helpful? Give feedback.
-
|
Hello Marc, no it don´t work |
Beta Was this translation helpful? Give feedback.
-
|
Did you try setting it just both at 100 |
Beta Was this translation helpful? Give feedback.
-
|
Hello Marc, what should I say your are an "GOD" IT WORKS You are my Hero CU |
Beta Was this translation helpful? Give feedback.
-
|
@lordduckstein No problem |
Beta Was this translation helpful? Give feedback.
-
|
Hello, this is the solution for my system:
configuration settings 1.) Settings in enigma
Only tuner A is configured, the other tuner are disabled tuner A configuration
Open with browser http://your-ip-receiver:8875
Frontend 1 (FBC-Root):
Fronted 2 (FBC-Root): This are my configs
The other Fronted 3 (FBC) - Fronted 8 (FBC) configs
Thank you Marc for helping Best regards |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for your answer! |
Beta Was this translation helpful? Give feedback.
-
|
Hello, an additional information when you are in mixed operation dvb-c virtuell or dvb-c with dvb-s2 you have to do follwing settings:
Cu |
Beta Was this translation helpful? Give feedback.
Hello,
this is the solution for my system:
configuration settings
1.) Settings in enigma
Only tuner A is configured, the other tuner are disabled
tuner A configuration
Open with browser http://your-ip-receiver:8875
Frontend 1 (FBC-Root):
nothing is to do, because this is the Tuner A in enigma2 openATV, when you configured this tuner again
so enigma2 and SATIP fight for the tuner and nothing work.
Fronted 2 (FBC-Root):
This are my configs
The other F…