BROSE9323.h

#ifndef BROSE9323_H
#define BROSE9323_H

#include <Adafruit_GFX.h>

//#define FLIPDOT_PLCC_ADAPTER

const uint8_t _hannio_splash[] PROGMEM = {
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x39, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x70, 
	0x3e, 0x00, 0x39, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x70, 0xff, 0x00, 0x39, 0xff, 0xff, 0xff, 0xff, 
	0xfe, 0x71, 0xf7, 0xc0, 0x39, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x73, 0xc1, 0xc0, 0x38, 0x1f, 0x87, 
	0xf0, 0x7f, 0x06, 0x73, 0x80, 0xe0, 0x38, 0x0f, 0x01, 0xc0, 0x3c, 0x02, 0x77, 0x7f, 0x60, 0x38, 
	0xc7, 0x78, 0xc6, 0x1c, 0x60, 0x77, 0x7f, 0x70, 0x39, 0xe3, 0xfc, 0xcf, 0x9c, 0xf8, 0x76, 0x00, 
	0x30, 0x39, 0xf3, 0xfc, 0xcf, 0x9c, 0xf8, 0x77, 0x7f, 0x70, 0x39, 0xf3, 0x80, 0xcf, 0x9c, 0xf8, 
	0x77, 0x7f, 0x60, 0x39, 0xf3, 0x00, 0xcf, 0x9c, 0xf8, 0x73, 0x80, 0xe0, 0x39, 0xf2, 0x3c, 0xcf, 
	0x9c, 0xf8, 0x73, 0xc1, 0xc0, 0x39, 0xf2, 0x7c, 0xcf, 0x9c, 0xf8, 0x71, 0xf7, 0xc0, 0x39, 0xf2, 
	0x3c, 0xcf, 0x9c, 0xf8, 0x70, 0xff, 0x80, 0x39, 0xf3, 0x00, 0xcf, 0x9c, 0xf8, 0x70, 0x3e, 0x00
};

class BROSE9323 : public Adafruit_GFX {
	private:
		uint16_t _flip_time;
		const uint8_t _panel_width;
		const uint8_t _buffer_width;
		const uint16_t _buffer_size;
		uint8_t* _old_buffer = NULL;
		uint8_t* _new_buffer = NULL;
		bool _direct_mode = false;

#ifdef ESP8266
		Stream* stream;
#else
		uint8_t _active_panel = 255;
		uint8_t _active_col = 255;
		uint8_t _active_row = 255;
		bool _active_data;

#ifndef FLIPDOT_PLCC_ADAPTER
		const uint8_t ENABLE    =  7,
					  ADDR_0    =  3,
					  ADDR_1    =  5,
					  ADDR_2    =  6,
					  COL_DATA  =  4,
					  COL_0     =  8,
					  COL_1     = 10,
					  COL_2     =  9,
					  COL_3     = 11,
					  COL_4     = 12,
					  ROW_0     = A3,
					  ROW_1     = A4,
					  ROW_2     = A2,
					  ROW_3     = A0,
					  ROW_4     = A1,
					  ROW_RESET = 13,
					  ROW_SET   = A5;
#else
		const uint8_t RELAY     =  2,
					  ENABLE    =  3,
					  ADDR_0    =  7,
					  ADDR_1    =  6,
					  ADDR_2    =  5,
					  COL_DATA  =  4,
					  COL_0     = 12,
					  COL_1     = 11,
					  COL_2     = 10,
					  COL_3     =  9,
					  COL_4     =  8,
					  ROW_0     = 13, //1 A1 CHECK
					  ROW_1     = A0, //2 A2
					  ROW_2     = A1, //4 A3
					  ROW_3     = A2, //8 13 CHECK
					  ROW_4     = A3, //F A0
					  ROW_RESET = A4,
					  ROW_SET   = A5;
#endif
		
		void _selectColumn(uint8_t);
		void _selectPanel(uint8_t);
		void _selectRow(uint8_t);
		void _setData(bool);
		void _strobe(void);
#endif
	public:
		BROSE9323(uint8_t, uint8_t, uint8_t, uint16_t ft = 280);
#ifdef ESP8266
		void begin(Stream* = &Serial);
#endif
		void begin(void);
		void display(bool force = false);
		void drawPixel(int16_t x, int16_t y, uint16_t color);
		void fillScreen(uint16_t);
		void setDirect(bool);
		void setTiming(uint16_t);
#ifndef ESP8266
		void printBuffer(void);
#endif
};
#endif //BROSE9323_H